Hittite HMC854LC5 28 gbps, 4:1 mux with programmable output voltage Datasheet

HMC854LC5
v01.0610
MUX & DEMUX - SMT
3
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Typical Applications
Features
The HMC854LC5 is ideal for:
Differential & Singe-Ended Operation
• SONET OC 192
Half Rate Clock Input
• Broadband Test & Measurement
Quarter Rate Reference Clock Output
• Serial Data Transmission up to 28 Gbps
Fast Rise and Fall Times: 16 ps
• Mux modes:
4:1 @ 28 Gbps NRZ,
2:1 @ 14 Gbps RZ and NRZ
Low Power Consumption: 510 mW typ.
• FPGA Interfacing
Single Supply: -3.3V
Programmable Differential
Output Voltage Swing: 700 - 1250 mV
32 Lead Ceramic 5x5 mm SMT Package: 25 mm2
Functional Diagram
General Description
The HMC854LC5 is a 4:1 multiplexer designed for
28Gbps data serialization. The mux latches the four
differential inputs on a rising edge of the input clock.
The device uses both rising and falling edges of the
half-rate clock to serialize the data. A quarter-rate clock
output generated on chip can be used to synchronize
data into the mux. The mux is DC coupled supporting
broadband operation.
All clock and data inputs to the HMC854LC5 are CML
and terminated on-chip with 50 Ohms to the positive
supply, GND, and may be DC or AC coupled. The
differential outputs are source terminated to 50 Ohms
and may also be AC or DC coupled. Outputs can be
connected directly to a 50 Ohm ground terminated
system, or drive devices with CML logic input. The
HMC854LC5 also features an output level control pin,
VR, which allows for loss compensation or signal level
optimization. The HMC854LC5 operates from a single
-3.3V supply and is available in ROHS compliant 5x5
mm SMT package.
Electrical Specifications, TA = +25°C, Vee = -3.3V, VR = 0V
Parameter
Power Supply Voltage
Conditions
Min.
Typ.
Max
Units
-3.3
-3.0
T > 75 °C
-3.6
-3.45
V
V
Power Supply Current
155
mA
Maximum Data Rate
28
Gbps
Maximum Clock Rate, Half Rate
GHz
-1.5
0.5
V
Input Differential Voltage
100
2000
mV
Output Rise / Fall Time
Random Jitter Jr
Deterministic Jitter, Jd
3-1
14
Input Voltage Range, CML
Differential, 20% - 80%
16
ps
rms
0.5
ps rms
peak-to-peak, 215 -1 PRBS input [1]
4
ps, p-p
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Electrical Specifications, (continued)
Conditions
Min.
Typ.
Frequency <12 GHz
Max
Units
10
dB
Single-Ended, peak-to-peak
500
mVp-p
Differential, peak-to-peak
1000
mVp-p
0
mV
-500
mV
10
dB
Propagation Delay Clock to Data, Tdpd
126
ps
Propagation Delay Clock to
Output Clock, Tcpd
135
deg
Set Up Time, ts
-41
ps
Hold Time, th
50
ps
Output Amplitude
Output High Voltage
Output Low Voltage
Output Return Loss
Frequency <12 GHz
200
1500
190
1400
180
DIFFERENTIAL VOLTAGE (mV)
DC CURRENT (mA)
DC Current vs. Supply Voltage
Output Differential
vs. Supply Voltage [1] [2]
[1] [2]
+25C
+85C
-40C
170
160
150
140
130
120
110
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
1300
1200
1100
1000
900
800
+25C
+85C
-40C
700
600
500
-3.7
-2.9
-3.6
-3.5
SUPPLY VOLTAGE (V)
-3.4
-3.3
-3.2
-3.1
-3
-2.9
SUPPLY VOLTAGE (V)
Output Differential vs. VR [2][3]
Delay vs. Temperature [1][3]
150
1400
1300
Clk In to Clk Out
Clk In to Data Out
1200
+25C
+85C
-40C
1100
140
DELAY (ps)
DIFFERENTIAL VOLTAGE (mV)
3
MUX & DEMUX - SMT
Parameter
Input Return Loss
1000
900
800
700
130
120
600
500
400
-1.2
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
VR (V)
[1] VR = 0.0V
[2] Frequency = 28 Gbps
110
-40
-15
10
35
60
85
TEMPERATURE (°C)
[3] Vee = -3.3V
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3-2
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Rise / Fall Time vs. Supply Voltage [1][2]
Rise / Fall Time vs. VR [2][4]
20
tr
tf
16
14
12
16
14
12
10
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
10
-1.2
-2.9
-1
-0.8
-0.6
SUPPLY VOLTAGE (V)
-0.4
-0.2
0
0.2
0.4
VR (V)
Input Return Loss vs. Frequency [1][3][4]
Output Return Loss vs. Frequency [3]
5
5
0
-5
RETURN LOSS (dB)
0
-5
-10
-15
-20
-25
-30
-10
-15
-20
-25
-30
-35
-35
0
5
10
15
FREQUENCY (GHz)
[1] VR = 0.0V
3-3
tr
tf
18
RISE/FALL TIME (ps)
RISE/FALL TIME (ps)
18
RETURN LOSS (dB)
MUX & DEMUX - SMT
3
20
[2] Frequency = 28 Gbps
20
25
0
5
10
15
20
25
FREQUENCY (GHz)
[3] Device measured on evaluation board with port extensions
[4] Vee = -3.3V
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Eye Diagram @ 28 Gbps
Test Conditions:
Eye Diagram @ 30 Gbps
Test Conditions:
Single ended 550 mV data and 400 mV clock inputs.
Pattern generated with four 215 -1 PN patterns applied
to the inputs resulting in a Quasi-Periodiic PRBS
pattern at 30 Gbps. Measured using Tektronix CSA
8000
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3
MUX & DEMUX - SMT
Single ended 550 mV data and 400 mV clock inputs.
Pattern generated with four 215 -1 PN patterns applied
to the inputs resulting in a Quasi-Periodiic PRBS
pattern at 28 Gbps. Measured using Tektronix CSA
8000
3-4
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Timing Diagram
MUX & DEMUX - SMT
3
3-5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Absolute Maximum Ratings
-3.75V to +0.5V
Input Signals
-2V to +0.5V
Output Signals
-1.5V to +0.5V
Junction Temperature
125 °C
Continuous Pdiss (T = 85 °C)
(derate 33 mW/°C above 85 °C )
1.33 W
Thermal Resistance (Rth j-p)
Worse case device to package paddle
30 °C/W
Storage Temperature
-65°C to +150°C
Operating Temperature
-40°C to +85°C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
3
MUX & DEMUX - SMT
Power Supply Voltage (Vee)
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO Vee.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3-6
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Pin Descriptions
Pin Number
MUX & DEMUX - SMT
3
3-7
Function
Description
1, 2, 25, 29, 32
N/C
No connection necessary. These pins may be connected to
RF/DC ground without affecting performance.
3, 6, 9, 12,
13, 16, 19,
22, 26, 31
GND
These pins must be connected
to a high quality RF/DC ground.
4, 5,
7, 8,
17, 18,
20, 21
D2-, D2+
D4-, D4+
D3+, D3D1+, D1-
Differential Data Inputs:
Current Mode Logic(CML) referenced to positive supply
10, 11
D-, D+
Differential Data Outputs: Current Mode Logic (CML)
referenced to positive supply
14, 15
C/2+, C/2-
Differential Half-Rate Clock Inputs: Current Mode Logic
(CML) referenced to positive supply
23, 24
C/4+, C/4-
Differential Quarter-Rate Clock Outputs: Current Mode
Logic(CML) referenced to positive supply
27, 30,
Package Base
Vee
These pins and the exposed paddle must be connected to
the negative voltage supply.
28
VR
Output level control. Output level may be increased
or decreased by applying a voltage to VR per “Output
Differential vs. VR” plot.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Evaluation PCB
MUX & DEMUX - SMT
3
List of Materials for Evaluation PCB 126578 [1]
Item
Description
J7 - J10
PCB Mount K RF Connectors
J3 - J6, J11 - J16
PCB Mount SMA RF Connectors
J18 -J21
DC Pin
JP1
2 Position Header with Shunt
C1, C2
4.7 µF Capacitor, Tantalum
C3 - C5
100 pF Capacitor, 0402 Pkg.
R1
10 Ohm Resistor, 0603 Pkg.
U1
HMC854LC5 28 Gbps 4:1 Mux
PCB [2]
126576 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground leads should be connected directly to the
ground plane similar to that shown. The exposed
metal package base must be connected to Vee. A
sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request. Install jumper on JP1 to short
VR to GND for normal operation.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3-8
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Application Circuit
MUX & DEMUX - SMT
3
3-9
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC854LC5
v01.0610
28 Gbps, 4:1 MUX
WITH PROGRAMMABLE OUTPUT VOLTAGE
Notes:
MUX & DEMUX - SMT
3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3 - 10
Similar pages