Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3224175112 Item: DIP24-1A75-12D Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage (<31 AT) Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (>30 AT) Operate time incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Magnetic Shield Reach / RoHS conformity Approval Approval Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 75 Min !" #$ $" "% & not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ( ) * +$ Start Value ' ' , "- * $- RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ' . / ' Conditions Min Typ ) ) 0 Max Unit 1 A - NO according to IEC 255-5 RH <45%, 200 VDC test voltage @ 10 kHz ' ' / . 1 0 black epoxy resin CuFe2P tin plated no yes NRNT2.E156887 NRNT8.E156887 Modifications in the sense of technical progress are reserved Designed at: 12.09.07 Designed by: THAUKE Approval at: 13.09.07 Approval by: RRIPPL Last Change at: 03.03.10 Last Change by: KOLBRICH Approval at: 03.03.10 Approval by: KOLBRICH Version: 03 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3224175112 Item: DIP24-1A75-12D Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Max ' 4 4 ' wave soldering max. 5 sec. 1 5' Unit 2 2 3 3 3 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max Tube per 25 piece Unit 2 Modifications in the sense of technical progress are reserved Designed at: 12.09.07 Designed by: THAUKE Approval at: 13.09.07 Approval by: RRIPPL Last Change at: 03.03.10 Last Change by: KOLBRICH Approval at: 03.03.10 Approval by: KOLBRICH Version: 03