APL1117D/R 1A, Low Dropout Fast Response Positive Regulator Fixed 3.3V and 5.0V Features General Description • • • The APL1117D/R is a low dropout three-terminal fixed 3.3V and 5.0V regulators with 1A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications , the APL1117D/R has been optimized. The dropout voltage is guaranteed at a maximum of 1.3V at 0.8A. Current limit is trimmed to ensure specified output current and controlled shortcircuit current. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures. The APL1117D/R is available in the industry standard 3pin SOT-223 and TO-252 the low profile surface mount packages which can be used in applications where space is limited. Guaranteed Output Voltage Accuracy within 2% Fast Transient Response Guaranteed Dropout Voltage at Multiple Currents • • • • • • Load Regulation : 0.1% Typ. Line Regulation : 0.03% Typ. Low Dropout Voltage : 1.2V Typ. at IOUT =0.8A Current Limit : 1A Typ. at TJ=125 °C On-Chip Thermal Limiting : 150 °C Typ. Standard 3-pin SOT-223 and TO-252 Power Packages Pin Description Applications • • • • Front View for SOT-223 Active SCSI Terminators Low Voltage Logic Supplies Battery-Powered Circuitry 1 2 3 Post Regulator for Switching Power Supply APL1117D APL1117R GND VOUT VIN VIN GND VOUT Front View for TO-252 1 APL1117D APL1117R 2 3 GND VOUT VIN VIN GND VOUT ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 1 www.anpec.com.tw APL1117D/R Ordering and Marking Information Package Code U : T O -2 5 2 V : S O T -2 2 3 Tem p. R ange C : 0 to 7 0 ° C H a n d lin g C o d e TU : Tube TR : Tape & Reel V o lta g e C o d e 3 3 : 3 .3 V 5 0 : 5 .0 V L e a d F re e C o d e L : L e a d F re e D e v ic e B la n k : O rig in a l D e v ic e A P L 1 1 1 7 D /R L e a d F re e C o d e H a n d lin g C o d e Tem p. R ange Package Code V o lta g e C o d e A P L 1 1 1 7 D /R -3 3 U : 33 A P L 1 1 1 7 D /R XXXXX XXXXX - D a te C o d e A P L 1 1 1 7 D /R -3 3 U : A P L 1 1 1 7 D /R XXXXX33 X X X X X - D a te C o d e XXXXX - D a te C o d e A P L 1 1 1 7 D /R -5 0 U : A P L 1 1 1 7 D /R XXXXX50 X X X X X - D a te C o d e 50 A P L 1 1 1 7 D /R -5 0 U : A P L 1 1 1 7 D /R XXXXX Absolute Maximum Ratings Symbol VI TJ Parameter Rating Unit 13.2 V °C TSTG Input Voltage Operating Junction Temperature Range Control Section Power Transistor Storage Temperature Range 0 to 125 0 to 150 -65 to +150 °C TL Lead Temperature (Soldering, 10 second) 260 °C Electrical Characteristics Symbol V OUT REG LINE REG LOAD VD I LIMT PSRR TR TS LS Parameter Test Conditions APL1117D/R-33 T J =0~125°C, APL1117D/R-50 0≤I OUT ≤0.8A, 4.75V≤V IN ≤12V Line Regulation T J =0~125°C, I OUT =0.8A, 4.75V≤V IN ≤7.75V (Note1) Load Regulation T J =0~125°C, V IN =4.75A, 0V≤I OUT ≤0.8A (Note1) APL1117D/R Unit Min. Typ. Max. 3.235 3.300 3.365 V 4.900 5.000 5.100 1 6 mV 1 10 mV 1.3 V Dropout Voltage I OUT ≤0.8A,T J =0~125°C 1.2 Current Lim it (V IN -V OUT )=5V, T J =25°C 1 A Ripple Rejection F RIPPLE =120Hz, V RIPPLE =1 VP-P (V IN -V OUT )=3V,T J =0~125°C 75 dB 0.01 %/W 0.5 % 0.3 % Thermal Regulation T J =25°C, 30ms Pulse Temperature Stability Long -Term Stability Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 T J =125°C, 1000Hrs 2 60 www.anpec.com.tw APL1117D/R Electrical Characteristics Symbol Parameter Test Conditions VN RMS Output Noise θ th Thermal Resistance Junction to Case, at Tab Junction to ambient Over Temperature Point Quiescent Current T J=0~125°C, V IN ≤12V OT APL1117D/R Unit Min. Typ. Max. T J=25°C,10Hz≤F≤10kHz, (% of V OUT ) 0.003 % 15 50 °C/ W 150 °C 5.5 10 mA Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are measured at a constant junction temperature by low duty cycle pulse testing. Note 2: Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/ output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage curve. Note 3: Minimum load current is defined as the minimum output current required to maintain regulation. Application Schematic APL1117D/R VIN=5~12V + CIN 10uF Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 3 VOUT + COUT1 + COUT2 0.1uF 10uF www.anpec.com.tw APL1117D/R Typical Characteristics Input Current vs. Temperature Current Limit vs. Temperature V out=3.3V 8 7 1.2 6 Current Limit (mA) Input Current (mA) V out=3.3V 1.3 5 4 3 1.1 1 Vin-Vout=5V 0.9 0.8 2 -5 0 -2 5 0 25 50 75 1 00 0.7 -50 1 25 -30 -10 10 Temperature (°C) 50 70 90 110 130 150 Temperature (°C) Load Transient Response Line Transient Response V out=3.3V 5 30 V out=3.3V 0.02 6 0.15 3.5 3 0 2.5 CIN=10uF Cout=10uF Tantalum V IN=5V 2 1.5 -0.01 1 -0.02 5 0.1 Input Voltage (V) 0.01 Output Voltage Deviation (V) Output Current (A) 4 4 CIN=10uF Cout=10uF Tantalum IOUT=0.1A 3 0.05 2 0 1 Output Voltage Deviation (V) 4.5 0.5 0 -100 100 200 300 400 500 600 700 800 900 -20 30 80 130 180 Time (µs) Time (µs) Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 -0.05 0 -0.03 0 4 www.anpec.com.tw APL1117D/R Typical Characteristics Output Voltage vs. Input Voltage Dropout Voltage vs. Output Current V out=3.3V 1.3 1.25 3 1.2 Outputt Voltage (V) Dropout Voltage (V) V out=3.3V 3.5 1.15 1.1 1.05 1 2.5 2 1.5 1 0.5 0.95 0.9 0 0 0.2 0.4 0.6 0.8 1 0 1 2 3 Output Current (A) 5 6 7 8 9 Iutput Voltage (V) Input Current vs. Input Voltage Current Limit vs. Input Voltage V out=3.3V 6 V out=3.3V 1.12 5 1.1 Current Limit (A) Input Current (mA) 4 4 3 2 1.08 1.06 1.04 1.02 1 1 0 0 2 4 6 8 4 10 Input Voltage (V) Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 5 6 7 8 9 10 11 12 13 Input Voltage (V) 5 www.anpec.com.tw APL1117D/R Typical Characteristics Cont. Output Voltage vs. Temperature V out=3.3V 3.6 Output Voltage (V) 3.5 3.4 3.3 3.2 3.1 3 -50 -25 0 25 50 75 100 125 Temperature (°C) Copyright ANPEC Electronics Corp. 6 - Jun., 2003 Rev. A.3 6 www.anpec.com.tw APL1117D/R Package Information SOT-223( Reference JEDEC Registration SOT-223) D A B1 a c H E L K e A1 e1 b B Dim A A1 B B1 c D E e e1 H L K α β Millimeters Min. 1.50 0.02 0.60 2.90 0.28 6.30 3.30 Inches Max. 1.80 0.08 0.80 3.10 0.32 6.70 3.70 Min. 0.06 Max. 0.07 0.02 0.11 0.01 0.25 0.13 0.03 0.12 0.01 0.26 0.15 2.3 BSC 4.6 BSC 6.70 0.91 1.50 0° Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 0.09 BSC 0.18 BSC 7.30 1.10 2.00 10° 0.26 0.04 0.06 0° 13° 0.29 0.04 0.08 10° 13° 7 www.anpec.com.tw APL1117D/R Package Informaion TO-252( Reference JEDEC Registration TO-252) E A b2 C1 L2 D H L1 L b C e1 D1 A1 E1 Dim M illim et er s Inc he s M in. M ax. M in. M ax. A 2. 1 8 2. 3 9 0. 0 86 0. 0 94 A1 0. 8 9 1. 2 7 0. 0 35 0. 0 50 b 0. 5 08 0. 8 9 0. 0 20 0. 0 35 b2 5. 2 07 5. 4 61 0. 2 05 0. 2 15 C 0. 4 6 0. 5 8 0. 0 18 0. 0 23 C1 0. 4 6 0. 5 8 0. 0 18 0. 0 23 D 5. 3 34 6. 2 2 0. 2 10 0. 2 45 D1 E 5. 2 R EF 6. 3 5 E1 0. 2 05 R EF 6. 7 3 0. 2 50 5. 3 R EF 0. 2 65 0. 2 09 R EF e1 3. 9 6 5. 1 8 H 9. 3 98 10 . 41 L 0. 5 1 L1 0. 6 4 1. 0 2 0. 0 25 0. 0 40 L2 0. 8 9 2. 0 32 0. 0 35 0. 0 80 Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 0. 1 56 0. 2 04 0. 3 70 0. 4 10 0. 0 20 8 www.anpec.com.tw APL1117D/R Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb), 100%Sn Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) tp TP C ritical Zone T L to T P T e m p e ra tu re R am p-up TL tL T sm ax T sm in R am p-down ts Preheat 25 t 25 °C to Peak T im e Classificatin Reflow Profiles Profile Feature Sn-Pb Eutectic Assembly Large Body Small Body Average ramp-up rate 3°C/second max. (TL to TP) Preheat - Temperature Min (Tsmin) 100°C - Temperature Mix (Tsmax) 150°C - Time (min to max)(ts) 60-120 seconds Tsmax to TL - Ramp-up Rate Tsmax to TL - Temperature(TL) 183°C - Time (tL) 60-150 seconds Peak Temperature(Tp) 225 +0/-5°C 240 +0/-5°C Time within 5°C of actual Peak 10-30 seconds 10-30 seconds Temperature(tp) Ramp-down Rate 6°C/second max. 6 minutes max. Time 25°C to Peak Temperature Pb-Free Assembly Large Body Small Body 3°C/second max. 150°C 200°C 60-180 seconds 3°C/second max 217°C 60-150 seconds 245 +0/-5°C 250 +0/-5°C 10-30 seconds 20-40 seconds 6°C/second max. 8 minutes max. Note: All temperatures refer to topside of the package. Measured on the body surface. Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 9 www.anpec.com.tw APL1117D/R Reliability Test Program Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B,A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245°C, 5 SEC 1000 Hrs Bias @125°C 168 Hrs, 100%RH, 121°C -65°C~150°C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1tr > 100mA Carrier Tape t D P Po E P1 Bo F W Ko Ao D1 T2 J C A B T1 Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 10 www.anpec.com.tw APL1117D/R Carrier Tape Application A B C J 2.5± 0.5 Po T1 16.4 +0.3 -0.2 P1 TO-252 330±3 100 ± 2 13 ± 0. 5 2 ± 0.5 Application F D D1 TO-252 7.5 ± 0.1 1.5± 0.1 Application A B 1.5+ 0.25 4.0 ± 0.1 SOT-223 330±1 62±1.5 Application F D C 12.75± 0.15 D1 SOT-223 5.5 ± 0.05 1.5+ 0.1 1.5+ 0.1 T2 P E 8 ± 0.1 1.75± 0.1 Ao W 16 + 0.3 16 - 0.1 Bo Ko t 2.0 ± 0.1 6.8 ± 0.1 10.4± 0.1 2.5± 0.1 0.3±0.05 J T1 T2 P E 2 ± 0.6 12.4 +0.2 2± 0.2 W 12 ± 0.3 8 ± 0.1 1.75± 0.1 Po P1 Ao 4.0 ± 0.1 2.0 ± 0.05 6.9 ± 0.1 Bo Ko t 7.5± 0.1 2.1± 0.1 0.3±0.05 (mm) Cover Tape Dimensions Application SOT- 223 TO- 252 Carrier Width 12 16 Cover Tape Width 9.3 13.3 Devices Per Reel 2500 2500 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. A.3 - Jun., 2003 11 www.anpec.com.tw