Applied Motion Products, Inc. 404 Westridge Dr. Watsonville, CA 95076, USA 1-800-525-1609 Tel (831) 761-6555 Fax (831) 7616544 HW34-696 Product Datasheet www.Applied-Motion.com 1pc. - 403.00 50pc. - 302.25 IP65 Rated, NEMA 34 High Torque Step Motor Product Features 2-phase hybrid step motor Rated IP65 for wet and dusty environments High torque design Standard NEMA 34 dimensions Integral 10 ft shielded cable w/ cable gland Sealed laminations Front shaft seal Single shaft version standard Double shaft version with encoder available Description Product Description: The HW34-696 two-phase stepper motor is suitable for a wide range of motion control applications including wet factory environments and outdoor use. The IP65 rating means the motor is dust proof and resistant to lower pressure water jets. Key features of this rating include an integral 10 ft shielded cable, a nickel plated brass cable gland, sealed laminations and a front shaft contact seal. This motor also has an internal corrosion-resistant film coating, further protecting it in wet and humid environments. A double-shaft version with encoder is available, part number HW34-696D-YAC. IP65 specifies a product that is dust tight (no ingress of dust; complete protection against contact) and protected against water jets (water projected by a nozzle from any direction shall have no harmful effects). To see our motor design operating in a rain simulation chamber check out this video . Specifications Part Number: HW34-696 Frame Size: NEMA 34 Motor Type: High torque Part Number w/Encoder: HW34-696D-YAC Motor Length: Number of Lead Wires: Lead Wire Configuration: Lead Wire/Cable Length: Lead Wire Gauge: Unipolar Holding Torque: Bipolar Holding Torque: Step Angle: 4.59 inches 8 shielded cable, no connector 120 inches 22 AWG 778 oz-in 1062 oz-in 1.8 deg Bipolar Series Current: 2.03 A/phase Bipolar Series Resistance: 4.8 Ohms/phase Bipolar Series Inductance: 43.2 mH/phase Bipolar Parallel Current: 4.06 A/phase Bipolar Parallel Resistance: 1.2 Ohms/phase Bipolar Parallel Inductance: 10.8 mH/phase Unipolar Current: 2.9 A/phase Unipolar Resistance: 2.4 Ohms/phase Unipolar Inductance: 10.8 mH/phase Rotor Inertia: Integral Gearhead: Weight: Storage Temperature: Operating Temperature: 3.87E-02 oz-in-sec2 No 8.4 lbs -40 to 70 °C -20 to 50 °C Insulation Class: Class B (130 ºC) Maximum Radial Load: 28 lbs Maximum Thrust Load: 6.3 lbs Shaft Run Out: 0.002 inch T.I.R. max Radial Play: 0.001 inch max w/ 1.1 lb load End Play: 0.003 inch max w/ 2.2 lb load Perpendicularity: 0.004 inches Concentricity: 0.002 inches Downloads Family Datasheet: Datasheet: HW-099-Errata.pdf StepMotorWiring-8-lead-cabled-striped.pdf http://s3.amazonaws.com/applied-motion-pdf/HW34-696.pdf 2D Drawing: HW34-696D-YAC_RevB.pdf HT34-696_RevE.pdf 3D Drawing: HW34-696.igs HW34-696D-YAC.igs Speed-Torque Curves: StepMtrAppData_HW34-696_RevA.pdf Pricing HW34-696 HW34-696D-YAC Part No. w/ Single Shaft Part No. w/ Encoder 1pc. $403.00 $645.00 25pc. $346.58 $554.70 50pc. $302.25 $483.75 100pc. Request a Quote for 100+ piece pricing.