EGP20A - EGP20K 2.0 A Glass-Passivated High-Efficiency Rectifiers Features • Glass-Passivated Cavity-Free Junction • High Surge Current Capability • Low Leakage Current • Super-Fast Recovery Time for High Efficiency • Low Forward Voltage, High Current Capability DO-15 Glass case COLOR BAND DENOTES CATHODE Absolute Maximum Ratings(1) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Value Units IF(AV) Average Rectified Current .375 inch lead length at TA = 55°C Parameter 2.0 A IFSM Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) 75 A -65 to 150 °C TJ, TSTG Junction and Storage Temperature Range Note: 1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Total Device Dissipation 3.13 W Derate above 25°C 25 mW°C RθJA Thermal Resistance, Junction to Ambient 40 °C/W RθJL Thermal Resistance, Junction to Lead 15 °C/W PD © 2007 Fairchild Semiconductor Corporation EGP20A - EGP20K Rev. 1.1.0 www.fairchildsemi.com 1 EGP20A - EGP20K — 2.0 A Glass-Passivated High-Efficiency Rectifiers June 2013 TA = 25°C unless otherwise noted. Parameter Device Units 20A 20B 20C 20D 20F 20G 20J 20K Peak Repetitive Reverse Voltage 50 100 150 200 300 400 600 800 V Maximum RMS Voltage 35 70 105 140 210 280 420 560 V DC Reverse Voltage (Rated VR) 50 100 150 200 300 400 600 800 V TA = 25°C Maximum Reverse Current at Rated VR TA = 125°C Maximum Reverse-Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Maximum Forward Voltage at 2.0 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 5.0 μA 100 μA 50 0.95 1.25 70 45 75 ns 1.70 V pF Note: 2. Pulse test: pulse width ≤ 300 μs, duty cycle ≤ 2%. © 2007 Fairchild Semiconductor Corporation EGP20A - EGP20K Rev. 1.1.0 www.fairchildsemi.com 2 EGP20A - EGP20K — 2.0 A Glass-Passivated High-Efficiency Rectifiers Electrical Characteristics(2) Figure 1. Forward Current Derating Curve Figure 2. Non-Repetitive Surge Current Figure 3. Forward Characteristics Figure 4. Reserve Characteristics Figure 5. Junction Capacitance © 2007 Fairchild Semiconductor Corporation EGP20A - EGP20K Rev. 1.1.0 www.fairchildsemi.com 3 EGP20A - EGP20K — 2.0 A Glass-Passivated High-Efficiency Rectifiers Typical Performance Characteristics EGP20A - EGP20K — 2.0 A Glass-Passivated High-Efficiency Rectifiers Reverse Recovery Time Characteristic and Test Circuit Diagram 3. 4. © 2007 Fairchild Semiconductor Corporation EGP20A - EGP20K Rev. 1.1.0 www.fairchildsemi.com 4 EGP20A - EGP20K — 2.0 A Glass-Passivated High-Efficiency Rectifiers Physical Dimensions DO-15 25.40 MIN (2X) 7.60 5.80 0.90 0.70 3.60 2.60 NOTES: UNLESS OTHERWISE SPECIFIED A) PACKAGE STANDARD REFERENCE: JEDEC DO-204 VARIATION AC. B) PLASTIC PACKAGE BODY. D) ALL DIMENSIONS ARE IN MILLIMETERS. E) DRAWING FILE NAME: DO15AREV1 Figure 6. AXIAL LEADED, JEDEC DO204, VARIATION (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/packaging/tr/do15_tr.pdf. © 2007 Fairchild Semiconductor Corporation EGP20A - EGP20K Rev. 1.1.0 www.fairchildsemi.com 5 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. FPS¥ F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ mWSaver¥ OptoHiT¥ OPTOLOGIC® OPTOPLANAR® 2Cool¥ AccuPower¥ AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ ® Fairchild® Fairchild Semiconductor® FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ Sync-Lock™ ® PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ ®* TinyBoost¥ TinyBuck¥ TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* PSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I64 © Fairchild Semiconductor Corporation www.fairchildsemi.com