DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS (LOW INPUT CURRENT) MOCD217-M DESCRIPTION The MOCD217-M device consists of two gallium arsenide infrared emitting diodes optically coupled to two monolithic silicon phototransistor detectors, in a surface mountable, small outline plastic package. It is ideally suited for high density applications and eliminates the need for through-the-board mounting. FEATURES • U.L. Recognized (File #E90700, Volume 2) • VDE Recognized (File #136616) (add option “V” for VDE approval, i.e, MOCD217V-M) • Low Input Current (Specified @ 1 mA) • Minimum BVCEO of 30 Volts Guaranteed • Convenient Plastic SOIC-8 Surface Mountable Package Style • Standard SOIC-8 Footprint, with 0.050" Lead Spacing • Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering • High Input-Output Isolation of 2500 VAC(rms) Guaranteed ANODE 1 1 CATHODE 1 2 ANODE 2 3 APPLICATIONS CATHODE 2 4 8 COLLECTOR 1 7 EMITTER 1 6 COLLECTOR 2 5 EMITTER 2 • Interfacing and coupling systems of different potentials and impedances • General purpose switching circuits • Monitor and detection circuits ABSOLUTE MAXIMUM RATINGS (TA = 25°C Unless otherwise specified) Rating EMITTER Forward Current - Continuous Forward Current - Peak (PW = 100 µs, 120 pps) Reverse Voltage LED Power Dissipation @ TA = 25°C Derate above 25°C DETECTOR Collector-Emitter Voltage Emitter-Collector Voltage Collector Current-Continuous Detector Power Dissipation @ TA = 25°C Derate above 25°C TOTAL DEVICE Input-Output Isolation Voltage(1,2,3) (f = 60 Hz, 1 min. Duration) Total Device Power Dissipation @ TA = 25°C Derate above 25°C Ambient Operating Temperature Range Storage Temperature Range © 2005 Fairchild Semiconductor Corporation Symbol Value Unit IF IF (pk) VR 60 1.0 6.0 90 0.8 mA A V mW mW/°C 30 7.0 150 150 1.76 V V mA mW mW/°C 2500 Vac(rms) 250 2.94 -40 to +100 -40 to +125 mW mW/°C °C °C PD VCEO VECO IC PD VISO PD TA Tstg Page 1 of 8 7/7/05 DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS (LOW INPUT CURRENT) MOCD217-M ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Parameter Test Conditions Symbol Min Typ** Max Unit IF = 1.0 mA VF — 1.05 1.3 V VR = 6.0 V IR — 0.1 100 µA C — 18 — pF ICEO1 — 1.0 50 nA EMITTER Input Forward Voltage Reverse Leakage Current Capacitance DETECTOR Collector-Emitter Dark Current VCE = 10 V, TA = 25°C ICEO2 — 1.0 — µA Collector-Emitter Breakdown Voltage IC = 100 µA BVCEO 30 90 — V Emitter-Collector Breakdown Voltage IE = 100 µA BVECO 7.0 7.8 — V f = 1.0 MHz, VCE = 0 V CCE — 7.0 — pF IF = 1.0 mA, VCE = 5 V CTR 100 130 — % Collector-Emitter Capacitance VCE = 10 V, TA = 100°C COUPLED Output Collector Current(4) Collector-Emitter Saturation Voltage IC = 100 µA, IF = 1.0 mA VCE (sat) — 0.35 0.4 V Turn-On Time IC = 2.0 mA, VCC = 10 V, RL = 100 Ω (fig 6.) ton — 7.5 — µs Turn-Off Time IC = 2.0 mA, VCC = 10 V, RL = 100 Ω (fig 6.) toff — 5.7 — µs Rise Time IC = 2.0 mA, VCC = 10 V, RL = 100 Ω (fig 6.) tr — 3.2 — µs Fall Time IC = 2.0 mA, VCC = 10 V, RL = 100 Ω (fig 6.) tf — 4.7 — µs VISO 2500 — — Vac(rms) VI-O = 500 V RISO 1011 — — Ω VI-O = 0 V, f = 1 MHz CISO — 0.2 — pF Isolation Surge Voltage(1,2,3) Isolation Resistance(2) Isolation Capacitance(2) f = 60 Hz, t = 1 min. ** Typical values at TA = 25°C NOTE: 1. Input-Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating. 2. For this test, Pins 1, 2, 3 and 4 are common and Pins 5, 6, 7 and 8 are common. 3. VISO rating of 2500 VAC(rms) for t = 1 min. is equivalent to a rating of 3,000 VAC(rms) for t = 1 sec. 4. Current Transfer Ratio (CTR) = IC/IF x 100%. © 2005 Fairchild Semiconductor Corporation Page 2 of 8 7/7/05 DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS (LOW INPUT CURRENT) MOCD217-M Fig. 2 Output Curent vs. Input Current Fig. 1 LED Forward Voltage vs. Forward Current 1.8 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 VF - FORWARD VOLTAGE (V) 1.7 1.6 1.5 1.4 TA = -55°C 1.3 1.2 TA = 25°C 1.1 TA = 100°C 1.0 1 10 100 VCE = 5V NORMALIZED TO IF = 10mA 1 0.1 IF - LED FORWARD CURRENT (mA) 0.01 0.1 1 Fig. 3 Output Current vs. Ambient Temperature 10 100 IF - LED INPUT CURRENT (mA) 10 I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) I C - OUTPUT COLLECTOR CURRENT (NORMALIZED) Fig. 4 Output Current vs. Collector - Emitter Voltage 1.6 1 NORMALIZED TO TA = 25 o C 0.1 -80 -60 -40 -20 0 20 40 60 80 100 1.4 1.2 1.0 0.8 0.6 0.4 0.2 I F = 10mA NORMALIZED TO VCE = 5V 0.0 0 120 1 2 3 4 5 6 7 8 9 10 VCE - COLLECTOR -EMITTER VOLTAGE (V) o TA - AMBIENT TEMPERATURE ( C) Fig. 5 Dark Current vs. Ambient Temperature I CEO - COLLECTOR -EMITTER DARK CURRENT (nA) 10000 VCE=10V 1000 100 10 1 0.1 0 20 40 60 80 100 o TA - AMBIENT TEMPERATURE ( C) © 2005 Fairchild Semiconductor Corporation Page 3 of 8 7/7/05 DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS (LOW INPUT CURRENT) MOCD217-M TEST CIRCUIT WAVE FORMS VCC = 10V INPUT PULSE IF IC INPUT RL 10% OUTPUT OUTPUT PULSE 90% tr Adjust IF to produce IC = 2 mA ton tf toff Figure 6. Switching Time Test Circuit and Waveforms © 2005 Fairchild Semiconductor Corporation Page 4 of 8 7/7/05 DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS (LOW INPUT CURRENT) MOCD217-M Package Dimensions (Surface Mount) 8-Pin Small Outline PIN 1 ID. 0.024 (0.61) SEATING PLANE 0.164 (4.16) 0.144 (3.66) 0.060 (1.52) 0.202 (5.13) 0.182 (4.63) 0.275 (6.99) 0.155 (3.94) 0.010 (0.25) 0.006 (0.16) 0.143 (3.63) 0.123 (3.13) 0.021 (0.53) 0.011 (0.28) 0.008 (0.20) 0.003 (0.08) 0.244 (6.19) 0.224 (5.69) 0.050 (1.27) 0.050 (1.27) TYP Lead Coplanarity : 0.004 (0.10) MAX © 2005 Fairchild Semiconductor Corporation Page 5 of 8 7/7/05 DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS (LOW INPUT CURRENT) MOCD217-M ORDERING INFORMATION Option Order Entry Identifier V V R1 R1 R1V R1V R2 R2 R2V R2V Description VDE 0884 Tape and reel (500 units per reel) VDE 0884, Tape and reel (500 units per reel) Tape and reel (2500 units per reel) VDE 0884, Tape and reel (2500 units per reel) MARKING INFORMATION 1 D217 V X YY S 3 4 2 6 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code, e.g., ‘3’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code © 2005 Fairchild Semiconductor Corporation Page 6 of 8 7/7/05 DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS (LOW INPUT CURRENT) MOCD217-M Carrier Tape Specifications 8.0 ± 0.10 3.50 ± 0.20 2.0 ± 0.05 Ø1.5 MIN 4.0 ± 0.10 0.30 MAX 1.75 ± 0.10 5.5 ± 0.05 12.0 ± 0.3 8.3 ± 0.10 5.20 ± 0.20 Ø1.5 ± 0.1/-0 6.40 ± 0.20 0.1 MAX User Direction of Feed Reflow Profile 300 260°C 280 260 >245°C = 42 Sec 240 220 200 180 °C Time above 183°C = 90 Sec 160 140 120 1.822°C/Sec Ramp up rate 100 80 60 40 33 Sec 20 0 0 60 120 180 270 360 Time (s) © 2005 Fairchild Semiconductor Corporation Page 7 of 8 7/7/05 DUAL CHANNEL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLERS (LOW INPUT CURRENT) MOCD217-M DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2005 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 8 of 8 7/7/05