DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series> Type: CPFC74 ◆ Product Description ・9.5×5.7mm Max.(L×W), 5.1mm Max. Height . ◆ Feature ・Ideally used in CAN BUS ,AV,OA equipment. ・RoHS Compliance 1.3±0.1 2.54±0.15 ◆ Dimensions (mm) 5.5±0.2 0.15 7.0±0.2 6.4±0.2 9.5 MAX. 5.08 MAX. ＊ Dimension does not include solder used on coil. ◆ Land Pattern (mm) ◆ Schematics (Bottom) 1.8 1.6 ② ③ ③ ① ④ 2.54 or ① 6.7 ② ④ MARK OF POLARITY MARK OF POLARITY 9.9 ◆ Specification (For CAN bus) Insulation Impedance (Ω) Resistance (L1,L2 Parallel) (MΩ)(Coil-Coil) (10～100MHz) (DC80V 1min) Withstanding Voltage (coil-coil) (5sec) D.C.R. (Ω) (1-2)at 20℃ (3-4) short ※ Part Name. Stamp CPFC74NP-CB1ØM4 C10M 1000 MIN. 100 MIN. 200V DC 0.6 MAX. CPFC74NP-CBØ8M6 C08M 800 MIN. 100 MIN. 200V DC 0.5 MAX. ※ D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 DC COMMON MODE CHOKE COIL <SMD Type:CPFC Series> Type: CPFC74 ◆ Specification (For Power supply) Part Name. Impedance (Ω) Stamp (L1,L2 Parallel) CPFC74NP-PS1ØH2A15 P15H CPFC74NP-PSØ2H2A2Ø P20H CPFC74NP-PSØ3H2A25 P25H CPFC74NP-PSØ1H2A3Ø P30H 700 MIN. (100 MHz) 200 MIN. (20～300MHz) 300 MIN. (160 MHz) 100 MIN. Insulation Resistance (MΩ)(Coil-Coil) (DC100V 1min.) Withstanding Voltage (Coil-Coil) (5sec) D.C.R. (mΩ) (1-2)at 20℃ (3-4) Short ※2 Rated Current (1-2)(A) (3-4) Short ※1 10 MIN. D.C.125V 120 1.5 10 MIN. D.C.125V 120 2.0 10 MIN. D.C.125V 120 2.5 10 MIN. D.C.125V 60 3.0 ※1: Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃). ※2: D.C.R is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2