Vishay ESH1B Surface mount ultrafast plastic rectifier Datasheet

ESH1B, ESH1C & ESH1D
Vishay General Semiconductor
Surface Mount Ultrafast Plastic Rectifiers
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Ultrafast recovery times for high efficiency
• Low forward voltage, low power loss
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
DO-214AC (SMA)
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in secondary rectification and freewheeling for
ultrafast switching speeds ac-to-ac and dc-to-dc
converters in high temperature conditions for both
consumer and automotive applications.
PRIMARY CHARACTERISTICS
IF(AV)
1A
VRRM
100 V, 150 V, 200 V
trr
25 ns
VF
0.90 V
TJ max.
175 °C
MECHANICAL DATA
Case: DO-214AC (SMA)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
VRRM
Maximum RMS voltage
ESH1B
ESH1C
ESH1D
EHB
EHC
EHD
100
150
200
UNIT
V
VRMS
70
105
140
V
Maximum DC blocking voltage
VDC
100
150
200
V
Maximum average forward rectified current at TL = 150 °C
IF(AV)
1.0
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
50
A
TJ, TSTG
- 55 to + 175
°C
Operating junction and storage temperature range
Document Number: 88890
Revision: 27-Aug-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
ESH1B, ESH1C & ESH1D
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 0.7 A
IF = 1 A
Maximum instantaneous forward voltage
SYMBOL
VALUE
UNIT
VF
0.87
0.90
V
IR
1.0
25
µA
(1)
Maximum DC reverse current at rated
DC blocking voltage
TA = 25 °C
TA = 125 °C
Maximum reverse current
VR = 20 V, TJ = 150 °C
IR
50
µA
Maximum reverse recovery time
IF = 0.5 A, IR = 1 A, Irr = 0.25 A
trr
25
ns
Typical reverse recovery time
IF = 0.6 A, VR = 30 V,
dI/dt = 50 A/µs, Irr = 10 % IRM
TJ = 25 °C
TJ = 100 °C
trr
25
35
ns
Typical stored charge
IF = 0.6 A, VR = 30 V,
dI/dt = 50 A/µs, Irr = 10 % IRM
TJ = 25 °C
TJ = 100 °C
Qrr
10
15
nC
Typical junction capacitance
4.0 V, 1 MHz
CJ
25
pF
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
ESH1B
ESH1C
RθJA
RθJL
Typical thermal resistance (1)
ESH1D
UNIT
85
30
°C/W
Note:
(1) Units mounted on P.C.B. with 5.0 x 5.0 mm (0.013 mm thick) land areas
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
ESH1D-E3/61T
0.064
61T
1800
7" diameter plastic tape and reel
ESH1D-E3/5AT
0.064
5AT
7500
13" diameter plastic tape and reel
ESH1DHE3/61T (1)
0.064
61T
1800
7" diameter plastic tape and reel
ESH1DHE3/5AT (1)
0.064
5AT
7500
13" diameter plastic tape and reel
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
50
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
1.2
1.0
0.8
0.6
TL Measured
at the Cathode Band Terminal
0.4
0.2
40
30
20
10
0
0
95
105
115
125
135
145
155
165
175
1
100
10
Lead Temperature (°C)
Number of Cycles at 60 Hz
Figure 1. Maximum Forward Current Derating Curve
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88890
Revision: 27-Aug-07
ESH1B, ESH1C & ESH1D
Vishay General Semiconductor
100
100
TJ = 150 °C
Junction Capacitance (pF)
Instantaneous Reverse Leakage
Current (µA)
TJ = 175 °C
10
TJ = 125 °C
1
TJ = 100 °C
0.1
0.01
TJ = 125 °C
0.001
20
1
40
60
80
100
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
Reverse Voltage (V)
Figure 3. Typical Reverse Leakage Characteristics
Figure 5. Typical Junction Capacitance
100
Transient Thermal Impedance (°C/W)
100
Instantaneous Forward Current (A)
10
TJ = 125 °C
10
TJ = 150 °C
1
TJ = 175 °C
TJ = 25 °C
0.1
0.01
0.2
0.4
0.6
0.8
1.0
1.2
10
1
0.01
1.4
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Figure 4. Typical Instantaneous Forward Characteristics
Figure 6. Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
MIN.
0.208
(5.28) REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Document Number: 88890
Revision: 27-Aug-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages