Order this document by MRF166/D SEMICONDUCTOR TECHNICAL DATA The RF MOSFET Line N–Channel Enhancement Mode MOSFETs Designed primarily for wideband large–signal output and driver from 30 – 500 MHz. • Low Crss — 4.5 pF @ VDS = 28 V 20 W, 500 MHz MOSFET BROADBAND RF POWER FETs • MRF166C — Typical Performance at 400 MHz, 28 Vdc Output Power = 20 W Gain = 17 dB Efficiency = 55% • Optional 4–Lead Flange Package (MRF166) • Replacement for Industry Standards such as MRF136, DV2820, BLF244, SD1902, and ST1001 • 100% Tested for Load Mismatch at all Phase Angles with 30:1 VSWR • Facilitates Manual Gain Control, ALC and Modulation Techniques • Excellent Thermal Stability, Ideally Suited for Class A Operation • Circuit board photomaster available upon request by contacting RF Tactical Marketing in Phoenix, AZ. CASE 211–07, STYLE 2 D G S CASE 319–07, STYLE 3 MAXIMUM RATINGS Rating Symbol Value Unit Drain–Gate Voltage VDSS 65 Vdc Drain–Gate Voltage (RGS = 1.0 MΩ) VDGR 65 Vdc VGS ± 40 Adc Drain Current — Continuous ID 4.0 Adc Total Device Dissipation @ TC = 25°C Derate Above 25°C PD 70 0.4 Watts W/°C Storage Temperature Range Tstg – 65 to 150 °C TJ 200 °C Symbol Max Unit RθJC 2.5 °C/W Gate–Source Voltage Operating Junction Temperature THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case NOTE — CAUTION — MOS devices are susceptible to damage from electrostatic charge. Reasonable precautions in handling and packaging MOS devices should be observed. REV 6 RF DEVICE DATA MOTOROLA Motorola, Inc. 1994 MRF166 MRF166C 1 ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Drain–Source Breakdown Voltage (VGS = 0 V, ID = 5.0 mA) V(BR)DSS 65 — — V Zero Gate Voltage Drain Current (VDS = 28 V, VGS = 0 V) IDSS — — 1.0 mA Gate–Source Leakage Current (VGS = 40 V, VDS = 0 V) IGSS — — 1.0 µA Gate Threshold Voltage (VDS = 10 V, ID = 25 mA) VGS(th) 1.0 3.0 6.0 V Forward Transconductance (VDS = 10 V, ID = 1.5 A) gfs 600 800 — mhos Input Capacitance (VDS = 28 V, VGS = 0 V, f = 1.0 MHz) Ciss — 30 — pF Output Capacitance (VDS = 28 V, VGS = 0 V, f = 1.0 MHz) Coss — 35 — pF Reverse Transfer Capacitance (VDS = 28 V, VGS = 0 V, f = 1.0 MHz) Crss — 4.5 — pF NF — 2.5 — dB Common Source Power Gain (VDD = 28 V, Pout = 20 W, f = 400 MHz, IDQ = 100 mA) Gps 14 17 — dB Drain Efficiency (VDD = 28 V, Pout = 20 W, f = 400 MHz, IDQ = 100 mA) η 50 55 — % Electrical Ruggedness (VDD = 28 V, Pout = 20 W, f = 400 MHz, IDQ = 100 mA, Load VSWR 30:1 at All Phase Angles) ψ OFF CHARACTERISTICS ON CHARACTERISTICS DYNAMIC CHARACTERISTICS FUNCTIONAL CHARACTERISTICS Noise Figure (VDD = 28 V, f = 30 MHz, IDQ = 50 mA) MRF166C No Degradation in Output Power MRF166 Common Source Power Gain (VDD = 28 V, Pout = 20 W, f = 150 MHz, IDQ = 25 mA) Gps 15 19 — dB Drain Efficiency (VDD = 28 V, Pout = 20 W, f = 150 MHz, IDQ = 25 mA) η 55 65 — % Electrical Ruggedness (VDD = 28 V, Pout = 20 W, f = 150 MHz, IDQ = 25 mA, Load VSWR 30:1 at All Phase Angles) ψ Series Equivalent Input Impedance (VDD = 28 V, Pout = 20 W, f = 150 MHz, IDQ = 25 mA) Zin — 3.99 – j12.2 — Ohms Series Equivalent Output Impedance (VDD = 28 V, Pout = 20 W, f = 150 MHz, IDQ = 25 mA) Zout — 14.15 – j6.51 — Ohms MRF166 MRF166C 2 No Degradation in Output Power MOTOROLA RF DEVICE DATA R3 C4 C13 + VDD = 28 V C11 + + C8 D1 – RFC1 C10 R2 – Vdc C12 – RFC2 R4 C9 Z5 Z6 Z7 RF OUTPUT R1 C7 RF INPUT Z1 Z2 L1 Z3 L2 C5 Z4 C1 D.U.T. C3 C2 C1, C7 — 270 pF Chip Capacitor C2, C6 — Johanson Trimmer Capacitor, 2 – 20 pF C3 — 21 pF Mini Unelco C4, C8, C9 — 0.01 µF C5 — 18 pF Mini Unelco C10, C11 — 680 pF Feed Through C12, C13 — 50 µF, 50 V D1 — 1N5925A Motorola Zener Board Material — Teflon fiberglass 2 oz. Copper clad both sides, εr = 2.55 0.060″ Dielectric Thickness C6 L1 — #18 AWG, 2 Turns, 0.25″ ID 0.15″ Wide L2 — #18 AWG Hairpin 0.7″ long, bend into hairpin RFC1 — Ferroxcube VK200–19/4B RFC2 — 18 Turns #18 AWG Enameled, 0.3″ ID R1 — 220 Ω 1/2 Watt R2 — 1.8 kΩ 1/4 Watt R3 — 10 kΩ, 10 Turns Bourns R4 — 10 k 1/4 Watt Z1 — Microstrip Line 0.150″ wide, 0.420″ long Z2 — Microstrip Line 0.150″ wide, 0.350″ long Z3 — Microstrip Line 0.150″ wide, 0.350″ long Z4 — Microstrip Line 0.150″ wide, 0.450″ long Z5 — Microstrip Line 0.150″ wide, 1.1″ long Z6 — Microstrip Line 0.150″ wide, 0.650″ long Z7 — Microstrip Line 0.150″ wide, 0.200″ long Figure 1. MRF166C 400 MHz Test Circuit R1 C7 RFC1 C10 R2 + C8 C12 C9 D1 – VDD = 28 V C11 + – + C13 Vdc – RFC2 R4 C6 L2 RF OUTPUT L3 R3 C5 RF INPUT L1 C3 C1 C4 D.U.T. C2 C1, C2 — 406 ARCO C3 — 39 pF ATC 100 Mil Chip Cap C4 — 403 ARCO C5 — 470 pF ATC 100 Mil Chip Cap C6, C7, C9, C13 — 0.01 µF C8, C12 — 50 µF, 50 V C10, C11 — 680 pF Feed Through D1 — 1N5925A Motorola Zener L1 — #20 AWG 2 Turns, 0.235″ ID, 0.10″ OD L2 — #18 AWG 2 Turns, 0.225″ ID, 0.22″ OD L3 — #18 AWG 2 Turns, 0.325″ ID, 0.13″ OD RFC1 — Ferroxcube VK200–19/4B RFC2 — 18 Turns #18 AWG Enameled, 0.3″ ID R1 — 10 kΩ, 10 Turn Bourns R2 — 1.8 kΩ 1/4 Watt R3 — 120 Ω 1/2 Watt R4 — 10 kΩ 1/4 Watt Board Material — 0.062″ G10, 2 oz Cu Clad Double Sided Figure 2. MRF166 150 MHz Test Circuit MOTOROLA RF DEVICE DATA MRF166 MRF166C 3 TYPICAL CHARACTERISTICS 10 50 Coss 20 Ciss I D, DRAIN CURRENT (AMPS) C, CAPACITANCE (pF) 100 10 Crss 5 VGS = 0 V f = 1 MHz 2 1 0 5 10 15 20 VDS, DRAIN–SOURCE VOLTAGE (VOLTS) TC = 25°C 1 0.1 25 0 10 VDS, DRAIN–SOURCE VOLTAGE (VOLTS) Figure 3. Capacitance versus Drain–Source Voltage 100 Figure 4. DC Safe Operating Area MRF166 32 f = 150 MHz 30 Po, OUTPUT POWER (WATTS) Po, OUTPUT POWER (WATTS) 35 25 20 15 VDS = 28 V IDQ = 25 mA 10 5 0 f = 150 MHz IDQ = 25 mA 28 Pin = 0.6 W 24 0.3 W 20 16 12 0.1 W 8 4 0 0.1 0.2 0.3 0.4 0.5 0.6 Pin, INPUT POWER (WATTS) 0.7 Figure 5. Output Power versus Input Power 0.8 0 12 14 16 18 20 22 24 VDS, DRAIN–SOURCE VOLTAGE (VOLTS) 26 28 Figure 6. Output Power versus Voltage Po, OUTPUT POWER (WATTS) 16 14 f = 150 MHz 12 10 8 6 4 VDS = 13.5 V IDQ = 25 mA 2 0 0 0.1 0.2 0.3 0.4 0.5 0.6 Pin, INPUT POWER (WATTS) 0.7 0.8 Figure 7. Output Power versus Input Power MRF166 MRF166C 4 MOTOROLA RF DEVICE DATA 35 16 30 14 Po, OUTPUT POWER (WATTS) Po, OUTPUT POWER (WATTS) MRF166C f = 400 MHz 25 20 500 MHz 15 VDS = 28 V IDQ = 100 mA 10 5 0 12 10 f = 400 MHz 8 6 4 VDS = 13.5 V IDQ = 100 mA 2 0 0.1 0.2 0.3 0.4 0.5 0.6 Pin, INPUT POWER (WATTS) 0.8 0.7 Figure 8. Output Power versus Input Power 0 0 0.1 0.2 0.3 0.4 0.5 0.6 Pin, INPUT POWER (WATTS) 0.7 0.8 Figure 9. Output Power versus Input Power 32 f = 400 MHz IDQ = 100 mA Po, OUTPUT POWER (WATTS) 28 Pin = 0.8 W 24 20 0.4 W 16 12 0.2 W 8 4 0 12 14 16 18 20 22 24 VDS, DRAIN–SOURCE (VOLTS) 26 28 Figure 10. Output Power versus Voltage 400 f = 500 MHz f = 500 MHz 400 200 ZOL* 200 Zin 100 100 Zo = 50 Ω VDD = 28 V, IDQ = 100 mA f MHz Zin OHMS 100 200 400 500 11.0 – j21.0 4.20 – j12.6 1.90 – j5.80 1.50 – j4.10 ZOL* OHMS (Pout = 20 W) 8.50 – j10.0 6.00 – j9.00 4.50 – j6.70 4.20 – j5.40 ZOL* = Conjugate of the optimum load impedance into which the device output operates at a given output power, voltage and frequency. Figure 11. Series Equivalent Input and Output Impedance MOTOROLA RF DEVICE DATA MRF166 MRF166C 5 MRF166 MRF166C 6 MOTOROLA RF DEVICE DATA PACKAGE DIMENSIONS A U NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. M Q M 1 DIM A B C D E H J K M Q R S U 4 B R 2 S 3 D K STYLE 2: PIN 1. 2. 3. 4. J C H E INCHES MIN MAX 0.960 0.990 0.370 0.390 0.229 0.281 0.215 0.235 0.085 0.105 0.150 0.108 0.004 0.006 0.395 0.405 40 _ 50 _ 0.113 0.130 0.245 0.255 0.790 0.810 0.720 0.730 MILLIMETERS MIN MAX 24.39 25.14 9.40 9.90 5.82 7.13 5.47 5.96 2.16 2.66 3.81 4.57 0.11 0.15 10.04 10.28 40 _ 50 _ 2.88 3.30 6.23 6.47 20.07 20.57 18.29 18.54 SOURCE GATE SOURCE DRAIN SEATING PLANE CASE 211–07 ISSUE N Q 2 PL -AL IDENTIFICATION NOTCH 6 5 0.15 (0.006) M T A M N M NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 4 -N1 2 3 K F D 2 PL 0.38 (0.015) M B 0.38 (0.015) T A M N M T A M M N M DIM A B C D E F H J K L N Q INCHES MIN MAX 0.965 0.985 0.355 0.375 0.230 0.260 0.115 0.125 0.102 0.114 0.075 0.085 0.160 0.170 0.004 0.006 0.090 0.110 0.725 BSC 0.225 0.241 0.125 0.135 MILLIMETER MIN MAX 24.52 25.01 9.02 9.52 5.85 6.60 2.93 3.17 2.59 2.90 1.91 2.15 4.07 4.31 0.11 0.15 2.29 2.79 18.42 BSC 5.72 6.12 3.18 3.42 J H C E -T- SEATING PLANE STYLE 3: PIN 1. 2. 3. 4. 5. 6. SOURCE (COMMON) GATE (INPUT) SOURCE (COMMON) SOURCE (COMMON) DRAIN (OUTPUT) SOURCE (COMMON) CASE 319–07 ISSUE M MOTOROLA RF DEVICE DATA MRF166 MRF166C 7 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. MRF166 MRF166C 8 ◊ *MRF166/D* MRF166/D MOTOROLA RF DEVICE DATA