MTS - LDI 4 Olsen Avenue Edison, NJ 08820 USA Voice (732) 549-9001 Fax: (732) 906-1559 Internet: www.laserdiode.com Email: [email protected] Laser Diode Incorporated ISO 9001:2000 Certified PINAMP Mini-DIL Optical Receivers ¾ 4Mb/s, 52Mb/s, 155Mb/s & 622Mb/s ¾ High sensitivity/Wide dynamic range ¾ High responsivity and low dark current InGaAs pin detector ¾ Single Supply Capable ¾ Hermetic Package ¾ GR-468-CORE Telcordia Qualified Applications Include: Supervisory channel, Long haul transmission networks, Short haul transmission networks, DWDM transponders, SDH/SONET single mode applications, Instrumentation and testing, Data communications. Specifications and Limits Performance @ 25oC (+ / - 5.0 VDC) PARAMETER UNIT 4 Mb/s min typ 52Mb/s max min typ 155 Mb/s max min max min 4 Sensitivity @ 10 (BER)* dBm -50 Overload @ -5 VDC dBm -4 0 0 0 Transfer Gain @ 1310nm V/W 40K 25K 12K 4K Dark Current @ -5 VDC nA 0.5 0.5 0.5 0.5 Responsivity @ -5 VDC A/W -9 -48 -43 155 typ Mb/s Data Rate 52 typ 622 Mb/s -41 -39 max 622 -37 -33 @1310 nm A/W 0.85 0.85 0.85 0.85 @1550 nm A/W 0.9 0.9 0.9 0.9 -31 Ohms 30 60 30 60 30 60 30 60 Supply Voltage V 4.75 5.25 4.75 5.25 4.75 5.25 4.75 5.25 Supply Current mA Output Impedance 30 30 30 30 *Sensitivity is calculated using the noise voltage measured at 25oC at the output of a 3-pole Butterworth filter. Sensitivity is specified as the average optical power in dBm measured at 1310nm and Ta = 25oC for a BER of 10-9. Fiber Specifications Fiber Type Multimode tight buffer Index Profile N/A Nominal Size (um) Cladding Tolerance (um) 900 um Buffer Material Fiber Yield Strength (N) Fiber Bend Radius min. (mm) Graded 0.2 50/125/245/900 125 +/-2.0 Hytrel 10 30 Other fiber types are available. Please contact the Laser Diode Sales Department or your local LDI representative. LDI Document #10-4400-0003 Rev. C 1/12/09 Outline Drawing PIN ASSIGNMENT Pin No. Description 1 -5 Volt Det Bias* 2, 3, 5, 6, 8 Gnd 4 Output 7 +5 Volts *0V Det Bias Capable Outline Dimensions: inches [mm] Detailed package drawing is available upon request Absolute Maximum Ratings Operating Temperature Storage Temperature Positive Supply Voltage Detector Bias Soldering time at 260°C Units LPAD Series °C °C V V secs -40 to +85 -40 to +85 +5.5 -10 10 Part Numbering Diagram Mini-DIL Pinamps 4Mb/s, 52Mb/s, 155Mb/s, 622Mb/s LPAD 0XXX Package Type Data Rate - XX Connector Type R RoHS Designator EXAMPLE: LPAD 0622-FC Mini-DIL Pinamp at 622 Mb/s with FC connector Products can be ordered directly from Laser Diode Inc. or its representatives. For a complete listing of representatives, visit our website at www.laserdiode.com Personal Hazard and Handling Precautions: Handle optical fiber with normal care, avoiding stretch, tension, twist, kink or bend abuse. ESD precautions apply. When ordering, refer to the numbering diagram above. Warranty: Please refer to your product purchase agreement for complete details or check with your Laser Diode sales representative. Notice: Laser Diode Inc. reserves the right to make changes to the products or information contained herein without notice. No liability is assumed as a result of their use or application. LDI Document #10-4400-0003 Rev. C 1/12/09