ON MPS8099G Amplifier transistors voltage and current are negative for pnp transistor Datasheet

(NPN) MPS8098, MPS8099*,
(PNP) MPS8598, MPS8599*
*Preferred Devices
Amplifier Transistors
Voltage and Current are Negative
for PNP Transistors
http://onsemi.com
Features
• Pb−Free Packages are Available*
MAXIMUM RATINGS
Rating
Symbol
Collector −Emitter Voltage
MPS8098, MPS8598
MPS8099, MPS8599
VCEO
Collector −Base Voltage
MPS8098, MPS8598
MPS8099, MPS8599
VCBO
Emitter −Base Voltage
Value
Unit
2
BASE
COLLECTOR
3
2
BASE
Vdc
60
80
1
EMITTER
1
EMITTER
Vdc
60
80
VEBO
4.0
Vdc
Collector Current − Continuous
IC
500
mAdc
Total Device Dissipation @ TA = 25°C
Derate above 25°C
PD
625
5.0
mW
mW/°C
Total Device Dissipation @ TC = 25°C
Derate above 25°C
PD
1.5
12
W
mW/°C
TJ, Tstg
−55 to +150
°C
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction−to−Ambient
(Note 1)
RqJA
200
°C/W
Thermal Resistance, Junction−to−Case
RqJC
83.3
°C/W
Operating and Storage Junction
Temperature Range
PNP
NPN
COLLECTOR
3
STYLE 1
MPS8098,
MPS8099
TO−92
CASE 29−11
STYLE 1
1
2
STYLE 1
MPS8598,
MPS8599
3
THERMAL CHARACTERISTICS
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. RqJA is measured with the device soldered into a typical printed circuit board.
MARKING DIAGRAM
MPS
8x9y
AYWW G
G
MPS8x9y = Device Code
x = 0 or 5
y = 8 or 9
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
January, 2006 − Rev. 5
1
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MPS8098/D
(NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599*
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
60
80
−
−
60
80
−
−
6.0
5.0
−
−
−
0.1
−
−
0.1
0.1
−
−
0.1
0.1
100
100
75
300
−
−
−
−
0.4
0.3
0.5
0.6
0.7
0.8
150
−
−
−
6.0
8.0
−
−
25
30
Unit
OFF CHARACTERISTICS
Collector −Emitter Breakdown Voltage (Note 2)
(IC = 10 mAdc, IB = 0)
V(BR)CEO
Vdc
MPS8098, MPS8598
MPS8099, MPS8599
Collector −Base Breakdown Voltage
(IC = 100 mAdc, IE = 0)
V(BR)CBO
Vdc
MPS8098, MPS8598
MPS8099, MPS8599
Emitter −Base Breakdown Voltage
(IE = 10 mAdc, IC = 0)
V(BR)EBO
Vdc
MPS8098, MPS8099
MPS8598, MPS8599
Collector Cutoff Current
(VCE = 60 Vdc, IB = 0)
ICES
Collector Cutoff Current
(VCB = 60 Vdc, IE = 0)
(VCB = 80 Vdc, IE = 0)
MPS8098, MPS8598
MPS8099, MPS8599
Emitter Cutoff Current
(VEB = 6.0 Vdc, IC = 0)
(VEB = 4.0 Vdc, IC = 0)
MPS8098, MPS8099
MPS8598, MPS8599
mAdc
mAdc
ICBO
mAdc
IEBO
ON CHARACTERISTICS (Note 2)
DC Current Gain
(IC = 1.0 mAdc, VCE = 5.0 Vdc)
(IC = 10 mAdc, VCE = 5.0 Vdc)
(IC = 100 mAdc, VCE = 5.0 Vdc)
hFE
Collector −Emitter Saturation Voltage
(IC = 100 mAdc, IB = 5.0 mAdc)
(IC = 100 mAdc, IB = 10 mAdc)
−
VCE(sat)
Base−Emitter On Voltage
(IC = 1.0 mAdc, VCE = 5.0 Vdc)
(IC = 10 mAdc, VCE = 5.0 Vdc)
Vdc
VBE(on)
Vdc
MPS8098, MPS8598
MPS8099, MPS8599
SMALL− SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product
(IC = 10 mAdc, VCE = 5.0 Vdc, f = 100 MHz)
fT
Output Capacitance
(VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz)
Cobo
pF
MPS8098, MPS8099
MPS8598, MPS8599
Input Capacitance
(VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz)
MHz
Cibo
pF
MPS8098, MPS8099
MPS8598, MPS8599
r(t), NORMALIZED TRANSIENT
THERMAL RESISTANCE
2. Pulse Test: Pulse Width v 300 ms, Duty Cycle = 2.0%.
1.0
0.7
0.5
D = 0.5
0.2
0.3
0.2
0.1
0.07
0.05
0.1
0.05
0.02
SINGLE PULSE
ZqJC(t) = r(t) • RqJC
TJ(pk) − TC = P(pk) ZqJC(t)
ZqJA(t) = r(t) • RqJA
TJ(pk) − TA = P(pk) ZqJA(t)
D CURVES APPLY FOR
POWER PULSE TRAIN
SHOWN READ TIME AT t1
(SEE AN469)
P(pk)
0.01
t1
SINGLE PULSE
0.03
t2
0.02
DUTY CYCLE, D = t1/t2
0.01
1.0
2.0
5.0
10
20
50
100
200
t, TIME (ms)
500
1.0 k
2.0 k
5.0 k
10 k
Figure 1. MPS8098, MPS8099, MPS8598 and MPS8599 Thermal Response
http://onsemi.com
2
20 k
50 k 100 k
(NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599*
TURN−ON TIME
VCC
−1.0 V
5.0 ms
TURN−OFF TIME
100
+40 V
100
RL
RL
OUTPUT
+10 V
Vin
0
VCC
+VBB
+40 V
tr = 3.0 ns
OUTPUT
RB
Vin
* CS t 6.0 pF
5.0 mF
RB
* CS t 6.0 pF
5.0 mF
100
100
5.0 ms
tr = 3.0 ns
*Total Shunt Capacitance of Test Jig and Connectors For PNP Test Circuits, Reverse All Voltage Polarities
Figure 2. Switching Time Test Circuits
PNP
300
300
TJ = 25°C
200
TJ = 25°C
200
5.0 V
VCE = 1.0 V
100
−5.0 V
VCE = −1.0 V
100
70
50
30
f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz)
f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz)
NPN
2.0
1.0
3.0
5.0 7.0 10
20
30
50 70 100
70
50
30
−1.0
−2.0 −3.0
−5.0 −7.0 −10
−20 −30
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 3. MPS8098/99 Current−Gain −
Bandwidth Product
Figure 4. MPS8598/99 Current−Gain −
Bandwidth Product
40
40
25°C
TTJJ==25°C
20
C, CAPACITANCE (pF)
C, CAPACITANCE (pF)
TJ = 25°C
Cibo
10
8.0
6.0
4.0
2.0
−50 −70 −100
0.2
0.5
1.0
2.0
5.0
10
Cibo
10
8.0
6.0
Cobo
4.0
Cobo
0.1
20
20
50
100
2.0
−0.1 −0.2
−0.5 −1.0 −2.0
−5.0
−10 −20
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 5. MPS8098/99 Capacitance
Figure 6. MPS8598/99 Capacitance
http://onsemi.com
3
−50 −100
(NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599*
NPN
1.0 k
700
500
VCC = 40 V
IC/IB = 10
IB1 = IB2
TJ = 25°C
300
1.0 k
700
500
ts
200
100
70
50
tf
30
10
20
30
50
70
10
100
200
tr
−20
−10
−30
−50
−70
−200
−100
IC, COLLECTOR CURRENT (mA)
Figure 7. MPS8098/99 Switching Times
Figure 8. MPS8598/99 Switching Times
1.0 k
700
500
−1.0 k
−700
−500
300
−300
−200
200
100
70
50
−100
−70
−50
CURRENT LIMIT
THERMAL LIMIT
SECOND BREAKDOWN LIMIT
30
20
MPS8098
MPS8099
DUTY CYCLE ≤ 10%
10
td @ VBE(off) = −0.5 V
IC, COLLECTOR CURRENT (mA)
I C , COLLECTOR CURRENT (mA)
I C , COLLECTOR CURRENT (mA)
tf
100
70
50
20
tr
td @ VBE(off) = 0.5 V
10
200
30
20
VCC = −40 V
IC/IB = 10
IB1 = IB2
TJ = 25°C
ts
300
t, TIME (ns)
t, TIME (ns)
PNP
1.0
2.0
3.0
5.0 7.0 10
20
30
50
−30
−20
−10
70 100
CURRENT LIMIT
THERMAL LIMIT
SECOND BREAKDOWN LIMIT
MPS8598
DUTY CYCLE ≤ 10%
MPS8599
−1.0
−2.0 −3.0
−5.0 −7.0 −10
−20 −30
−50 −70 −100
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
Figure 9. MPS8098/99 Active−Region Safe
Operating Area
Figure 10. MPS8598/99 Active−Region Safe
Operating Area
400
300
TJ = 125°C
200
25°C
200
h FE , DC CURRENT GAIN
h FE , DC CURRENT GAIN
TJ = 125°C
−55°C
100
VCE = 5.0 V
80
60
40
0.2 0.3 0.5
1.0
2.0 3.0 5.0
10
20 30
50
100 200
25°C
100
70
−55°C
VCE = −5.0 V
50
30
−0.2
−0.5
−1.0 −2.0
−5.0
−10
−20
−50 −100 −200
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 11. MPS8098/99 DC Current Gain
Figure 12. MPS8598/99 DC Current Gain
http://onsemi.com
4
(NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599*
NPN
1.0
TJ = 25°C
0.8
0.6
TJ = 25°C
0.8
VBE(sat) @ IC/IB = 10
V, VOLTAGE (VOLTS)
V, VOLTAGE (VOLTS)
PNP
1.0
VBE @ VCE = 5.0 V
0.4
0.2
VBE(sat) @ IC/IB = 10
0.6
VBE @ VCE = 5.0 V
0.4
0.2
VCE(sat) @ IC/IB = 10
VCE(sat) @ IC/IB = 10
0.5
1.0
2.0
5.0
10
20
50
100
0
0.2
200
2.0
20
50
100
IC =
20 mA
IC =
50 mA
IC =
200 mA
IC =
100 mA
1.2
0.8
IC =
10 mA
0.05
0.1
0.2
0.5
1.0
2.0
5.0
10
20
200
2.0
IC =
10 mA
1.6
IC =
50 mA
IC =
20 mA
IC =
100 mA
IC =
200 mA
1.2
0.8
0.4
TJ = 25°C
0
0.05 0.1
0.02
IB, BASE CURRENT (mA)
0.2
0.5
1.0
2.0
5.0
10
20
IB, BASE CURRENT (mA)
Figure 15. MPS8098/99 Collector Saturation Region
Figure 16. MPS8598/99 Collector Saturation Region
−1.0
−1.0
R qVB , TEMPERATURE COEFFICIENT (mV/° C)
R qVB , TEMPERATURE COEFFICIENT (mV/° C)
10
Figure 14. MPS8598/99 “ON” Voltages
1.6
−1.4
−1.4
−1.8
−1.8
RqVB FOR VBE
−55°C TO 125°C
−2.2
RqVB FOR VBE
−55°C TO 125°C
−2.2
−2.6
−2.6
−3.0
5.0
Figure 13. MPS8098/99 “ON” Voltages
TJ = 25°C
0
0.02
1.0
IC, COLLECTOR CURRENT (mA)
2.0
0.4
0.5
IC, COLLECTOR CURRENT (mA)
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
0
0.2
0.2
0.5
1.0
2.0
5.0
10
20
50
100
200
−3.0
0.2
0.5
1.0
2.0
5.0
10
20
50
100
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 17. MPS8098/99 Base−Emitter
Temperature Coefficient
Figure 18. MPS8598/99 Base−Emitter
Temperature Coefficient
http://onsemi.com
5
200
(NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599*
ORDERING INFORMATION
Device
MPS8098
MPS8098G
MPS8098RLRA
MPS8098RLRAG
MPS8099
MPS8099G
MPS8099RLRA
MPS8099RLRAG
MPS8099RLRM
MPS8099RLRMG
MPS8099RLRP
MPS8099RLRPG
MPS8598
MPS8598G
MPS8598RLRA
MPS8598RLRAG
MPS8599
MPS8599G
MPS8599RLRA
MPS8599RLRAG
MPS8599RLRM
MPS8599RLRMG
Package
Shipping †
TO−92
5,000 Units / Box
TO−92
(Pb−Free)
5,000 Units / Box
TO−92
2,000 / Tape & Reel
TO−92
(Pb−Free)
2,000 / Tape & Reel
TO−92
5,000 Units / Box
TO−92
(Pb−Free)
5,000 Units / Box
TO−92
2,000 / Tape & Reel
TO−92
(Pb−Free)
2,000 / Tape & Reel
TO−92
2,000 / Ammo Pack
TO−92
(Pb−Free)
2,000 / Ammo Pack
TO−92
2,000 / Ammo Pack
TO−92
(Pb−Free)
2,000 / Ammo Pack
TO−92
5,000 Units / Box
TO−92
(Pb−Free)
5,000 Units / Box
TO−92
2,000 / Tape & Reel
TO−92
(Pb−Free)
2,000 / Tape & Reel
TO−92
5,000 Units / Box
TO−92
(Pb−Free)
5,000 Units / Box
TO−92
2,000 / Tape & Reel
TO−92
(Pb−Free)
2,000 / Tape & Reel
TO−92
2,000 / Ammo Pack
TO−92
(Pb−Free)
2,000 / Ammo Pack
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
http://onsemi.com
6
(NPN) MPS8098, MPS8099*, (PNP) MPS8598, MPS8599*
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AL
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
B
R
P
L
SEATING
PLANE
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
K
D
X X
G
J
H
V
C
SECTION X−X
1
N
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
−−−
0.250
−−−
0.080
0.105
−−− 0.100
0.115
−−−
0.135
−−−
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
−−−
6.35
−−−
2.04
2.66
−−−
2.54
2.93
−−−
3.43
−−−
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
N
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
Literature Distribution Center for ON Semiconductor
USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Phone: 81−3−5773−3850
Email: [email protected]
http://onsemi.com
7
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
MPS8098/D
Similar pages