SMT Power Inductor HMP1335, 1340, 1345 & 1348S Type Features RoHS compliant. Low profile, SMD type. High current. Magnetic shielded. High energy storage and low DCR. Provided with embossed carrier tape packing. Ideal for power source circuits, DC-DC converter, DC-AC inverters inductor applications. In addition to the standard versions shown here, customized inductors are available to meet your exact requirements. Mechanical Dimension : RECOMMENDED PAD PATTERNS B¡ Ó F C H G K D UNIT : mm/inch D = 7.80 / 0.307 F = 2.50 / 0.098 G = 2.50 / 0.098 H = 8.00 / 0.315 J = 3.20 / 0.126 K = 7.00 / 0.276 L = 14.00 / 0.551 M = 3.70 / 0.146 M O N A J E L UNIT : mm/inch 1 PART NO. A N E O HMP1335 12.70 0.5 / 0.50 0.02 13.00 0.5 / 0.512 0.02 3.50 / 0.138 2.40 / 0.094 11.20 / 0.441 4.40 / 0.173 HMP1340 12.70 0.5 / 0.50 0.02 13.00 0.5 / 0.512 0.02 4.00 / 0.157 2.40 / 0.094 11.20 / 0.411 4.40 / 0.173 HMP1345 12.70 0.5 / 0.50 0.02 13.00 0.5 / 0.512 0.02 4.50 / 0.177 2.40 / 0.094 11.20 / 0.411 4.40 / 0.173 HMP1348S 12.70 0.5 / 0.50 0.02 13.00 0.5 / 0.512 0.02 4.80 / 0.189 1.80 / 0.071 10.60 / 0.417 5.00 / 0.197 Electrical Characteristics : At 25oC: 100KHz, 1V L1 (uH) 1. 2. 3. 4. C (MAX) B Li (uH) MIN (m DCR ) MAX I sat 2 (Adc) I rms 3 (Adc) HMP1335-4R6LD 4.6 3.40 7.4 7.5 14.0 HMP1340-0R8 0.8 0.64 2.5 24.0 19.0 HMP1340-1R5 1.5 1.20 4.3 20.0 15.0 HMP1340-2R0 2.0 1.60 4.3 12.0 15.0 HMP1340-2R2 2.2 1.76 4.3 12.0 15.0 HMP1340-3R3 3.3 2.64 6.6 9.5 12.6 HMP1340-4R7 4.7 3.76 8.5 9.0 11.0 HMP1340-5R6 5.6 4.50 11.0 8.0 10.0 HMP1345-0R6 0.6 0.48 1.3 25.0 21.0 HMP1348S-0R4 0.4 0.32 0.9 36.0 39.0 Tolerance of inductance is 20%. Isat is the DC current which cause the inductance drop to Li. Irms is the DC current which cause the surface temperature of the part increase less than 45OC. Operating temperature : -20OC to 105OC ( including self-temperature rise ). DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C. TEL: 886-3-3591968; FAX: 886-3-3591991 http://www.deltaww.com 120