JDS NEM-C285 Network expansion module Datasheet

COMMUNICATIONS COMPONENTS
Network Expansion Module
Key Features
• 1x3 to 2x16 as standard
• Fused fiber and planar technology
• Low excess loss and PDL
• Single and dual window operation
• High and standard grades
• Custom configurations available
Applications
• Passive optical networks
• Secure data networks
• CATV
• Scientific equipment
The JDSU network expansion module enables the splitting of optical signals in
singlemode optical fiber. The standard product comprises one or two input ports
and between three and 16 output ports. Designed for optical networking
applications, the module uses advanced fused fiber and planar technology to yield
ultra-low excess loss and low polarization dependent loss (PDL) in a compact package.
Standard wavelength ranges are 1310, 1550, 1585 nm and 1310/1550 nm. A wide
variety of housings, including an injection-moulded fiber organizer, 19” rack, and
LGX cassette are available and most connector types can be fitted.
Two grades of performance are provided: Grade P modules offer the solution to
demanding power and PDL budgets through the use of the highest specification
couplers. Grade A modules offer a cost-effective answer to standard splitter
requirements, including CATV and access networks.
In addition to the standard products shown, a wide variety of custom
configurations are available for specialized applications. These include alternative
housings, wavelengths, and high port counts over 16.
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
NETWORK EXPANSION MODULE
2
1x8 Network Expansion Module
Wavelength Dependence
10.5
I n s e r ti o n L o s s ( d B )
10.0
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 8
9.5
9.0
8.5
8.0
1520
1525
1530
1535
1540
1545
1550
1555
1560
Wavelength (nm)
Specifications
Parameter
Network Expansion Module
Operating wavelength
Single window (1310 ±20, 1550 ±20 or 1585 ±20)
Dual window (1310 ±20 and 1550 ±20)
Port configuration1
1x3 1x4 1x5 1x6 1x8 1x10 1x12 1x16
1x3 1x4 1x5 1x6 1x8 1x10 1x12 1x16
Max. insertion loss2
P Grade
5.2 6.4 7.5 8.4 9.7 10.8 11.7 12.9
5.3 6.8 7.9 8.8 10.3 11.4 12.2 13.7
A Grade
5.3 6.6 7.8 8.6 9.9 11.1 11.9 13.3
5.5 7.1 8.3 9.1 10.7 12.0 12.8 14.4
Uniformity3
P Grade
0.60 0.65 0.85 1.00 1.05 1.25 1.40 1.45
0.90 1.25 1.50 1.60 1.95 2.20 2.30 2.65
A Grade
0.85 0.95 1.25 1.40 1.50 1.75 1.95 2.05
1.20 1.70 2.10 2.20 2.70 3.10 3.20 3.70
Polarization dependent loss4
P Grade
0.10 0.14 0.14 0.15 0.16 0.17 0.19 0.19
0.12 0.14 0.16 0.16 0.17 0.19 0.20 0.20
A Grade
0.12 0.17 0.18 0.18 0.20 0.21 0.23 0.23
0.13 0.17 0.21 0.23 0.23 0.25 0.28 0.28
Polarization mode dispersion
<0.1
Directivity/Return loss5
>55
Fiber
Corning SMF-28
Operating temperature6
-40 to 75
Storage temperature
-40 to 85
1. For 1xM, read 1xM: 2xM
2. Excludes connector loss, PDL and TDL.
3. Difference between maximum and minimum insertion loss at constant temperature over all paths and all wavelengths, not including PDL.
4. Typical; at band center wavelength.
5. Excluding connector return loss.
6. For connectorized module, operating temperature range is -5 to 75 °C.
Unit
nm
dB
dB
dB
dB
dB
dB
ps/nm
dB
°C
°C
NETWORK EXPANSION MODULE
3
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
[email protected].
Sample: NEM-C1843A111 (Network Expansion Module, 1550±20 nm, 1 x 8, 150 x 95 x 10 mm housing, 900 µm loose-tube
pigtail, Grade A, Corning SMF-28 fiber, 1 m pigtail, FC/PC connectors)
NEMCode
4
C
L
A
Wavelength
1310±20 nm
1550±20 nm
1585±20 nm
1310/1550±20 nm
Code
1
2
Number of Input Ports
1 input port
2 input ports
Code
3
4
5
6
8
A
C
G
Number of Output Ports
3 output ports
4 output ports
5 output ports
6 output ports
8 output ports
10 output ports
12 output ports
16 output ports
Code
4
5
6
Housing
150x95x10 mm 1
19" rack
LGX cassette
Code
0
1
2
3
Pigtail Type
Bulkhead connector2
250 µm primary-coat
900 µm loose-tube
3 mm fan-out sleeve
Code
A
P
Grade
Grade A
Grade P
Code
1
Fiber Type
Corning SMF-28
Code
0
1
2
Pigtail Length3
Bulkhead connector2
1m
2m
Code
0
1
3
5
9
A
B
Connectors
None
FC/PC
FC/APC
SC/APC
FC/UPC
SC/UPC
LC4
Note:
1. Injection moulded plastic fiber organizer.
2. 19" rack and LGX cassettes are fitted with bulkhead connectors.
3. Minimum pigtail length. Other pigtail lengths are available on request. Where connectorized, pigtail length is to connector end face.
4. Not available for pigtail type 3 (3 mm fan-out sleeving).
SMF-28 is a registered trademark of Corning Incorporated.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2005 JDS Uniphase
Corporation. All rights reserved. 10143105 Rev. 001 12/05 NEM.DS.CC.AE
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
Similar pages