Specification For Approval 纽航电子有限公司 Niu Hang Electronic Co. Ltd 产品规格承认书 客户名称 三立电子（东莞）有限公司 CUSTOMER: 客户料号 WARE PN: 产品名称 桥式整流器 ／ＢＲＩＤＧＥ ＲＥＣＴＩＦＩＥＲＳ PRODUCT NAME: 型号规格 ＧＢＰ２１０ ２Ａ／１０００Ｖ ＧＢＰ MODEL DETAIL: 供应商 东莞市纽航电子有限公司 SUPPLIER: 制作／ＭＡＫＥ ＢＹ 江小芬 审核／ＣＨＥＣＫＥＤ ＢＹ 批准／ＡＰＰＲＯＶＥ ＢＹ 邱 李 和平 小阳 ． ． 送样日期／ＤＡＴＥ ２０１７年５月２２日 客户承认／ＣＵＳＴＯＭＥＲ ＡＰＰＲＯＶＥ ＢＹ 承认／ＴＥＳＴＥＤ ＢＹ 审核／ＣＨＥＣＫＥＤ ＢＹ 地址：广东省东莞市莞城东城南路东升大厦７楼 Ａｄｒｅｓｓ：Ｄｏｎｇｓｈｅｎｇ ｂｕｉｌｄｉｎｇ Ｆ７，Ｄｏｎｇｃｈｅｎｇ Ｓｏｕｔｈ Ｒｏａｄ Ｇｕａｎｃｈｅｎｇ Ｄｉｓｔｒｉｃｔ，Ｄｏｎｇｇｕａｎ，Ｇｕａｎｇｄｏｎｇ，Ｐ．Ｒ．Ｃｈｉｎａ． 邮编／Ｐｏｓｔ Ｃｏｄｅ：５２３０００ 批准／ＡＰＰＲＯＶＥ ＢＹ 承认日期／ＤＡＴＥ 电话／Ｔｅｌ．：＋８６－７６９－２２５０９９５９／＋８６－７６９－２２５０９８５９ 传真／Ｆａｘ．：＋８６－７６９－２６２６５１５０ 邮件／Ｅ－ｍａｉｌ：ｎｉｕｈａｎｇ＠ｄｇｎｉｕｈａｎｇ．ｃｏｍ 网址／Ｗｅｂｓｉｔｅ：ｗｗｗ．ｄｇｎｉｕｈａｎｇ．ｃｏｍ Niu Hang Electronic Co. Ltd Production Data Sheet GBP2005 THRU GBP210 BRIDGE RECTIFIERS VOLTAGE 50 THRU 1000 Volts 2.0 Ampers CURRENT GBP Unit:Inch(mm) FEATURES ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ High ◆ surge current capability Ideal for printed circuit boards ◆ Glass passivated chip junction MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 260℃/20 seconds Mounting Position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C(UNLESS OTHERWISE NOTED) Absolute Maximum Ratings TL=25℃ unless otherwise specified. Parameter Symbol GBP2005 GBP201 GBP202 GBP204 GBP206 GBP208 GBP210 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward output Ta=55℃ IF(AV) 2.0 A IFSM 50 A 2 14.94 A sec Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) 2 Rating for fusig (t<8.3ms) It Typical junction capacitance per leg at 4.0V 1.0Mhz CJ 25 pF Operating junction temperature range TJ -55 to +150 ℃ TSTG -55 to +150 ℃ 1.10 V Storage temperature range Electrical Characteristics TL=25℃ unless otherwise specified. Maximum instantaneous forward voltage drop per leg at 3.0A Maximum DC reverse current at rated DC blocking voltage per leg Ta=25℃ VF 10 IR Ta=125℃ Typical thermal resistance per leg (1) μA 500 RθJA 30 RθJL 11 ℃/W Note (1) Units mounted on PCB with 0.47×0.47(12×12mm) Copper Pads http://www.dgniuhang.com Date:2014/10/20 Rev.:AA Page: 1 of 5 Niu Hang Electronic Co. Ltd Production Data Sheet GBP2005 THRU GBP210 BRIDGE RECTIFIERS RATINGANDCHARACTERISTICCURVES I F, FORWARD CURRENT(A) (TA=25°C(UNLESS OTHERWISE NOTED) I F, FORWARD CURRENT(A) 4.0 3.0 2.0 Single-Phase Half Wave 60Hz Resistive or Inductive Load 1.0 0 0 50 100 150 T L , LEAD TEMPERATURE (°C) V F ,FORWARD VOLTAGE(V) Fig.2-TYPEICAL FORWARD CHARACTERISTICS CJ IR ,JUNCTION CAPACITANCE(pF) ,REVERSE CURRENT(mA) Fig.1-FORWARD CURRENT DERATING CURVE V R ,REVERSE VOLTAGE(V) PERCENT OF RATED PEAK REVERSE VOLTAGE(%) Fig.4-TYPICAL JUNCTION CAPACITANCE PEAK FORWARD SURGE CURRENT(A) Fig.3-TYPICAL REVERSE CHARACTERISTICS NUMBER OF CYCLES AT60HZ Fig.5-MAX. NON-REPETITIVE SURGE CURRENT http://www.dgniuhang.com Date:2014/10/20 Rev.:AA Page: 2 of 5 Niu Hang Electronic Co. Ltd Production Data Sheet GBP2005 THRU GBP210 BRIDGE RECTIFIERS Thermal Characteristcs (Ratings at 25℃ ambient temperature unless otherwise specified ) Parameter Symbol Typical thermal resistance 1) GBP R JA 30 R JL 11 Unit ℃/W 1.PCB Mounted with The Suggested PAD Size ORDER INFORMATION • Packing information Product code GBP2005 THRU GBP210 -GBP http://www.dgniuhang.com Pack B/P Quantity (pcs/box) 500 Box Size L×W×H (mm) Carton Size L×W×H (mm) Quantity (box/carton) 200×35×200 405×205×215 10 Date:2014/10/20 Rev.:AA Page: 3 of 5 Niu Hang Electronic Co. Ltd Production Data Sheet GBP2005 THRU GBP210 BRIDGE RECTIFIERS Recommended wave soldering condition Product Pb-free devices Peak Temperature Soldering Time 5 +1/-1 seconds 260 +0/-5 °C Recommended temperature profile for IR reflow Profile feature Average ramp-up rate (Tsmax to Tp) Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) Time maintained above: −Temperature (TL) − Time (tL) Peak Temperature(TP) Time within 5°C of actual peak temperature(tp) Ramp down rate Time 25 °C to peak temperature Sn-Pb eutectic Assembly Pb-free Assembly 3°C/second max. 3°C/second max. 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds 183°C 60-150 seconds 240 +0/-5 °C 217°C 60-150 seconds 260 +0/-5 °C 10-30 seconds 20-40 seconds 6°C/second max. 6 minutes max. 6°C/second max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. http://www.dgniuhang.com Date:2014/10/20 Rev.:AA Page: 4 of 5 Niu Hang Electronic Co. Ltd Production Data Sheet GBP2005 THRU GBP210 BRIDGE RECTIFIERS Disclaimer • Reproducing and modifying informatiom of the document is prohibited without permission from niuhang Electronics co., LTD • Niuhang Electronics co., LTD. reserves the rights to make changes of the content herein the document anytime without notification. • Niuhang Electronics co., LTD. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Niuhang Electronics co., LTD. does not assume any and all implied warranties, including warranties of fitness for particular purpose,non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Niuhang Electronics co., LTD.makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining,such as medical instruments.transportation equipment,aerospae machinery et cetera.Customers usin or selling these products for use in such applications do so at their own rish and agree to fully indemnify Niuhang Electronics co., LTD.for any damages resulting resulting from such improper use or sale. • When the appearance of the product and chip size does not change, in order to product quality, change the internal structure and the production process Niuhang can not notify the customer. http://www.dgniuhang.com Date:2014/10/20 Rev.:AA Page: 5 of 5