Fairchild HCPL-2503 High speed transistor optocoupler Datasheet

Single-channel: 6N135, 6N136, HCPL-2503, HCPL-4502
Dual-Channel: HCPL-2530, HCPL-2531
High Speed Transistor Optocouplers
Features
Description
■
■
■
■
■
■
The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL2531 optocouplers consist of an AlGaAs LED optically coupled
to a high speed photodetector transistor.
High speed-1 MBit/s
Superior CMR-10 kV/µs
Dual-Channel HCPL-2530/HCPL-2531
Double working voltage-480V RMS
CTR guaranteed 0-70°C
U.L. recognized (File # E90700)
Applications
■
■
■
■
Line receivers
Pulse transformer replacement
Output interface to CMOS-LSTTL-TTL
Wide bandwidth analog coupling
Package
A separate connection for the bias of the photodiode improves
the speed by several orders of magnitude over conventional
phototransistor optocouplers by reducing the base-collector
capacitance of the input transistor.
An internal noise shield provides superior common mode rejection of 10kV/µs. An improved package allows superior insulation
permitting a 480 V working voltage compared to industry standard of 220 V.
Schematic
N/C 1
8 VCC
+ 1
V
8
+ 2
1
7 VB
8 VCC
F1
_
2
7 V01
3
6 V02
VF
_
3
6 VO
_
VF2
N/C 4
8
5 GND
+ 4
5 GND
8
1
1
6N135, 6N136, HCPL-2503, HCPL-4502
HCPL-2530/HCPL-2531
Pin 7 is not connected in
Part Number HCPL-4502
©2005 Fairchild Semiconductor Corporation
1
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
July 2005
Parameter
Symbol
Value
Units
Storage Temperature
TSTG
-55 to +125
°C
Operating Temperature
TOPR
-55 to +100
°C
Lead Solder Temperature
TSOL
260 for 10 sec
°C
IF (avg)
25
mA
IF (pk)
50
mA
IF (trans)
1.0
A
Each Channel
VR
5
V
(6N135/6N136 and HCPL-2503/4502)
(HCPL-2530/2531 ) Each Channel (Note 3)
PD
100
45
mW
Each Channel
IO (avg)
8
mA
Each Channel
IO (pk)
16
mA
(6N135, 6N136 and HCPL-2503 only)
VEBR
5
V
Supply Voltage
VCC
-0.5 to 30
V
Output Voltage
VO
-0.5 to 20
V
EMITTER
DC/Average Forward Input Current
Each Channel (Note 1)
Peak Forward Input Current (50% duty cycle, 1 ms P.W.)
Each Channel (Note 2)
Peak Transient Input Current - (≤1 µs P.W., 300 pps)
Each Channel
Reverse Input Voltage
Input Power Dissipation
DETECTOR
Average Output Current
Peak Output Current
Emitter-Base Reverse Voltage
Base Current
(6N135, 6N136 and HCPL-2503 only)
IB
5
mA
Output power
dissipation
(6N135, 6N136, HCPL-2503, HCPL-4502) (Note 4)
PD
100
mW
35
mW
(HCPL-2530, HCPL-2531) Each Channel
2
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Parameter
EMITTER
Test Conditions
(IF = 16 mA, TA =25°C)
Symbol
Device
Min Typ** Max Unit
VF
Input Forward Voltage
(IF = 16 mA)
Input Reverse Breakdown Voltage
(IR = 10 µA)
BVR
Temperature coefficient of
forward voltage
(IF = 16 mA)
(∆VF/∆TA)
1.45
1.7
V
1.8
5.0
V
-1.6
mV/°C
DETECTOR
Logic high output current
Logic low supply current
(IF = 0 mA, VO = VCC = 5.5 V)
(TA =25°C)
All
0.001
0.5
(IF = 0 mA, VO = VCC = 15 V)
(TA =25°C)
6N135
6N136
HCPL-4502
HCPL-2503
0.005
1
(IF = 0 mA, VO = VCC = 15 V)
All
(IF = 16 mA, VO = Open)
(VCC = 15 V)
IOH
ICCL
(IF1 = IF2 = 16 mA, VO = Open)
(VCC = 15 V)
Logic high supply current
(IF = 0 mA, VO = Open, VCC = 15
V)
(TA =25°C)
ICCH
µA
50
6N135
6N136
HCPL-4502
HCPL-2503
120
200
HCPL-2530
HCPL-2531
200
400
6N135
6N136
HCPL-4502
HCPL-2503
1
(IF = 0 mA, VO = Open)
(VCC = 15 V)
6N135
6N136
HCPL-4502
HCPL-2503
2
(IF = 0 mA, VO = Open)
(VCC = 15 V)
HCPL-2530
HCPL-2531
0.02
µA
µA
4
** All Typicals at TA = 25°C
3
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Electrical Characteristics (TA = 0 to 70°C Unless otherwise specified)
Individual Component Characteristics
Parameter
COUPLED
Test Conditions
Symbol
Device
Min
CTR
6N135
HCPL-2530
7
18
50
%
6N136
HCPL-4502
HCPL-2531
19
27
50
%
HCPL-2503
12
27
%
VOL=0.4V
6N135
5
21
%
VOL=0.5V
HCPL-2530
VOL=0.4V
6N136
HCPL-4502
15
30
%
VOL=0.5V
HCPL-2531
VOL=0.4V
HCPL-2503
9
30
%
(IF = 16 mA, VO = 0.4 V)
(VCC = 4.5 V, TA =25°C)
Current transfer ratio
(Note 5)
(IF = 16 mA, VCC = 4.5 V)
Logic low output voltage
output voltage
(IF = 16 mA, IO = 1.1 mA)
(VCC = 4.5 V, TA =25°C)
(IF = 16 mA, IO = 3 mA)
(VCC = 4.5 V, TA =25°C)
VOL
Typ** Max Unit
6N135
0.18
0.4
HCPL-2530
0.18
0.5
6N136
HCPL-2503
0.25
0.4
HCPL-2531
0.25
0.5
(IF = 16 mA, IO = 0.8 mA)
(VCC = 4.5 V)
6N135
HCPL-2530
0.5
(IF = 16 mA, IO = 2.4 mA)
(VCC = 4.5 V)
HCPL-4502
HCPL-2531
0.5
V
** All Typicals at TA = 25°C
4
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Transfer Characteristics (TA = 0 to 70°C Unless otherwise specified)
Parameter
Propagation delay
time to logic low
Propagation delay
time to logic high
Test Conditions
Symbol
Device
6N135
HCPL-2530
0.45
1.5
µs
TPHL
(RL = 1.9 kΩ, IF = 16 mA) (Note 7) (Fig. 7)
TA = 25°C
6N136
HCPL-4502
HCPL-2503
HCPL-2531
0.45
0.8
µs
(RL = 4.1 kΩ, IF = 16 mA) (Note 6) (Fig. 7)
6N135
HCPL-2530
2.0
µs
(RL = 1.9 kΩ, IF = 16 mA) (Note 7) (Fig. 7)
6N136
HCPL-4502
HCPL-2503
HCPL-2531
1.0
µs
TA = 25°C, (RL = 4.1 kΩ, IF = 16 mA) (Note 6) (Fig. 7)
TA = 25°C, (RL = 4.1 kΩ, IF = 16 mA) (Note 6) (Fig. 7)
6N135
HCPL-2530
0.5
1.5
µs
(RL = 1.9 kΩ, IF = 16 mA) (Note 7) (Fig. 7)
TA = 25°C
6N136
HCPL-4502
HCPL-2503
HCPL-2531
0.3
0.8
µs
(RL = 4.1 kΩ, IF = 16 mA) (Note 6) (Fig. 7)
6N135
HCPL-2530
2.0
µs
(RL = 1.9 kΩ, IF = 16 mA) (Note 7) (Fig. 7)
6N136
HCPL-4502
HCPL-2503
HCPL-2531
1.0
µs
Common mode
transient
immunity at
logic high
(IF = 0 mA, VCM = 10 VP-P, RL = 4.1 kΩ)
(Note 8) (Fig. 8) TA = 25°C
Common mode
transient
immunity at
logic low
(IF = 16 mA, VCM = 10 VP-P, RL = 4.1 kΩ)
(Note 8) (Fig. 8) TA = 25°C
TPLH
Min Typ** Max Unit
|CMH|
(IF = 0 mA, VCM = 10 VP-P)
TA = 25°C, (RL = 1.9 kΩ)
(Note 8) (Fig. 8)
(IF = 16 mA, VCM = 10 VP-P)
(RL = 1.9 kΩ)
(Note 8) (Fig. 8)
|CML|
6N135
HCPL-2530
10,000
V/µs
6N136
HCPL-4502
HCPL-2503
HCPL-2531
10,000
V/µs
6N135
HCPL-2530
10,000
V/µs
6N136
HCPL-4502
HCPL-2503
HCPL-2531
10,000
V/µs
** All Typicals at TA = 25°C
5
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Switching Characteristics (TA = 0 to 70°C unless otherwise specified., VCC = 5 V)
Characteristics
Input-output
insulation leakage current
Withstand insulation test voltage
Resistance (input to output)
Capacitance (input to output)
DC Current gain
Input-Input
Insulation leakage current
Input-Input Resistance
Input-Input Capacitance
Test Conditions
(Relative humidity = 45%)
(TA = 25°C, t = 5 s)
(VI-O = 3000 VDC)
(Note 9)
Symbol
Min
Typ**
II-O
Max
Unit
1.0
µA
(RH ≤ 50%, TA = 25°C)
(Note 9) ( t = 1 min.)
VISO
(Note 9) (VI-O = 500 VDC)
RI-O
1012
Ω
(Note 9) (f = 1 MHz)
CI-O
0.6
pF
(IO = 3 mA, VO = 5 V)
2500
VRMS
HFE
150
(RH ≤ 45%, VI-I = 500 VDC) (Note 10)
t = 5 s, (HCPL-2530/2531 only)
II-I
0.005
µA
(VI-I = 500 VDC) (Note 10)
(HCPL-2530/2531 only)
RI-I
1011
Ω
(f = 1 MHz) (Note 10)
(HCPL-2530/2531 only)
CI-I
0.03
pF
Notes
1. Derate linearly above 70°C free-air temperature at a rate of 0.8 mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6 mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%.
6. The 4.1 kΩ load represents 1 LSTTL unit load of 0.36 mA and 6.1kΩ pull-up resistor.
7. The 1.9 kΩ load represents 1 TTL unit load of 1.6 mA and 5.6 kΩ pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V). Common mode transient
immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal,
VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V).
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
I
6
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified)
1.0
1.0
NORMALIZED CTR
NORMALIZED CTR
Fig. 2 Normalized CTR vs. Temperature
1.2
0.8
0.6
0.4
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
IF = 16 mA
0.2
0.0
0.1
1
0.8
0.6
0.4
10
0.0
-60
100
-40
-20
IF - FORWARD CURRENT (mA)
20
40
60
80
100
80
100
Fig. 4 Logic High Output Current
vs. Temperature
1000
TA = 25°C
VCC = 5 V
14
IOH - LOGIC HIGH OUTPUT CURRENT (nA)
16
IO - OUTPUT CURRENT (mA)
0
TA - TEMPERATURE (°C)
Fig. 3 Output Current vs. Output Voltage
IF = 40 mA
IF = 35 mA
12
IF = 30 mA
10
IF = 25 mA
8
IF = 20 mA
6
IF = 15 mA
4
IF = 10 mA
2
IF = 5 mA
0
2
4
6
8
10
12
14
16
18
IF = 0 mA
VCC = 5 V
VO = 5 V
100
10
1
0.1
-60
0
20
-40
-20
20
40
60
Fig. 6 Propagation Delay vs. Load Resistance
Fig. 5 Propagation Delay vs. Temperature
800
10000
700
RL = 4.1 K (TPLH)
TP - PROPAGATION DELAY (ns)
600
0
TA - TEMPERATURE (°C)
VO - OUTPUT VOLTAGE (V)
Tp - PROPAGATION DELAY (ns)
IF = 16mA
VCC = 5 V
VO = 0.4 V
Normalized to:
TA = 25°C
0.2
RL = 4.1 K (TPLH)
500
400
300
200
RL = 1.9 K (TPHL)
IF = 16 mA
VCC = 5 V
RL = 1.9 K (TPLH)
100
IF - 16 mA (TPHL)
IF - 10 mA (TPHL)
1000
IF - 16 mA (TPLH)
IF - 10 mA (TPLH)
0
-60
-40
-20
0
20
40
TA - TEMPERATURE (°C)
60
80
100
VCC = 5 V
TA = 25°C
100
1
10
RL = LOAD RESISTANCE (kΩ)
7
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Fig. 1 Normalized CTR vs. Forward Current
1.2
Noise
Shield
8
+
2
7
VF
-
3
6
VCC
VB
+5 V
4
5
IF
MONITOR
1
8
VCC
+5 V
RL
VF1
-
7
2
V01
VO
C L = 1.5 µF
3
6
4
5
VF2
+
Rm
C L = 1.5 µF
GND
Noise
Shield
+
-
VO
0.1 µF
Rm
IF
10% DUTY CYCLE
I/f < 100µS
RL
VO
I F Monitor
Pulse
Generator
tr = 5ns
Z O = 50 Ω
V02
0.1 µF
GND
Test Circuit for HCPL-2530 and HCPL-2531
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502
IF
0
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 7 Switching Time Test Circuit
IF
1
Noise
Shield
8
+
2
A
B
7
VCC
+
+5 V
IF
VB
VF1
-
RL
Noise
Shield
1
8
VCC
+5 V
RL
2
7
3
6
4
5
V01
VO
A
VF
-
3
6
VO
B
VO
VFF
0.1 µF
VFF
5
4
+
GND
VF2
+
-
V02
0.1 µF
GND
VCM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502
Test Circuit for HCPL-2530 and HCPL-2531
VCM 10 V
0V
90%
90%
10%
tr
VO
10%
tf
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 8 Common Mode Immunity Test Circuit
8
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Pulse
Generator I
F
tr = 5ns
Z O = 50 Ω
10% D.C.
I/f < 100µs
1
Package Dimensions (Surface Mount)
0.390 (9.91)
0.370 (9.40)
PIN 1
ID.
4
3
2
4
3
2
1
0.270 (6.86)
0.250 (6.35)
5
6
PIN 1
ID.
1
7
0.270 (6.86)
0.250 (6.35)
8
5
6
7
8
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.070 (1.78)
0.045 (1.14)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51)
MIN
0.020 (0.51) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0.315 (8.00)
MIN
0.100 (2.54)
TYP
0.300 (7.62)
TYP
Package Dimensions (0.4"Lead Spacing)
3
2
0.016 (0.41)
0.008 (0.20)
0.045 [1.14]
0.022 (0.56)
0.016 (0.41)
15° MAX
0.405 (10.30)
MIN
Lead Coplanarity : 0.004 (0.10) MAX
4
0.300 (7.62)
TYP
Recommended Pad Layout for
Surface Mount Leadform
PIN 1
ID.
1
0.070 (1.78)
0.270 (6.86)
0.250 (6.35)
0.060 (1.52)
5
6
7
8
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.100 (2.54)
0.295 (7.49)
0.070 (1.78)
0.045 (1.14)
0.415 (10.54)
0.004 (0.10) MIN
0.200 (5.08)
0.140 (3.55)
0.030 (0.76)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0° to 15°
0.400 (10.16)
TYP
NOTE
All dimensions are in inches (millimeters)
9
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Package Dimensions (Through Hole)
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Ordering Information
Option
Example Part Number
Description
S
6N135S
SD
6N135SD
Surface Mount; Tape and reel
Surface Mount Lead Bend
W
6N135W
0.4" Lead Spacing
V
6N135V
VDE0884
TV
6N135TV
VDE0884; 0.4” lead spacing
SV
6N135SV
VDE0884; surface mount
SDV
6N135SDV
VDE0884; surface mount; tape and reel
Marking Information
1
V
3
2503
2
XX YY T1
6
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
10
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
12.0 ±0.1
4.0 ±0.1
4.90 ±0.20
Ø1.55 ±0.05
4.0 ±0.1
0.30 ±0.05
1.75 ±0.10
7.5 ±0.1
16.0 ±0.3
13.2 ±0.2
10.30 ±0.20
Ø1.6 ±0.1
10.30 ±0.20
0.1 MAX
User Direction of Feed
Reflow Profile
Temperature (°C)
300
215 C, 10–30 s
250
225 C peak
200
150
Time above 183C, 60–150 sec
100
50
Ramp up = 3C/sec
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 225C (package surface temperature)
• Time of temperature higher than 183C for 60–150 seconds
• One time soldering reflow is recommended
11
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
Carrier Tape Specifications
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
FAST
ActiveArray™
FASTr™
Bottomless™
FPS™
Build it Now™
FRFET™
CoolFET™
GlobalOptoisolator™
CROSSVOLT™ GTO™
DOME™
HiSeC™
EcoSPARK™
I2C™
E2CMOS™
i-Lo™
EnSigna™
ImpliedDisconnect™
FACT™
IntelliMAX™
FACT Quiet Series™
Across the board. Around the world.™
The Power Franchise
Programmable Active Droop™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench
QFET
SuperSOT™-8
SyncFET™
TinyLogic
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
SILENT SWITCHER
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
TINYOPTO™
TruTranslation™
UHC™
UltraFET
UniFET™
VCX™
Wire™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component is any component of a life
1. Life support devices or systems are devices or
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I16
12
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.3
www.fairchildsemi.com
Single-channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers
TRADEMARKS