AFBR-4536EZ, -4536BZ, -4536DZ Plastic Optical Duplex Bulkhead Connector Suitable For Duplex Connector AFBR-452xZ Data Sheet Description Features Avago Technologies' AFBR-4536xZ duplex bulkhead connectors are designed for use with Avago Technologies’ duplex connectors AFBR-452xZ. Its rugged design contains a latching mechanism for an increased retention force. The simple snap-together concept saves the user labor and tool cost. • Thermocomp ® Plastic Material (UL File #E121562) The connectors are made of a rugged, flame retardant plastic which is suitable for industrial and other harsh environments. The AFBR-4536xZ duplex bulkhead connectors are for use with Plastic Optical Fiber (POF) only. Applications The AFBR-4536EZ uses standard black port color, AFBR4536BZ has a blue colored port and AFBR-4536DZ has one black and one blue port. This product is lead free and compliant with RoHS. • Proprietary System Interconnects • Available in two colors: black and blue • Excellent Retention Force • Symmetry in Non-latching Connector Gives Simplex/ Duplex Functionality with the Same Part • Industrial Control and Voltage Isolation • Automotive Networks • Gaming Equipment • Medical Equipment • Telecommunications • Data Communications Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Notes Storage Temperature TST -40 +85 °C 1 Recommended Operating Temperature TOP -40 +85 °C 1 Installation Temperature TINST 0 +70 °C 1 Notes: 1. Storage and operating temperatures refer to the ranges over which the connectors can be used when not subjected to mechanical stress. Installation temperature refers to the ranges over which connectors may be installed onto the fiber and over which connectors can be connected and disconnected from the transceiver. Mechanical and Optical Characteristics Parameter Symbol Min. Typ. Retention force, bulkhead to duplex connector; latching button pressed FRP 15 Retention force, bulkhead to duplex connector; latching button NOT pressed FRNP-25 Retention force, bulkhead to duplex connector; latching button NOT pressed FRNP Insertion force, bulkhead to duplex connector FI 30 Insertion loss using AFBR-4526Z duplex connector PATT 1.5 Max. Unit Temp. [°C] Notes 35 N 25 1 45 N 25 1 N -40 to 85 2 20 N 2.5 1 dB -40 to 85 3 Notes: 1. Typical data are at 25°C. 2. Usually, the button of the latching mechanism shall be pressed when disconnecting the fiber. If the connector is pulled out of the bulkhead connector while the lever is not pressed, the latching mechanism will degrade significantly after the first cycle 3. Well polished POF surfaces, measured at beginning of life (0hrs) using original Avago 1m cable assembly. The typical value is valid for room temperature. Package Dimensions 16.2 11.5 5.5 11 4.42 ∅ Surface cutout 30 23 15.51 10.16 29.56 ∅ M3 For product information and a complete list of distributors, please go to our web site: 3.9 www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2015 Avago Technologies. All rights reserved. AV02-4967EN - July 1, 2015 3.2