TDK MLG1005S6N2HT000 Inductors for high frequency circuits multilayer ceramic Datasheet

I
N
D
U
C
T
O
R
S
May 2016
Inductors for High Frequency Circuits
Multilayer Ceramic
MLG Series
MLG1005S Type
MLG1005S
1005 [0402 inch]*
* Dimensions Code JIS[EIA]
(2/16)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(3/16)
I
N
D
U
C
T
O
R
S
Inductors for High Frequency Circuits
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Multilayer Ceramic
Overview of MLG1005S Type
FEATURES
Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for Highfrequency.
APPLICATION
Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners
and other high frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MLG
Series name
1005
S
L×W×H Dimensions
(mm)
1005
1.0×0.5×0.5
Product internal
code
S
0N3
B
Inductance
(nH)
1N1
1.1
11N
11
R10
100
Inductance
tolerance
B
±0.1nH
C
±0.2nH
S
±0.3nH
H
±3%
J
±5%
T
000
Packaging style
Internal code
T
Taping
000
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Operating
Storage
Type
temperature
temperature
(pieces/reel)
（°C）
（°C）
MLG1005S
–55 to +125
–55 to +125
10000
The Storage temperature range is for after the circuit board is mounted.
Individual weight
（mg）
1
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(4/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s max.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(5/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
0.50±0.05
SHAPE & DIMENSIONS
0.25±0.10
0.25±0.10
0.50±0.05
1.00±0.05
Dimensions in mm
0.5
RECOMMENDED LAND PATTERN
0.5
0.4
0.5
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(6/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.5
1.5
1.5
1.6
1.6
1.6
1.8
1.8
1.8
2.0
2.0
2.0
2.2
2.2
2.2
2.4
2.4
2.4
2.7
2.7
2.7
Tolerance
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(GHz)min.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
8.0
8.0
8.0
8.0
8.0
8.0
7.5
7.5
7.5
8.0
8.0
8.0
7.5
7.5
7.5
7.0
7.0
7.0
7.0
7.0
7.0
6.0
6.0
6.0
(: )max.
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.12
0.12
0.12
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
(mA)max.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
900
900
900
900
900
900
900
900
900
800
800
800
800
800
800
MLG1005S0N3BT000
MLG1005S0N3CT000
MLG1005S0N4BT000
MLG1005S0N4CT000
MLG1005S0N5BT000
MLG1005S0N5CT000
MLG1005S0N6BT000
MLG1005S0N6CT000
MLG1005S0N7BT000
MLG1005S0N7CT000
MLG1005S0N8BT000
MLG1005S0N8CT000
MLG1005S0N9BT000
MLG1005S0N9CT000
MLG1005S1N0BT000
MLG1005S1N0CT000
MLG1005S1N0ST000
MLG1005S1N1BT000
MLG1005S1N1CT000
MLG1005S1N1ST000
MLG1005S1N2BT000
MLG1005S1N2CT000
MLG1005S1N2ST000
MLG1005S1N3BT000
MLG1005S1N3CT000
MLG1005S1N3ST000
MLG1005S1N5BT000
MLG1005S1N5CT000
MLG1005S1N5ST000
MLG1005S1N6BT000
MLG1005S1N6CT000
MLG1005S1N6ST000
MLG1005S1N8BT000
MLG1005S1N8CT000
MLG1005S1N8ST000
MLG1005S2N0BT000
MLG1005S2N0CT000
MLG1005S2N0ST000
MLG1005S2N2BT000
MLG1005S2N2CT000
MLG1005S2N2ST000
MLG1005S2N4BT000
MLG1005S2N4CT000
MLG1005S2N4ST000
MLG1005S2N7BT000
MLG1005S2N7CT000
MLG1005S2N7ST000
(GHz)typ.
20up
20up
20up
20up
20up
20up
20up
20up
18.7
18.7
16.4
16.4
17.7
17.7
13.8
13.8
13.8
19.3
19.3
19.3
11.6
11.6
11.6
11.7
11.7
11.7
9.6
9.6
9.6
9.4
9.4
9.4
10.3
10.3
10.3
9.3
9.3
9.3
8.6
8.6
8.6
8.2
8.2
8.2
7.3
7.3
7.3
(: )typ.
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.04
0.04
0.04
0.04
0.04
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.06
0.06
0.06
0.05
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
Please contact us for ±2% inductance tolerance (code G) products.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B +16193A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Keysight Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(7/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
3.0
3.0
3.0
3.3
3.3
3.3
3.6
3.6
3.6
3.9
3.9
3.9
4.3
4.3
4.7
4.7
5.1
5.1
5.6
5.6
6.2
6.2
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10
10
11
11
12
12
13
13
15
15
16
16
18
18
20
20
22
22
Tolerance
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.2nH
±0.3nH
±0.2nH
±0.3nH
±0.2nH
±0.3nH
±0.2nH
±0.3nH
±0.3nH
±3%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(GHz)min.
5.5
5.5
5.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
4.5
4.5
4.5
4.5
4.0
4.0
4.0
4.0
4.0
4.0
3.5
3.5
3.0
3.0
3.0
3.0
3.0
3.0
2.5
2.5
2.5
2.5
2.5
2.5
2.4
2.4
2.2
2.2
2.1
2.1
2.0
2.0
1.9
1.9
1.7
1.7
(: )max.
0.2
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.30
0.30
0.35
0.35
0.40
0.40
0.40
0.40
0.50
0.50
0.55
0.55
0.55
0.55
0.60
0.60
0.60
0.60
0.70
0.70
(mA)max.
800
800
800
800
800
800
700
700
700
700
700
700
700
700
700
700
600
600
600
600
600
600
600
600
500
500
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
350
350
350
350
350
350
MLG1005S3N0BT000
MLG1005S3N0CT000
MLG1005S3N0ST000
MLG1005S3N3BT000
MLG1005S3N3CT000
MLG1005S3N3ST000
MLG1005S3N6BT000
MLG1005S3N6CT000
MLG1005S3N6ST000
MLG1005S3N9BT000
MLG1005S3N9CT000
MLG1005S3N9ST000
MLG1005S4N3CT000
MLG1005S4N3ST000
MLG1005S4N7CT000
MLG1005S4N7ST000
MLG1005S5N1CT000
MLG1005S5N1ST000
MLG1005S5N6CT000
MLG1005S5N6ST000
MLG1005S6N2ST000
MLG1005S6N2HT000
MLG1005S6N8HT000
MLG1005S6N8JT000
MLG1005S7N5HT000
MLG1005S7N5JT000
MLG1005S8N2HT000
MLG1005S8N2JT000
MLG1005S9N1HT000
MLG1005S9N1JT000
MLG1005S10NHT000
MLG1005S10NJT000
MLG1005S11NHT000
MLG1005S11NJT000
MLG1005S12NHT000
MLG1005S12NJT000
MLG1005S13NHT000
MLG1005S13NJT000
MLG1005S15NHT000
MLG1005S15NJT000
MLG1005S16NHT000
MLG1005S16NJT000
MLG1005S18NHT000
MLG1005S18NJT000
MLG1005S20NHT000
MLG1005S20NJT000
MLG1005S22NHT000
MLG1005S22NJT000
(GHz)typ.
6.8
6.8
6.8
6.1
6.1
6.1
6.7
6.7
6.7
6.5
6.5
6.5
6.0
6.0
5.4
5.4
5.0
5.0
5.3
5.3
4.7
4.7
4.4
4.4
4.1
4.1
4.0
4.0
3.8
3.8
3.4
3.4
3.5
3.5
3.0
3.0
2.9
2.9
2.8
2.8
2.7
2.7
2.5
2.5
2.4
2.4
2.2
2.2
(: )typ.
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.13
0.13
0.14
0.14
0.16
0.16
0.15
0.15
0.15
0.15
0.19
0.19
0.20
0.20
0.22
0.22
0.28
0.28
0.25
0.25
0.26
0.26
0.35
0.35
0.32
0.32
0.40
0.40
0.38
0.38
0.46
0.46
Please contact us for ±2% inductance tolerance (code G) products.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B +16193A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Keysight Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(8/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
24
24
27
27
30
30
33
33
36
36
39
39
43
43
47
47
51
51
56
56
62
62
68
68
75
75
82
82
91
91
100
100
110
110
120
120
130
130
150
150
160
160
180
180
200
200
220
220
Tolerance
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(GHz)min.
1.7
1.7
1.6
1.6
1.5
1.5
1.4
1.4
1.3
1.3
1.2
1.2
1.2
1.2
1.1
1.1
1.1
1.1
1.0
1.0
1.0
1.0
0.8
0.8
0.75
0.75
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.6
0.6
0.6
0.6
0.55
0.55
0.5
0.5
0.5
0.5
0.42
0.42
0.45
0.45
(: )max.
0.70
0.70
0.80
0.80
0.80
0.80
0.90
0.90
1.00
1.00
1.00
1.00
1.10
1.10
1.20
1.20
1.20
1.20
1.30
1.30
1.40
1.40
1.50
1.50
1.50
1.50
1.60
1.60
1.80
1.80
2.00
2.00
2.20
2.20
2.20
2.20
2.50
2.50
3.50
3.50
3.80
3.80
3.80
3.80
4.20
4.20
4.20
4.20
(mA)max.
350
350
300
300
300
300
300
300
250
250
250
250
250
250
250
250
250
250
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
100
100
100
100
MLG1005S24NHT000
MLG1005S24NJT000
MLG1005S27NHT000
MLG1005S27NJT000
MLG1005S30NHT000
MLG1005S30NJT000
MLG1005S33NHT000
MLG1005S33NJT000
MLG1005S36NHT000
MLG1005S36NJT000
MLG1005S39NHT000
MLG1005S39NJT000
MLG1005S43NHT000
MLG1005S43NJT000
MLG1005S47NHT000
MLG1005S47NJT000
MLG1005S51NHT000
MLG1005S51NJT000
MLG1005S56NHT000
MLG1005S56NJT000
MLG1005S62NHT000
MLG1005S62NJT000
MLG1005S68NHT000
MLG1005S68NJT000
MLG1005S75NHT000
MLG1005S75NJT000
MLG1005S82NHT000
MLG1005S82NJT000
MLG1005S91NHT000
MLG1005S91NJT000
MLG1005SR10HT000
MLG1005SR10JT000
MLG1005SR11HT000
MLG1005SR11JT000
MLG1005SR12HT000
MLG1005SR12JT000
MLG1005SR13HT000
MLG1005SR13JT000
MLG1005SR15HT000
MLG1005SR15JT000
MLG1005SR16HT000
MLG1005SR16JT000
MLG1005SR18HT000
MLG1005SR18JT000
MLG1005SR20HT000
MLG1005SR20JT000
MLG1005SR22HT000
MLG1005SR22JT000
(GHz)typ.
2.1
2.1
2.0
2.0
1.9
1.9
1.8
1.8
1.7
1.7
1.6
1.6
1.6
1.6
1.4
1.4
1.5
1.5
1.3
1.3
1.3
1.3
1.1
1.1
1.1
1.1
1.0
1.0
0.9
0.9
0.9
0.9
0.9
0.9
0.8
0.8
0.8
0.8
0.7
0.7
0.6
0.6
0.6
0.6
0.5
0.5
0.5
0.5
(: )typ.
0.43
0.43
0.53
0.53
0.50
0.50
0.59
0.59
0.62
0.62
0.65
0.65
0.67
0.67
0.75
0.75
0.72
0.72
0.83
0.83
0.85
0.85
0.87
0.87
0.93
0.93
1.01
1.01
1.14
1.14
1.37
1.37
1.48
1.48
1.48
1.48
1.68
1.68
2.44
2.44
2.74
2.74
2.88
2.88
3.15
3.15
3.02
3.02
Please contact us for ±2% inductance tolerance (code G) products.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B +16193A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Keysight Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(9/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
240
240
270
270
300
300
330
330
360
360
390
390
Tolerance
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
8
8
8
8
6
6
6
6
6
6
6
6
(MHz)
100
100
100
100
50
50
50
50
50
50
50
50
(GHz)min.
0.4
0.4
0.4
0.4
0.35
0.35
0.35
0.35
0.3
0.3
0.3
0.3
(: )max.
4.8
4.80
4.80
4.80
6.50
6.50
7.00
7.00
7.50
7.50
8.00
8.00
(mA)max.
100
100
100
100
50
50
50
50
50
50
50
50
MLG1005SR24HT000
MLG1005SR24JT000
MLG1005SR27HT000
MLG1005SR27JT000
MLG1005SR30HT000
MLG1005SR30JT000
MLG1005SR33HT000
MLG1005SR33JT000
MLG1005SR36HT000
MLG1005SR36JT000
MLG1005SR39HT000
MLG1005SR39JT000
(GHz)typ.
0.5
0.5
0.5
0.5
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
(: )typ.
3.42
3.42
3.54
3.54
4.82
4.82
5.21
5.21
5.39
5.39
5.97
5.97
Please contact us for ±2% inductance tolerance (code G) products.
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B +16193A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Keysight Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(10/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.4
1.4
1.4
1.5
1.5
1.5
1.7
1.7
1.7
1.9
1.9
1.9
2.1
2.1
2.1
2.3
2.3
2.3
2.6
2.6
2.6
2.9
2.9
2.9
Please
Q typ.
800MHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.4
1.4
1.4
1.5
1.5
1.5
1.7
1.7
1.7
1.9
1.9
1.9
2.1
2.1
2.1
2.3
2.3
2.3
2.6
2.6
2.6
2.9
2.9
2.9
1.8GHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.4
1.4
1.4
1.5
1.5
1.5
1.7
1.7
1.7
1.9
1.9
1.9
2.1
2.1
2.1
2.3
2.3
2.3
2.6
2.6
2.6
3.0
3.0
3.0
2.0GHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.9
1.9
1.9
2.1
2.1
2.1
2.3
2.3
2.3
2.7
2.7
2.7
3.0
3.0
3.0
2.4GHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.7
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.9
1.9
1.9
2.2
2.2
2.2
2.4
2.4
2.4
2.7
2.7
2.7
3.1
3.1
3.1
500MHz
22min.
22min.
22min.
22min.
22min.
22min.
22
22
22
22
26
26
21
21
22
22
22
23
23
23
23
23
23
22
22
22
23
23
23
23
23
23
20
20
20
21
21
21
22
22
22
21
21
21
22
22
22
24
24
24
Part No.*
800MHz
27min.
27min.
27min.
27min.
27min.
27min.
27
27
28
28
34
34
27
27
29
29
29
29
29
29
29
29
29
27
27
27
29
29
29
29
29
29
26
26
26
25
25
25
27
27
27
26
26
26
27
27
27
29
29
29
1.8GHz
46min.
46min.
46min.
46min.
46min.
46min.
46
46
45
45
57
57
44
44
48
48
48
47
47
47
48
48
48
44
44
44
47
47
47
46
46
46
41
41
41
41
41
41
44
44
44
42
42
42
43
43
43
47
47
47
2.0GHz
49min.
49min.
49min.
49min.
49min.
49min.
49
49
49
49
60
60
47
47
50
50
50
50
50
50
50
50
50
47
47
47
50
50
50
49
49
49
43
43
43
43
43
43
47
47
47
44
44
44
45
45
45
49
49
49
2.4GHz
53min.
53min.
53min.
53min.
53min.
53min.
53
53
54
54
66
66
53
53
56
56
56
57
57
57
56
56
56
53
53
53
56
56
56
54
54
54
49
49
49
48
48
48
52
52
52
49
49
49
50
50
50
54
54
54
MLG1005S0N3BT000
MLG1005S0N3CT000
MLG1005S0N4BT000
MLG1005S0N4CT000
MLG1005S0N5BT000
MLG1005S0N5CT000
MLG1005S0N6BT000
MLG1005S0N6CT000
MLG1005S0N7BT000
MLG1005S0N7CT000
MLG1005S0N8BT000
MLG1005S0N8CT000
MLG1005S0N9BT000
MLG1005S0N9CT000
MLG1005S1N0BT000
MLG1005S1N0CT000
MLG1005S1N0ST000
MLG1005S1N1BT000
MLG1005S1N1CT000
MLG1005S1N1ST000
MLG1005S1N2BT000
MLG1005S1N2CT000
MLG1005S1N2ST000
MLG1005S1N3BT000
MLG1005S1N3CT000
MLG1005S1N3ST000
MLG1005S1N5BT000
MLG1005S1N5CT000
MLG1005S1N5ST000
MLG1005S1N6BT000
MLG1005S1N6CT000
MLG1005S1N6ST000
MLG1005S1N8BT000
MLG1005S1N8CT000
MLG1005S1N8ST000
MLG1005S2N0BT000
MLG1005S2N0CT000
MLG1005S2N0ST000
MLG1005S2N2BT000
MLG1005S2N2CT000
MLG1005S2N2ST000
MLG1005S2N4BT000
MLG1005S2N4CT000
MLG1005S2N4ST000
MLG1005S2N7BT000
MLG1005S2N7CT000
MLG1005S2N7ST000
MLG1005S3N0BT000
MLG1005S3N0CT000
MLG1005S3N0ST000
contact us for ±2% inductance tolerance (code G) products.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(11/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
3.2
3.2
3.2
3.4
3.4
3.4
3.7
3.7
3.7
4.1
4.1
4.5
4.5
4.9
4.9
5.4
5.4
6.0
6.0
6.5
6.5
7.2
7.2
7.9
7.9
8.8
8.8
9.7
9.7
10.6
10.6
11.7
11.7
12.6
12.6
14.7
14.7
15.6
15.6
17.7
17.7
19.7
19.7
21.8
21.8
23.8
23.8
27.0
27.0
Please
Q typ.
800MHz
3.2
3.2
3.2
3.4
3.4
3.4
3.7
3.7
3.7
4.1
4.1
4.5
4.5
4.9
4.9
5.4
5.4
6.0
6.0
6.6
6.6
7.4
7.4
8.0
8.0
9.0
9.0
9.9
9.9
10.9
10.9
12.1
12.1
13.0
13
15.3
15.3
16.2
16.2
18.6
18.6
20.8
20.8
23.3
23.3
25.5
25.5
29.6
29.6
1.8GHz
3.3
3.3
3.3
3.6
3.6
3.6
3.9
3.9
3.9
4.3
4.3
4.8
4.8
5.4
5.4
5.8
5.8
6.8
6.8
7.4
7.4
8.6
8.6
9.3
9.3
10.8
10.8
12.4
12.4
13.8
13.8
16.2
16.2
18.3
18.3
22.0
22.0
24.1
24.1
29.0
29.0
36.8
36.8
2.0GHz
3.4
3.4
3.4
3.6
3.6
3.6
3.9
3.9
3.9
4.4
4.4
4.9
4.9
5.6
5.6
5.9
5.9
7.1
7.1
7.8
7.8
9.2
9.2
9.9
9.9
11.6
11.6
13.5
13.5
15.1
15.1
18.3
18.3
21.3
21.3
26.0
26.0
29.0
29.0
2.4GHz
3.5
3.5
3.5
3.8
3.8
3.8
4.1
4.1
4.1
4.6
4.6
5.2
5.2
6.1
6.1
6.3
6.3
7.8
7.8
8.6
8.6
10.5
10.5
11.3
11.3
13.7
13.7
16.7
16.7
19.0
19.0
500MHz
24
24
24
21
21
21
22
22
22
24
24
23
23
23
23
22
22
24
24
23
23
24
24
23
23
24
24
24
24
23
23
23
23
20
20
23
23
22
22
23
23
21
21
22
22
22
22
20
20
Part No.*
800MHz
30
30
30
26
26
26
28
28
28
30
30
30
30
29
29
28
28
29
29
28
28
30
30
28
28
30
30
30
30
28
28
29
29
24
24
28
28
26
26
28
28
25
25
27
27
26
26
23
23
1.8GHz
46
46
46
40
40
40
43
43
43
47
47
45
45
42
42
42
42
42
42
40
40
41
41
38
38
40
40
37
37
34
34
33
33
25
25
29
29
26
26
26
26
21
21
2.0GHz
48
48
48
42
42
42
45
45
45
49
49
47
47
43
43
43
43
43
43
41
41
41
41
38
38
39
39
36
36
33
33
31
31
22
22
26
26
22
22
2.4GHz
53
53
53
46
46
46
50
50
50
53
53
50
50
44
44
45
45
43
43
41
41
39
39
36
36
36
36
31
31
28
28
MLG1005S3N3BT000
MLG1005S3N3CT000
MLG1005S3N3ST000
MLG1005S3N6BT000
MLG1005S3N6CT000
MLG1005S3N6ST000
MLG1005S3N9BT000
MLG1005S3N9CT000
MLG1005S3N9ST000
MLG1005S4N3CT000
MLG1005S4N3ST000
MLG1005S4N7CT000
MLG1005S4N7ST000
MLG1005S5N1CT000
MLG1005S5N1ST000
MLG1005S5N6CT000
MLG1005S5N6ST000
MLG1005S6N2HT000
MLG1005S6N2ST000
MLG1005S6N8HT000
MLG1005S6N8JT000
MLG1005S7N5HT000
MLG1005S7N5JT000
MLG1005S8N2HT000
MLG1005S8N2JT000
MLG1005S9N1HT000
MLG1005S9N1JT000
MLG1005S10NHT000
MLG1005S10NJT000
MLG1005S11NHT000
MLG1005S11NJT000
MLG1005S12NHT000
MLG1005S12NJT000
MLG1005S13NHT000
MLG1005S13NJT000
MLG1005S15NHT000
MLG1005S15NJT000
MLG1005S16NHT000
MLG1005S16NJT000
MLG1005S18NHT000
MLG1005S18NJT000
MLG1005S20NHT000
MLG1005S20NJT000
MLG1005S22NHT000
MLG1005S22NJT000
MLG1005S24NHT000
MLG1005S24NJT000
MLG1005S27NHT000
MLG1005S27NJT000
contact us for ±2% inductance tolerance (code G) products.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(12/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
30.1
30.1
33.5
33.5
36.7
36.7
40.3
40.3
44.3
44.3
50.2
50.2
53.7
53.7
60.9
60.9
67.5
67.5
75.8
75.8
86.5
86.5
96.9
96.9
111.0
111.0
128.9
128.9
140.8
140.8
175.2
175.2
187.8
187.8
284.7
284.7
Please
Q typ.
800MHz
33.5
33.5
37.8
37.8
41.5
41.5
46.9
46.9
51.6
51.6
63.2
63.2
65.6
65.6
80.2
80.2
89.8
89.8
107.5
107.5
135.2
135.2
1.8GHz
2.0GHz
2.4GHz
500MHz
19
19
20
20
21
21
20
20
20
20
19
19
19
19
19
19
18
18
17
17
17
17
16
16
15
15
14
14
15
15
12
12
13
13
11
11
Part No.*
800MHz
21
21
23
23
23
23
21
21
21
21
20
20
19
19
18
18
16
16
15
15
13
13
1.8GHz
2.0GHz
2.4GHz
MLG1005S30NHT000
MLG1005S30NJT000
MLG1005S33NHT000
MLG1005S33NJT000
MLG1005S36NHT000
MLG1005S36NJT000
MLG1005S39NHT000
MLG1005S39NJT000
MLG1005S43NHT000
MLG1005S43NJT000
MLG1005S47NHT000
MLG1005S47NJT000
MLG1005S51NHT000
MLG1005S51NJT000
MLG1005S56NHT000
MLG1005S56NJT000
MLG1005S62NHT000
MLG1005S62NJT000
MLG1005S68NHT000
MLG1005S68NJT000
MLG1005S75NHT000
MLG1005S75NJT000
MLG1005S82NHT000
MLG1005S82NJT000
MLG1005S91NHT000
MLG1005S91NJT000
MLG1005SR10HT000
MLG1005SR10JT000
MLG1005SR11HT000
MLG1005SR11JT000
MLG1005SR12HT000
MLG1005SR12JT000
MLG1005SR13HT000
MLG1005SR13JT000
MLG1005SR15HT000
MLG1005SR15JT000
MLG1005SR16HT000
MLG1005SR16JT000
MLG1005SR18HT000
MLG1005SR18JT000
MLG1005SR20HT000
MLG1005SR20JT000
MLG1005SR22HT000
MLG1005SR22JT000
MLG1005SR24HT000
MLG1005SR24JT000
MLG1005SR27HT000
MLG1005SR27JT000
MLG1005SR30HT000
MLG1005SR30JT000
contact us for ±2% inductance tolerance (code G) products.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(13/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
Q typ.
800MHz
1.8GHz
2.0GHz
2.4GHz
500MHz
Part No.*
800MHz
1.8GHz
2.0GHz
2.4GHz
MLG1005SR33HT000
MLG1005SR33JT000
MLG1005SR36HT000
MLG1005SR36JT000
MLG1005SR39HT000
MLG1005SR39JT000
Please
contact us for ±2% inductance tolerance (code G) products.
○ Measurement equipment
Product No.
Manufacturer
4291B +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(14/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
1000
R18
R39
R22
82N
R10
R33
47N
22N
68N
56N
R27
39N
33N
27N
R15
R12
18N
100
15N
12N
Inductance(nH)
10N
8N2
6N8
10
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1
0
10
1N0
100
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(15/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
70
1N2
1N0
1N5
60
2N2
3N3
1N8
2N7
3N9
4N7
50
5N6
40
Q
6N8
30
8N2
22N
27N
82N
R10
33N
R12
20
39N
10N
47N
56N
R15
R18
68N
10
12N
R33
R27
18N
R22
R39
0
10
100
15N
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A +16193A
Keysight Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm
(16/16)
I
N
D
U
C
T
O
R
S
MLG1005S Type
PACKAGING STYLE
REEL DIMENSIONS
ø60min.
1.0
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
ø21±0.8
ø180±2.0
Dimensions in mm
Cavity
3.5±0.05
1.5 +0.1
–0.0
Type
MLG1005S
A
1.12±0.1
B
0.62±0.1
K
0.8 max.
A
8.0±0.3
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
K
B
4.0±0.1
2.0±0.05
160min.
Drawing direction
Taping
2.0±0.05
200min.
300min.
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160521 / inductor_commercial_high-frequency_mlg1005s_en.fm