Technical Data 4426 Effective March 2015 Supersedes December 2013 Bussmann H15 Family PCB fuse holders for 5x20mm fuses Agency information • cURs Recognition file number: E14853 Guide IZLT2/IZLT8 • VDE file 40039714 Ordering • Specify packaging prefix, part number, and option code as shown Packaging prefix BK- Part number H15-V-1 Option code B Packaging prefixes • BK- (Bulk, 200 parts per box--100 parts per box if using option code B or K) • BK1- (Bulk, 1000 parts per box) Option code Product description • For 5x20mm fuses • Fuse carriers are interchangeable • Vertical (-V) or horizontal (-H) mounting • Fuse carrier and knob are spring loaded bayonet type with screwdriver slot • Solderability in accordance with IEC 68-2-20 • Shock safety of PC2 • High temperature thermoplastic meets: - UL 94V0 - Glow wire test: 960°C per IEC 695-2-1 • Blank (Fuse holder body and knob set) • B- (Fuse holder body) • K- (Fuse holder knob) The Bussmann brand of circuit protection products (formerly of the Bussmann Division of Cooper Industries) is now part of Eaton’s Electrical Group, Electronics Division. Bussmann is now part of Eaton Same great products plus even more. H15 Family PCB fuse holders for 5x20mm fuses Technical Data 4426 Effective March 2015 Dimensions (mm) Drawing Not to Scale H15-V-1 H15-H-1 1.303" Mounting Holes (33.1mm) 1.303" (33.1mm) Mounting Holes .051" ± .002" Dia. (Typ.) (1.30 ± .05mm) Printed Circuit Board .394" .394" (10.0mm) Printed Circuit Board .051" ± .002" Dia. (Typ.) (1.30 ± .05mm) Component Material .512" .512" (13.0mm) (13.0mm) FU (10.0mm) SE FU .461" SE .461" (11.7mm) Clip Tin plated Terminals Copper, Tin plated Body Thermoplastic (11.7mm) Product specifications Agency information/current rating Part Number1 Orientation/ Mounting Voltage rating Vac Ambient temperature Temperature rise VDE cURus H15-V-1 Vertical 250 24°C 41°C 6.3A 6.3A H15-H-1 Horizontal 250 24°C 41°C 6.3A 6.3A 1. Part number definition H15-x-1 H15= Product code and size x= V (Vertical), H (Horizontal) 1= Threaded cap/carrier Soldering Method Wave immersion: 260°C, 10 seconds maximum Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/elx © 2015 Eaton All Rights Reserved Printed in USA Publication No. 4426- BU-SB15124 March 2015 Eaton is a registered trademark. All other trademarks are property of their respective owners.