CVHD-930 Model 9X14 mm SMD, 3.3V, CMOS Frequency Range: 10MHz to 49.152MHz Temperature Range: (Option X) 0°C to 70°C -40°C to 85°C Storage: -55°C to 120°C Input Voltage: Control Voltage: Settability At Nominal: Input Current: 3.3V ± 0.3V 1.65V ± 1.65V 1.65V ± 0.25V 25mA Max Output: Symmetry: Rise/Fall Time: Pullability APR: Linearity: Load: Logic "1" Level: Logic "0" Level: Start-up time: CMOS 47.5/52.5 Typical, 45/55% Max 5ns Max @ 20% to 80% Vcc ±50ppm Min. ± 10% Max 30pF Max 90% Vdd Max 10% Vdd Min. 2ms Typ., 5ms Max Modulation BW: Sub-harmonics: >10KHz @ -3dB none Period Jitter: Phase Jitter: <5ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max, <1ps RMS (1-sigma) Max, (20,000 periods) 12KHz~20MHz 50KHz~80MHz ee Fr ad HS t e L Ro plian m Co Phase Noise Typical: 10Hz 100Hz 1KHz 10KHz 100KHz -80 dBc/Hz -110 dBc/Hz -140 dBc/Hz -152 dBc/Hz -155 dBc/Hz Aging: <3ppm 1st/yr, <1ppm every year thereafter Applications: Broadband Networks SONET/SDH/DWD ATM Network/switch Telecom Designed using FR5 PCB & Fundamental AT crystal technology to provide a Low Noise, Low Jitter Voltage Controlled Crystal Oscillator solution at a competitive price. Specifications subject to change without notice. TD-040101 Rev. D Page 1 of 2 CVHD-930 Model 9X14 mm SMD, 3.3V, CMOS ee Fr ad HS t e L Ro plian m Co 0.560 (14.2) Crystek Part Number Guide CVHD-930 X-49.152 #1 #2 #3 CRYSTEK P/N Frequency Date Code 0.360 (9.14) #4 #1 Crystek 9x14 SMD CMOS VCXO #2 Model 930 = High Performance 3.3V #3 Temp. Range: Blank = 0/70°C, X=-40/85°C #4 Frequency in MHz: 3 or 6 decimal places Bottom View 0.040 (1.01) 0.560 (14.2) 1 0.070 (1.77) 0.210 (5.3) 0.200 (5.08) Pad Connection 1 2 3 4 Volt Cont. GND OUT Vdd SUGGESTED PAD LAYOUT RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE 260°C Critical Temperature Zone Ramp-Down 6°C/Sec. 217°C 200°C 3 4 Example: CVHD-930X-49.152 = 3.3V, -40/85°C, 49.152 MHz Ramp-Up 3°C/Sec Max. 2 0.050 (1.27) 0.090 (2.28) 0.280 (7.11) 150°C Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 0.200 (5.08) 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Packaging: Tape/Reel: 100ea, 250ea,500ea 24mm Tape Specifications subject to change without notice. TD-040101 Rev. D Page 2 of 2