NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 1 of 16 AUTHORIZED BY TRX10GVP2010C1 (SFP+ SR Module) J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Product Specification 10 GBd SFP+ 850 nm Limiting Transceiver TRX10GVP2010C1 Product Features: Hot pluggable SFP+ optical transceiver Programmable input and output equalizers Data rate transparent from 9.95 to 11.3 Gbps Low power consumption, 0.55 W typ. Excellent EMI performance Transmission distance up to 300 m OM3 MMF 0 °C to +70 °C case operating temperature 850 nm VCSEL laser Duplex LC connector Laser Class 1 RoHS 6/6 compliant Applications: 10G Ethernet 10GBASE-SR/SW 10G Fibre Channel 1200-MX-SN-I FCI’s SFP+ optical transceiver TRX10GVP2010C1 is compliant with the SFP+ MSA specifications (SFF-8431 and SFF-8432) and with 10GBASE-SR/SW per IEEE 802.3 as well as 1200-MX-SN-I per 10G Fibre Channel. It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1 safety compliant per IEC/CDRH. The sub-Watt power consumption and the excellent EMI performance allow system design with high port density. Adjustable input and output equalizers allow to overcome host board high frequency signal loss and to optimize module performance in interaction with host board equalizers. Supported Standards Application Standard Data Rate 10G Ethernet LAN/WAN IEEE 802.3 10GBASE-SR/SW 10.312 / 9.953 Gbps 1200-MX-SN-I 10.518 Gbps 10G Fibre Channel PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 2 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Table of Contents Table of Contents ......................................................................................................................................... 2 Functional Description ................................................................................................................................. 3 Electrical Characteristics ............................................................................................................................. 4 Absolute Maximum Ratings ......................................................................................................................... 4 Recommended Operating Conditions.......................................................................................................... 4 Low Speed Characteristics .......................................................................................................................... 4 SFI Module Transmitter Input Characteristics.............................................................................................. 5 SFI Module Receiver Output Characteristics ............................................................................................... 5 Optical Characteristics ................................................................................................................................. 6 General Parameters .................................................................................................................................... 6 Optical Transmitter ...................................................................................................................................... 6 Optical Receiver .......................................................................................................................................... 6 Application Information................................................................................................................................ 7 Connector Pinout......................................................................................................................................... 7 Electrical Pin Definition ................................................................................................................................ 7 Application Schematics ............................................................................................................................... 8 Interfacing the Transceiver .......................................................................................................................... 9 Digital Optical Monitoring ............................................................................................................................ 9 Tx Input & Rx Output Equalizer Adjustment .............................................................................................. 10 Programmability Feature Code .................................................................................................................. 11 Passcode Entry and Modification .............................................................................................................. 11 Module Outline .......................................................................................................................................... 12 Module Safety & Compliance ..................................................................................................................... 13 ESD & Electromagnetic Compatibility....................................................................................................... 13 Eye Safety ................................................................................................................................................... 14 Ordering Information .................................................................................................................................. 15 PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 3 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Functional Description The transmit path is based on an AC coupled 100 ohm differentially terminated driver coupled to an 850 nm VCSEL. Laser output may be disabled by pulling the transmitter disable (TX_DIS) line high which is its default state when leaving the input floating due to an internal pull-up resistor. A fault condition is raised upon detection of an abnormal laser state. The receive path consists of a receiver optical sub-assembly (ROSA) for optical to electrical conversion, followed by a limiting amplifier boosting the electrical signal. A loss of signal (LOS) status line provides information to facilitate easy link detection. Complete digital optical monitoring is implemented in compliance to SFF-8472 and made accessible via the 2-wire interface providing real time information about all important module parameters and status information. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 4 of 16 B AUTHORIZED BY TRX10GVP2010C1 (SFP+ SR Module) DATE J. Blank 29 July 2011 CLASSIFICATION UNRESTRICTED Electrical Characteristics Absolute Maximum Ratings Rating Conditions Storage Ambient Temperature Powered Case Temperature Operating Relative Humidity Supply Voltage Range Non condensing Symbol Min Max Units ϑstg ϑc RH VCCT/R -40 0 0 -0.5 +85 +75 95 4.0 °C °C % V Any stress beyond the maximum ratings may result in permanent damage to the device. Specifications are guaranteed only under recommended operating conditions. Recommended Operating Conditions Parameter Conditions Symbol Min Operating Case Temperature ϑCase 0 Power Supply Voltage VCCT/R 3.135 SFI Signals VCM -0.5 Conditions Symbol Min DC Common Mode Voltage Typ Max Units +70 °C 3.30 3.465 V 4.0 V Max Units Low Speed Characteristics Parameter Typ Supply Current Transmitter @ VCCT IVCCTX 100 mA Supply Current Receiver @ VCCR IVCCRX 120 mA 0.75 W 0.4 Host_ Vcc + 0.3 0.8 VccT + 0.5 VccT * 0.3 VccT + 0.5 0.4 Host_ Vcc + 0.3 V Power Consumption 0.55 VOL TX_Fault, RX_LOS Host Vcc Range 2 V – 3.47 V, IOL_max = 4 mA TX_Dis, RS0, RS1 Low Voltage TTL SCL, SDA Host Vcc Range 3.13 V – 3.47 V, IOL_max = 4 mA VIL 0 Host_ Vcc – 0.5 -0.3 VIH 2.0 VIL -0.3 VOH VIH VOL VOH VccT * 0.7 0.0 Host_ Vcc – 0.5 PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 5 of 16 B AUTHORIZED BY TRX10GVP2010C1 (SFP+ SR Module) DATE J. Blank 29 July 2011 CLASSIFICATION UNRESTRICTED SFI Module Transmitter Input Characteristics Parameter Nominal Data Rate Reference Differential Input Impedance Input AC Common Mode Input Voltage Differential Input Voltage Swing Conditions Min Zd 2 x |V(TD+) – V(TD-)| 0.01 – 4.1 GHz Differential Input S-parameter 4.1 – 11.1 GHz Differential to Common Mode Conversion 3) Total Jitter 0.01 – 11.1 GHz Data Dependent Jitter Uncorrelated Jitter 1) 2) 3) Symbol VID Typ 10.3125 Max Units Gbd Ω 100 0 25 150 900 mV (RMS) mV 1 SDD11 dB 2 ) dB SCD11 -10 dB ) TJ 0.28 UI(p-p) DDJ 0.1 UI(p-p) UJ 0.023 RMS Max Units Reflection coefficient given by equation SDD11(dB) < -12 + 2 x SQRT(f), with f in GHz. Reflection coefficient given by equation SDD11(dB) < -6.3 + 13 x Log10(f/5.5), with f in GHz. Common mode reference impedance is 25Ω. SFI Module Receiver Output Characteristics Parameter Conditions Nominal Data Rate Reference Differential Output Impedance Termination Mismatch Symbol Min Zd Typ 10.3125 Gbd 100 Ω ∆Zd 5 Output AC Common Mode Voltage 7.5 RLoad = 100 ohm, 2 x |V(RD+) – V(RD-)| 20 % to 80 % Differential Output Amplitude Output Rise and Fall Time 0.01 – 4.1 GHz Differential Output S-parameter 4.1 – 11.1 GHz 4 Common Mode Output Return Loss ) 0.01 – 2.5 GHz 2.5 – 11.1 GHz Deterministic Jitter Total Jitter 1) 2) 3) 4) See SFP+ MSA VOSPP 350 tR, tF 28 520 800 % mV (RMS) mV ps 1 dB 2 dB 3 SCC22 ) -3 dB dB DJ 0.42 UI(p-p) TJ 0.7 UI(p-p) SDD22 ) ) Reflection coefficient given by equation SDD22(dB) < -12 + 2 x SQRT(f), with f in GHz. Reflection coefficient given by equation SDD22(dB) < -6.3 + 13 x Log10(f/5.5), with f in GHz. Reflection coefficient given by equation SCC22(dB) = -7 + 1.6 x f, with f in GHz Common mode reference impedance is 25Ω. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 6 of 16 B AUTHORIZED BY TRX10GVP2010C1 (SFP+ SR Module) DATE J. Blank 29 July 2011 CLASSIFICATION UNRESTRICTED Optical Characteristics General Parameters Parameter Operating Range Conditions 62.5 µm MMF 50 µm MMF 62.5 µm MMF 50 µm MMF 50 µm MMF Min Modal Bandwidth Symbol (MHz*km) 160 400 200 lOP 500 2000 Min Typical 1GBd Typical 10GBd Units 2 2 0.5 0.5 0.5 220 500 275 550 X 26 66 33 82 300 m Optical Transmitter Symbol Min Typ Max Units Center Wavelength Parameter Conditions λTRP 840 850 860 nm RMS Spectral Width nm Average Launch Power ∆λ Pavg 0.45 Optical Modulation Amplitude Extinction Ratio Relative Intensity Noise POMA ER RIN -2.9 3.5 Symbol Min λC PMAX 840 -1 -7.3 -1 dBm -128 dBm dB dB/Hz Typ Max Units 850 860 nm dBm Optical Receiver Parameter Conditions Center Wavelength Maximum Average Input Power Receiver Sensitivity PRBS 231-1, BER < 1*10-12 @10.3125GBd PIN(OMA) -15 -12 dBm Stressed Receiver Sensitivity PRBS 231-1, BER < 1*10-12 @ 10.3125GBd PIN(OMA) -11 -8 dBm Loss of Signal Loss of Signal Hysteresis Assert Pavg_as De-Assert POMA_deas Hyst -30 -19 -17 1 -13 dBm dB Note: The specified characteristics are met within the recommended range of operating. Unless otherwise noted, typical data are quoted at nominal voltages and +25°C ambient temperature. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 7 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Application Information Connector Pinout Electrical Pin Definition PIN Logic Symbol 2 LVTTL-O TX_Fault 3 4 LVTTL-I LVTTL-I/O TX_Dis SDA 5 LVTTL-I SCL 1 VeeT 6 MOD_ABS Name / Description Module Transmitter Ground Transmitter Disable; Turns off transmitter laser output 2-Wire Serial Interface Data Line 2 2-Wire Serial Interface Clock 2 (=MOD_DEF0) Module Absent, shorted to module ground LVTTL-I LVTTL-O RS0 RX_LOS 9 LVTTL-I RS1 Transmitter Rate Select VeeR VeeR Module Receiver Ground Module Receiver Ground 12 CML-O RD- 13 14 CML-O RD+ VeeR 1 Module Transmitter Fault 7 8 10 11 Note Receiver Rate Select Receiver Loss of Signal Indication Active LOW 1 1 Receiver Inverted Data Output Receiver Data Output Module Receiver Ground 15 VccR Module Receiver 3.3 V Supply 16 17 VccT VeeT Module Transmitter 3.3 V Supply Module Transmitter Ground 18 CML-I TD+ Transmitter Non-Inverted Data Input 19 20 CML-I TDVeeT Transmitter Inverted Data Input Module Transmitter Ground 1 1 1 1. Module ground pins Vee are isolated from the module case. 2. Shall be pulled up with 1k-10k ohms to a voltage between 3.13 V and 3.47 V on the host board. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 8 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Application Schematics Recommended electrical connections to transceiver are shown below. Pull-ups: 1k – 10k ohms. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 9 of 16 AUTHORIZED BY TRX10GVP2010C1 (SFP+ SR Module) J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Interfacing the Transceiver Communication is done by a serial 2-wire interface compatible to the I2C bus protocol. Refer to SFF-8472 for a more detailed explanation of the registers: Base Address A2h Base Address A0h Register 96 - 127 Content Serial Transceiver ID as defined in SFP MSA FCI Specific 128 - 255 Reserved 0 - 95 Register 0 - 55 56 - 95 96 – 119 120(LSB) – 123(MSB) 124(LSB) – 127(MSB) Content Alarm & Warnings Thresholds & Limits External calibration constants (not used) Values from real time diagnostic monitoring Passcode change field Passcode entry field 249 - 253 Customer specific, writable area Input & output equalizer settings Reserved 254 Feature code 255 Reserved 128 – 247 248 Digital Optical Monitoring The transceiver offers the ability to monitor important module parameter during operation. All five parameters listed below are continuously monitored for getting information about the current module status. All data is calibrated internally; there is no need for external post processing. Temperature Internally measured temperature data is represented as two’s complement of a signed 16-bit value in increments of 1/256 °C over a range of -40 to +100 °C. Accuracy is better than +/-3 °C. Supply Voltage (VCC) Internally measured supply voltage. Represented as a 16-bit unsigned integer with the voltage defined as the full 16 bit value (0 – 65535) with LSB equal to 100 µVolt, which yields to a total range of 0 to +6.55 Volts. Accuracy is better than +/-3 %. Laser Bias Current The VCSEL bias current is represented as a 16 bit unsigned integer with the current defined as the full 16-bit value (0 – 65535) with LSB equal to 2 µA. Accuracy is better than +/-10 %. Optical Transmitter Power TX output power measurement is based on internal monitor diode feedback. Represented as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 – 65535) with LSB equal to 0.1 µW. Accuracy is better than +/-3 dB over a range of Pavgmin to Pavgmax. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 10 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY B DATE J. Blank 29 July 2011 CLASSIFICATION UNRESTRICTED Receiver Optical Power RX input power measurement is based on photodiode average current. Represented as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 – 65535) with LSB equal to 0.1 µW. Accuracy is better than +/-3 dB over a range of -12 dBm to -1 dBm. Note: The specified characteristics are met within the recommended range of operating conditions regarding temperature and voltage. Tx Input & Rx Output Equalizer Adjustment The transceiver is equipped with equalizers at the transmitter input and at the receiver output (at the electrical module interface) to compensate for high frequency signal loss on the host board printed circuit board (Host-PCB) into which the transceiver is plugged and to allow performance optimization in interaction with host board equalizers (if there are any). There are different module equalizer settings available to adjust the strength of the equalization which may be selected according to the line length of Host-PCB signal tracks. MSB reserved Tx2 Tx1 Content of Register 248 in Table A2h Tx0 reserved Rx2 Rx1 LSB Rx0 Register 248 is always readable, but only writable if a valid passcode has been written to registers 124 – 127 of table A2h before (see paragraph Passcode Entry and Modification below). Reserved bits of register 248 should be written to 0. After power up, the module always comes up with its factory programmed default equalizer settings. Transmitter Input Signal Equalizer Settings: Tx2 0 1 1 1 1 Tx1 X 0 0 1 1 Tx0 X 0 1 0 1 Description Input equalizer off Low equalization Reserved Default equalization (factory setting) Reserved X: don’t care Receiver Output Signal Equalizer (Peaking) Settings: Rx2 0 0 … 1 Rx1 0 0 Rx0 0 1 1 1 Description Output peaking off Lowest peaking Increased peaking between 001 up to 111 Strongest peaking Factory setting (default) will be 0 or 1. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 11 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Programmability Feature Code Register 254 of table A2h indicates the programmability features available and an implementation code to distinguish different implementations. This is a read only register. MSB Tx Equal. Rx Equal. Content of Register 254 in Table A2h reserved reserved reserved I-Code2 I-Code1 LSB I-Code0 Tx Equal.: is set to 1 if the transceiver supports programming of the Tx equalizer. Rx Equal.: is set to 1 if the transceiver supports programming of the Rx equalizer. I-Code2…0: implementation code. Passcode Entry and Modification Write-access to the transceiver programmability features and to the customer specific writable area (128 – 247 of table A2h) is granted via a valid passcode which has to be written to the passcode entry field (registers 124-127 of table A2h). Please contact FCI for the factory preset initial passcode. The passcode may be changed to a proprietary one by entering the new one into the passcode change field (registers 120123 of table A2h) after a valid passcode has been written to the passcode entry field. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 12 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Module Outline All dimensions shown are in millimeters. PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 13 of 16 B AUTHORIZED BY TRX10GVP2010C1 (SFP+ SR Module) DATE J. Blank 29 July 2011 CLASSIFICATION UNRESTRICTED Module Safety & Compliance FCI’s SFP+ SR module is designed to meet international standards and requirements. The module is RoHS compliant according to the European Parliament requirements on the restriction of the use of hazardous substances in electrical and electronic equipment (RoHS). The module optical output power meets Class 1 requirements for laser safety. Requirements Standard IEC 60950-1:2001 EN 60950-1:2001 Module Safety RoHS Compliance Laser Safety (Class 1) RoHS 6/6 Directive 2002/95/EC Amendment 4054 (2005/747/EC) CDRH 21 CFR 1040.10 and 1040.11 (according FDA) IEC 60825-1 Rev2 2007 (according IEC) ESD & Electromagnetic Compatibility Requirements EMI (Emission) EMI (Immunity) ESD (Electrical connector) ESD (Module case) ESD (Module case) Standard FCC Part 15 B EN 55022 Class B CISPR 22 30 MHz … 40 GHz IEC 61000-4-3, 10 MHz … 1 GHz EIA/JESD22-A114-B MIL-STD 883C Method 3015.7 Air Discharge EN61000-4-2, Criterion B Contact Discharge EN61000-4-2, Criterion B Value At least 6 dB margin to Class B limit No bit errors at sensitivity limit ≥ 2 kV ≥ 1 kV (SFI signals) ≥ 15 kV ≥ 8 kV PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 14 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Eye Safety This laser based multimode transceiver is a Class 1 product. It complies with IEC 60825-1 Edition 2 and FDA performance standards for laser products (21 CFR 1040.10 and 1040.11) except for deviations pursuant to Laser Notice 50, dated July 26, 2001. CLASS 1 LASER PRODUCT To meet laser safety requirements the transceiver shall be operated within the Absolute Maximum Ratings. Note: All adjustments have been made at the factory prior to shipment of the devices. No maintenance or alteration to the device is required. Tampering with or modifying the performance of the device will result in voided product warranty. Failure to adhere to the above restrictions could result in a modification that is considered an act of “manufacturing”, and will require, under law, recertification of the modified product with the U.S. Food and Drug Administration (ref. 21 CFR 1040.10 (i)). Rx Product Top View Tx Laser Emission Wavelength >840 nm Accessible Emission Limit (as defined by IEC: 7 mm aperture at 70 mm distance) <743 µW PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 15 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED Ordering Information Application Standard 10G Ethernet LAN/WAN IEEE 802.3 10GBASE-SR/SW TRX10GVP2010C1 10GFC 1200-MX-SN-I TRX10GVP2010C1 10G Fibre Channel Part Number PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission. NUMBER TYPE GS-12-0903 Product Specification TITLE PAGE REVISION 16 of 16 TRX10GVP2010C1 (SFP+ SR Module) AUTHORIZED BY J. Blank B DATE 29 July 2011 CLASSIFICATION UNRESTRICTED REVISION RECORD Rev A B Page Description Initial version. Changed formatting, content. EC# ECN-ELX-V004446-1 Date 2 Mar. 2011 29 Jul. 2011 PDS: RevCopyright :B © 2011 FCI Deutschland GmbH. FCI Deutschland STATUS:Released Printed: 2012 GmbH reserves the right to make changes to this document at any timeApr without05, notice. Information in this document is believed to be reliable. However, no responsibility is assumed for possible inaccuracy or omission.