Online data sheet IMC12-04BPPVC0SA70 IMC INDUCTIVE PROXIMITY SENSORS IMC12-04BPPVC0SA70 | IMC INDUCTIVE PROXIMITY SENSORS A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. IMC12-04BPPVC0SA70 1079287 Other models and accessories www.sick.com/IMC Illustration may differ Detailed technical data Features Housing Cylindrical thread design Thread size M12 1 Diameter Ø 12 mm Sensing range Sn 0 mm ... 4 mm 1) Safe sensing range Sa 3.24 mm Number of switching points Up to 4 adjustable switching points or windows Switching modes Single point, Window mode, Two point mode, Optical adjustment indicator Switching frequency Qint.1 / Qint.2 on Pin2 1,000 Hz Installation type Flush Connection type Male connector M12, 4-pin 2) Switching output PNP Output Q/C Switching output or IO-Link mode Output MFC Switching output or input Output function NC / NO Output characteristic Programmable Electrical wiring DC 4-wire Enclosure rating IP68 3) IP69K 4) Special features Smart TaskResistant against coolant lubricants Diagnosis Chip temperature 1) 2) 3) 4) 2 Adjustable. With gold plated contact pins. According to EN 60529. According to ISO 20653:2013-03. PROXIMITY SENSORS | SICK Online data sheet | 2018-06-12 14:57:18 Subject to change without notice IMC12-04BPPVC0SA70 | IMC INDUCTIVE PROXIMITY SENSORS Pin 2 configuration 1) 2) 3) 4) External input, Teach-in, switching signal Adjustable. With gold plated contact pins. According to EN 60529. According to ISO 20653:2013-03. Communication interface Communication interface IO-Link V1.1 Mode COM2 (38,4 kBaud) Cycle time 5 ms Process data length 32 Bit Process data structure Bit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 = switching signal QInt3 Bit 3 = switching signal QInt4 Bit 18 ... 31 = time value Factory setting Switching Point 1: reference value 1 Output: normally open Pin 2 configuration: input Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 10 % Voltage drop ≤ 2 V 2) Current consumption ≤ 35 mA 3) Hysteresis Programmable 4) Reproducibility ≤ 5 % 5) 6) Temperature drift (of Sr) ± 10 % EMC According to EN 60947-5-2 Continuous current Ia ≤ 200 mA 7) Short-circuit protection ✔ Reverse polarity protection ✔ Power-up pulse protection ✔ Shock and vibration resistance 100 g / 2 ms / 500 cycles; 150 g / 1 Mio cycles; 10 Hz ... 55 Hz / 1 mm; 55 Hz ... 500 Hz / 60 g Ambient operating temperature –40 °C ... +75 °C Housing material Stainless steel, V2A (1.4305) Sensing face material Plastic, LCP Housing length 65 mm 1) 2) 3) 4) 5) 6) 7) 8) IO-Link mode: 18 VDC ... 30 VDC. At Ia max. Without load. To comply with EN 60947-5-2, a hysteresis of approx. 10% must be set. Ub and Ta constant. Of Sr. 200 mA total for both switching outputs. Valid if toothed side of nut is used. 2018-06-12 14:57:18 | Online data sheet Subject to change without notice PROXIMITY SENSORS | SICK 3 IMC12-04BPPVC0SA70 | IMC INDUCTIVE PROXIMITY SENSORS A B C D E F Thread length 48 mm Tightening torque, max. Typ. 32 Nm 8) UL File No. E181493 Teach-in accuracy +/- 3% of Sr Resolution, typical (range) 10 μm (0 mm ... 1 mm) 20 μm (1 mm ... 3 mm) 40 μm (3 mm ... 4 mm) Resolution, maximum (area) 20 μm (0 mm ... 1 mm) 40 μm (1 mm ... 3 mm) 75 μm (3 mm ... 4 mm) 1) 2) 3) 4) 5) 6) 7) 8) H I J K L M N O P Q R S T IO-Link mode: 18 VDC ... 30 VDC. At Ia max. Without load. To comply with EN 60947-5-2, a hysteresis of approx. 10% must be set. Ub and Ta constant. Of Sr. 200 mA total for both switching outputs. Valid if toothed side of nut is used. Reference values Note Reference value in Digits for switching point in mm stored in the sensor Reference value 1 4 mm Reference value 2 3 mm Reference value 3 2 mm Reference value 4 1 mm Reduction factors Stainless steel (V2A, 304) Approx. 0.7 Aluminum (Al) Approx. 0.4 Copper (Cu) Approx. 0.3 Brass (Br) Approx. 0.4 Installation note Remark Associated graphic see "Installation" B 12 mm C 12 mm D 12 mm F 32 mm Classifications ECl@ss 5.0 27270101 ECl@ss 5.1.4 27270101 ECl@ss 6.0 27270101 ECl@ss 6.2 27270101 ECl@ss 7.0 27270101 ECl@ss 8.0 27270101 ECl@ss 8.1 27270101 ECl@ss 9.0 27270101 4 PROXIMITY SENSORS | SICK Online data sheet | 2018-06-12 14:57:18 Subject to change without notice IMC12-04BPPVC0SA70 | IMC INDUCTIVE PROXIMITY SENSORS ETIM 5.0 EC002714 ETIM 6.0 EC002714 UNSPSC 16.0901 39122230 Smart Task Smart Task name Time measurement + debouncing Logic function Window Direct Timer function Deactivated On delay Off delay ON and OFF delay Impulse (one shot) Inverter Adjustable Time measurement accuracy SIO Logic: (-1,2 ... 0) x time base ± 1 % of time measurement value 1) IOL: (-1,2 ... 0) x time base ± 1 % of time measurement value 2) Time measurement accuracy (e.g. accuracy for time measurement value = 1 s ) Time base 1 ms: –11,2 ms ... 10 ms Resolution time measuring value 1 ms Min. Time between two process events (switches) SIO Logic: 0.5 ms 1) Debounce time max. SIO Logic: 30 s 1) IOL: 0.5 ms 2) IOL: 30 s 2) Switching signal QL1 Output type (dependant on the adjusted threshold) Switching signal QL2 Output type (dependant on the adjusted threshold) Measuring value Time measurement value 1) 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used. IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters. Installation note Flush installation F B C D 2018-06-12 14:57:18 | Online data sheet Subject to change without notice PROXIMITY SENSORS | SICK 5 IMC12-04BPPVC0SA70 | IMC INDUCTIVE PROXIMITY SENSORS A B C D E F Connection diagram cd-367 1 BN + (L+) 4 Q /C L1 WH 2 MF BU 3 – (M) BK Characteristic curve Flush installation Distance in mm (inch) 8 (0.31) 4 (0.16) 4 (0.16) 8 (0.31) 0 1 2 3 4 (0.04) (0.08) (0.12) (0.16) Sn in mm (inch) Dimensional drawing (Dimensions in mm (inch)) IMC12 Standard, connector, M12, flush 65 (2.56) 48 (1.89) 8.9 (0.35) M12x1 H I J K L M N O P Q R S T 0 6 PROXIMITY SENSORS | SICK Online data sheet | 2018-06-12 14:57:18 Subject to change without notice IMC12-04BPPVC0SA70 | IMC INDUCTIVE PROXIMITY SENSORS Recommended accessories Other models and accessories www.sick.com/IMC Brief description Type Part no. Plate N05N for universal clamp bracket, M12, Stainless steel 1.4571 (sheet), Stainless steel 1.4408 (clamp), Universal clamp (5322626), mounting hardware BEF-KHS-N05N 2051621 Plate N11N for universal clamp bracket, Stainless steel 1.4571 (sheet), Stainless steel 1.4408 (clamp), Universal clamp (5322626), mounting hardware BEF-KHS-N11N 2071081 Mounting plate for M12 sensors, stainless steel, without mounting hardware BEF-WG-M12N 5320950 Mounting bracket for M12 housing, stainless steel, without mounting hardware BEF-WN-M12N 5320949 IOLA2US-01101 (SiLink2 Master) 1061790 EtherCAT IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12 cable IOLG2EC-03208R01 (IO-Link Master) 6053254 EtherNet/IP IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12-cable IOLG2EI-03208R01 (IO-Link Master) 6053255 PROFINET IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12 cable IOLG2PN-03208R01 (IO-Link Master) 6053253 Head A: female connector, M12, 4-pin, straight Head B: Flying leads Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-G02MRN 6058291 Head A: female connector, M12, 4-pin, straight Head B: Flying leads Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-G05MRN 6058476 Head A: female connector, M12, 4-pin, angled with LED Head B: Flying leads Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-L02MRN 6058482 Universal bar clamp systems Mounting brackets and plates Modules and gateways IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A Plug connectors and cables 2018-06-12 14:57:18 | Online data sheet Subject to change without notice PROXIMITY SENSORS | SICK 7 IMC12-04BPPVC0SA70 | IMC INDUCTIVE PROXIMITY SENSORS A B C D E F H I J K L M N O P Q R S T Brief description 8 Type Part no. Head A: female connector, M12, 4-pin, angled with LED Head B: Flying leads Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-L05MRN 6058483 Head A: female connector, M12, 4-pin, angled Head B: Flying leads Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-W02MRN 6058474 Head A: female connector, M12, 4-pin, angled Head B: Flying leads Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-W05MRN 6058477 Head A: female connector, M12, 4-pin, angled Head B: male connector, M12, 4-pin, straight Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DSL-1204-B02MRN 6058502 Head A: female connector, M12, 4-pin, angled Head B: male connector, M12, 4-pin, straight Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DSL-1204-B05MRN 6058503 Head A: female connector, M12, 4-pin, straight Head B: male connector, M12, 4-pin, straight Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DSL-1204-G02MRN 6058499 Head A: female connector, M12, 4-pin, straight Head B: male connector, M12, 4-pin, straight Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DSL-1204-G05MRN 6058500 PROXIMITY SENSORS | SICK Online data sheet | 2018-06-12 14:57:18 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com