LLM3225-391J “#” indicates a package specification code. < List of part numbers with package codes > LLM3225-391J Shape Notes Rated current is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20℃.) OR rated current is specified when temperature of inductor the is raised 20℃ by DC current. (The ambient reference temperature is 20℃.) Whichever is smaller. References Packaging code L size 3.2 ±0.2mm W size 2.5 ±0.2mm T size 2.4 mm Size code in inch (mm) 1210 (3225) Specifications φ180mm Embossed taping Minimum quantity 2000 Mass (Typ.) 1 piece 0.04g Specifications Inductance 390µH ±5% Inductance test frequency 0.796MHz Rated current 35mA Max. of DC resistance 29.0Ω Q (min.) 20 Q test frequency 0.796MHz Self resonance frequency (min.) 4.5MHz Operating temperature range (Self-temperature rise is included) -40〜85℃ Class of magnetic shield No Shield Series LLM3225 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2017/08/07 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Q-Frequency characteristics (Typ.) 2 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2017/08/07