Murata BLM18GG471SN1J Emifil (inductor type) chip ferrite bead for high-ghz noise blm18g series (0603 size) Datasheet

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for High-GHz Noise
Data Sheet
EMIFILr (Inductor type)
1
Chip Ferrite Bead for High-GHz Noise
BLM18G Series (0603 Size)
■ Dimensions
■ Equivalent Circuit
0.8±0.1
0.35±0.15
1.6±0.1
0.8±0.1
(Resistance element becomes dominant
at high frequencies.)
: Electrode
(in mm)
■ Packaging
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
4000
J
330mm Paper Tape
10000
B
Bulk(Bag)
1000
■ Rated Value (p: packaging code)
Part Number
BLM18GG471SN1p
Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C)
Rated Current
DC Resistance
Operating
Temperature Range
470ohm±25%
1800ohm±30%
200mA
1.0ohm ±0.3ohm
-55 to +125°C
Number of Circuits: 1
■ Impedance-Frequency Characteristics (Main Items)
■ Impedance-Frequency Characteristics
BLM18GG471SN1
2000
2000
1500
Impedance (Ω)
Impedance (Ω)
1500
1000
BLM18GG471SN1
1000
Z
R
500
500
X
0
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
3000
3000
Continued on the following page.
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.3.3
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for High-GHz Noise
Data Sheet
2
Continued from the preceding page.
■ !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.3.3
http://www.murata.com/
Similar pages