EcE118 Silicone Elastomer SILVER/COPPER FILLED SILICONE ELASTOMER EcE118 is a silver-coated, copper-filled, silicone elastomer. This material can be molded, extruded, or formed into sheets and then die cut. See our catalog for standard shapes that might be available to test, or provide information about your needs for a custom profile. FEATURES • Utilizes both conductive and non-conductive materials • Provides stronger environmental shielding to the outside of gaskets due to pure silicone • Retains strong EMI protection • Cost-effective solution • Able to extrude in various sizes and profiles USA: +1.866.928.8181 Europe: +49.0.8031.2460.0 Asia: +86.755.2714.1166 www.lairdtech.com MARKETS • DataCom • Military • Medical SPECIFICATIONS TARGET SPECIFICATION Color Tan Elastomer Type Silicone Filler Type Silver Copper Hardness 70 Shore A Volume Resistivity - pressure probe 0.004 ohm-cm, maximum Volume Resistivity - surface probe 0.004 ohm-cm, maximum Compression Set 30% max Tensile Strength 450 psi, minimum Elongation 100%-300% Tear Strength 55 ppi, minimum Compression/Deflection 3.5%, minimum Specific Gravity 3.3 g/cc UL94 Flame Rating V-0 Low Temperature Flexibility TR70 at -55°C Outgassing 0.06 max EMI-DS-ECE118 041715 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.