Fox FSO-25LF 5.0v/3.0v plastic hcmos/ttl oscillator Datasheet

5.0V/3.0V Plastic HCMOS/TTL Oscillator
Model: FSOLF Series
RoHS Compliant / Pb Free
Rev. 9/18/2006
http://www.foxonline.com/need_a_sample.htm
Discontinued
FEATURES
• 5.0V / 3.3V Operation
•
•
•
•
Learn more about:
Part Marking Identification
Tape and Reel Specification
Mechanical Specification
HCMOS/TTL Output
Tri-State Enable/Disable
Extended Temperature Range
Tape and Reel (1,000 pcs. STD)
Internet required
• PART NUMBER SELECTION Learn More - Internet Required
Part Number
Model
Number
259LF-Freq-xxxxx
547LF-Freq-xxxxx
432LF-Freq-xxxxx
433LF-Freq-xxxxx
543LF-Freq-xxxxx
434LF-Freq-xxxxx
FSO-2LF 3
FSO-2RLF
FSO-25LF
FSO-3LF 3
FSO-3RLF
FSO-35LF
Frequency
Operating
Vdd (V) Frequency1
Stability Temperature (ºC) Range (MHz)
5.0 ± 0.5 ±100PPM
-20 ~ +70 1.000 ~ 66.6667
±100PPM
-40 ~ +85 1.000 ~ 66.6667
±50PPM
-20 ~ +70 1.000 ~ 66.6667
3.3 ± 0.3 ±100PPM
-20 ~ +70 1.000 ~ 66.6667
±100PPM
-40 ~ +85 1.000 ~ 66.6667
±50PPM
-20 ~ +70 1.000 ~ 66.6667
• ELECTRICAL CHARACTERISTICS
FSO-2LF Series FSO-3LF Series
MAX (unless otherwise noted)
PARAMETERS
Frequency Range (Fo)
Input Current
(Idd)
1.000 ~ 30.000 MHz
30.000+ ~ 66.6667 MHz
Output Symmetry (50% Vdd)
Rise Time (20% ~ 80% Vdd) (Tr)
1.000 ~ 30.000 MHz
30.000+ ~ 66.6667 MHz
Fall Time (80% ~ 20% Vdd) (Tf)
1.000 ~ 30.000 MHz
30.000+ ~ 66.6667 MHz
Output Voltage
(Vol)
(Voh)
Output Current
(Iol)
(Ioh)
Output Load
(TTL)
(HCMOS)
Start-up Time
(Ts)
1.000 ~ 30.000 MHz
30.000+ ~ 66.6667 MHz
Enable/Disable Time 2
1.000 ~ 66.6667 MHz
23mA
35mA
9mA
20mA
40% ~ 60%
8nS
7nS
6nS
6nS
8nS
7nS
0.4V
4.6V Min
16mA Min
-16mA Min
10TTL
50pF
6nS
6nS
0.4V
2.9V Min
4mA Min
-4mA Min
--30pF
4mS
10mS
100nS
1
Inclusive of 25ºC tolerance, operating temperature range, input voltage change, aging, and load
change.
2
An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
3
The FSO-2LF and FSO-3LF models will also operate over -40ºC ~ +85ºC, but with a
stability of ±200 PPM.
Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
All specifications subject to change without notice.
All dimensions are in millimeters.
• Enable / Disable Function
INH (Pin 1)
OUTPUT (Pin 3)
OPEN 2
ACTIVE
'1' Level Vih ≥ 2.4 V
ACTIVE
'0' Level Vil ≤ 0.6 V
High Z
FOXElectronics
5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com
EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Taiwan Tel: +886.2.22073427 Fax +886.2.22073486 | Japan Tel: +81.3.3374/2079 Fax: +81.3.3374.5221
© 2006 FOX ELECTRONICS | ISO9001:2000 Certified
Similar pages