FB2012209 (0805) Series – SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE) Rev. A A. Electrical Specifications: P/N FB201209Z100 FB201209Z300 FB201209Z600 FB201209Z800 FB201209Z121 FB201209Z221 FB201209Z301 FB201209Z601 FB201209Z102 FB201209U100 FB201209U110 FB201209U300 FB201209U600 FB201209U800 FB201209U121 FB201209U221 FB201209U301 FB201209U601 FB201209U102 FB201209G070 FB201209G310 FB201209G600 FB201209G800 FB201209G121 FB201209G221 FB201209G301 FB201209G601 FB201209G102 FB201209G152 FB201209G202 FB201209G222 FB201209G252 FB201209G272 FB201209B070 FB201209B300 FB201209B600 FB201209B121 FB201209B221 FB201209B301 FB201209B601 FB201209B102 Impedance (Ω) ±25% @100MHz 10 30 60 80 120 220 300 600 1000 10 11 30 60 80 120 220 300 600 1000 7 31 60 80 120 220 300 600 1000 1500 2000 2200 2500 2700 7 30 60 120 220 300 600 1000 I rms. Max. (mA) 800 800 900 600 600 700 700 500 500 800 900 600 800 800 800 500 500 500 500 800 800 700 500 600 500 500 300 300 400 300 300 300 300 600 600 300 300 300 300 300 300 DCR Max.(Ω) 0.10 0.10 0.10 0.15 0.15 0.20 0.25 0.35 0.50 0.10 0.10 0.10 0.10 0.10 0.10 0.20 0.20 0.30 0.45 0.10 0.10 0.15 0.20 0.20 0.20 0.25 0.45 0.45 0.45 0.60 0.60 0.60 0.65 0.15 0.15 0.20 0.25 0.35 0.40 0.50 0.60 B. Dimensions: mm (Inch) a b c d e f g 2.0 ( 0.079) ± 0.2 (0.008 ) 1.2 ( 0.047) ± 0.2 (0.008 ) 0.9 (0.035) ± 0.2 (0.008 ) 0.5 ( 0.020) ± 0.3 (0.012 ) 3.20 (0.126) 1.50 (0.059) 0.60 (0.024) Typ. Typ. Typ. Series FB201209 Tol. C. Part Number Key: FB 20 12 09 Y XXX IMPEDANCE VALUE MATERIAL CODE: L, U, Z, B or G DIMENSIONS: LENGTH (a) x WIDTH (b) x THICKNESS (c) Frontier Electronics Corp.® http://www.frontierusa.com FAMILY: FB Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 FB2012209 (0805) Series – SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE) Rev. A D. Materials: ITEM Initial Permeability (µiac): Maximum Permeability (µm): Saturation Flux Density at 10 Oe: Curie Temperature(Tc): Volume Resistivity (ρ): Temperature Coefficient: Density: ------- L 25 125 B 45 125 Material Code G 110 250 U 200 450 Z 500 900 Gauss °C 2000 >200 2000 >200 1700 >130 1400 >100 1500 >130 Ω-m 1/10000°C 100000 10 100000 10 100000 13 100000 5 100000 12 g/cm³ 4.8 4.8 4.8 4.8 4.8 UNIT E. Impedance Characteristics of Materials: a. b. c. d. e. f. Z Material is for applications whose blocking regions are near 100 MHz. L Material, an improvement of B Material has sharp impedance characteristic at high frequency. G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low insertion loss at high frequency. Different materials are available for different application range. With one material, higher impedance has sharper characteristics. Please confirm the signal wave form to choose suitable products. C. General Information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. FB201209-yxxx, “FB201209” = P/N, “y” = Material, “xxx” = Impedance. Tolerance: ±25% Small and lightweight surface mounting type. Dimensions are suitable for automatic mounting High-density packaging with a pitch of 2.54 mm (0.1 inch) max.is possible. This series requires less space and have greater EMI suppression effects. Different types with the same shape are available. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability. Applicable to both flow and IR reflow soldering. High impedance covers wide frequency ranges. TI series can be used in high current circuits due to its low DC resistance. Operating temperature: -40°C to +125ºC. Impedance and Current Range: From 7 Ω (800 mA) to 2700 Ω (300 mA) Unspecified values available on request. MSL: Level 1. D. Applications 1. 2. 3. 4. 5. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989