LED-40W HL Series– Hazardous Location, Fixed Output and Dimmable Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: > _ 0.90 @ > _ 60% load 100-230V, > _ 85% load 277V Inrush Current: <20.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 0.40 Amps typical @ 120Vac, 60Hz, Full Load Maximum Power: 40W Current Regulation: ± 3% Over input line variation Load Regulation: ± 4% THD: < _ 20% @ > _ 60% load 100-230V, > _ 80% load 277V Leakage Current: 400 µA Typical Hold Up Time: Half Cycle Output Protection: Over-Voltage, Over-Current, Short Circuit (Auto Recovery) plus Internal Thermal Protection (Hiccup Mode) Environmental Specifications • Total Power: 40 Watts • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated • IP66 • High Power Factor • UL Type HL, with V5A Case • Rated for Hazardous Locations Constant Current - Product Specifications Model Number Current Out (mA ±3%) Voltage Out, Range (Vdc) Power Out Max (W) Typical Effic (%) LED40W-130-C0300-HL-XY 300 44-130 40 87 LED40W-114-C0350-HL-XY 350 38-114 40 86 LED40W-100-C0400-HL-XY 400 33-100 40 86 LED40W-89-C0450-HL-XY 450 30-89 40 86 Minimum Starting Temp: -30º Maximum Case Temp. 90°C Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% LED40W-72-C0550-HL-XY 550 24-72 40 85 Cooling: Convection LED40W-54-C0700-HL-XY 700 18-54 38 85 Vibration Frequency: 5 to 55 Hz/2g, 30 minutes Sound Rating: Class A Impact Resistanct: 1g/s MTBF: Weight: LED40W-48-C0830-HL-XY 830 16-48 40 85 LED40W-45-C0900-HL-XY 900 16-45 40 85 LED40W-40-C1000-HL-XY 1000 13-40 40 85 LED40W-36-C1100-HL-XY 1100 12-36 40 85 482,000 Hrs @ full load, 40ºC per MIL-217F Notice 2 LED40W-30-C1400-HL-XY 1400 10-30 42 85 12.9 oz (364 g) LED40W-24-C1670-HL-XY 1670 8-24 40 85 LED40W-22-C1820-HL-XY 1820 7-22 40 85 LED40W-18-C2220-HL-XY 2200 6-18 40 84 LED40W-15-C2680-HL-XY 2680 5-15 40 84 LED40W-13-C3080-HL-XY 3080 4-13 40 84 LED40W-12-C3330-HL-XY 3330 4-12 40 83 LED40W-10-C4000-HL-XY 4000 3-10 40 83 LED40W-09-C4450-HL-XY 4450 3-9 40 82 Current Out Range (mA) Power Out Max (W) Typical Effic (%) -X indicates lead options. B for bottom leads, S for side leads. -Y indicates dimming options are available. See options below. Blank = fixed current output Ordering Options: -D:Dimmable model dims 100-10%. Two extra wires on the output side: +Purple/-Gray. It offers 0-10V & Resistance dimming, compatible with most quality 0-10V dimmers. See page 3. -P: PWM dimmable version dims 100-10%. Two extra wires on the output side: +Purple/-Gray. It is PWM Dimmable via a positive duty cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4. Sign Components Manual E332160 Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Specifications subject to change without notice. Constant Voltage - Product Specifications Model Number Voltage Out (Vdc ±5%) LED40W-09-HL-X 9 1113-4450 40 87 LED40W-10-HL-X 10 1000-4000 40 86 LED40W-12-HL-X 12 825-3330 40 86 LED40W-13-HL-X 13 770-3080 40 86 LED40W-15-HL-X 15 670-2680 40 85 LED40W-18-HL-X 18 550-2200 40 85 LED40W-22-HL-X 22 455-1820 40 85 LED40W-24-HL-X 24 418-1670 40 85 LED40W-30-HL-X 30 350-1400 42 85 LED40W-36-HL-X 36 275-1100 40 85 LED40W-40-HL-X 40 250-1000 40 85 LED40W-45-HL-X 45 225-900 40 85 LED40W-48-HL-X 48 208-830 40 85 LED40W-54-HL-X 54 175-700 38 84 LED40W-72-HL-X 72 138-550 40 84 LED40W-89-HL-X 89 113-450 40 84 LED40W-100-HL-X 100 100-400 40 83 LED40W-114-HL-X 114 75-350 40 83 LED40W-130-HL-X 130 75-300 40 82 Class 2: US/Canada US Only Rev 8-25-15 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED40W-HL Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 4 Dimensions - Inches (mm) Standard “-BY” Bottom Leads Configuration: “-SY” Optional Side Leads Configuration: 3.78 [96] 3.78 [96] 1.89 [48] Dimming Purple (+) Gray (-) Power Factor / Load (LED40W Rev E1.1 models) 5.91 Min [150 Min] DC OUT Red (+) Blue (-) 0.70 Lifetime (kHrs) 0.75 120Vac 277Vac 15% THD 0.80 PF 115 20% 120Vac 277Vac 10% 0.65 0.60 90 75 60 45 30 5% 15 0.55 0.50 50% (LED40W Rev E1.1) 130 0.95 0.85 0.39±0.04 [10±1] Lifetime / Case Temperature THD / Load (LED40W Rev E1.1 models) 25% 0.90 Dimming Purple (+) Gray (-) 0.39±0.04 [10±1] WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. Dimming Leads: 22 AWG, rated 300 V, 105C. All wires are stranded with solder dipped ends. 1.00 AC IN White (N) Black (L) 0.16 [4] DC OUT Red (+) Blue (-) 0.14 [3.6] 0.2 [5] 1.4 [35.6] 0.39±0.04 [10±1] AC IN White (N) Black (L) 5.91 Min [150 Min] 0.16 [4] 1.4 [35.6] 0.14 [3.6] 0.2 [5] 5.91 Min [150 Min] 1.18 [30] 1.18 [30] 1.89 [48] 2.8 [71] Tc = 90°C max 2.8 [71] Tc = 90°C max 0.39 [10] 0.39 [10.0] 1.2 [30.5] 0.39 [10.0] 1.2 [30.5] 0.39 [10] 60% 70% 80% Load 90% 100% 0% 50% 60% Safety and EMC Compliance UL8750 Type HL, CSA-C22.2 EN61347 Class B 80% 90% Load 100% 0 45 50 55 60 65 70 75 80 85 Case Hotspot Temperature (°C) (LED40W Rev E1.1) 95% 90% 85% 120Vac 277Vac 80% 75% UL Conditions of Acceptability See website for additional information 70% 60% 70% 80% 90% Normalized Output Voltage 90 Note: Life calculations are based on reliability with confidence using a 90% confidence level and <5% failure rate. At a confidence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (Failure is defined as a driver drifting outside specification, rather than fail to operate) Typical Efficiency / Load 100% Efficiency UL/CUL CE FCC, 47CFR Part 15 70% 100% Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED40W-HL Series SSL Solutions Faster Than The Speed Of Light® Pg 3 of 4 “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum 0 mA -2.0 V ——- 2 mA +15 V Source Current out of 0-10V Purple Wire Absolute Voltage Range on 0-10V (+) Purple Wire “-D” Typical Dimming Circuit Dim (+) Purple LED40W-xxx-Cxxxx-HL-xD IP710 Wall Dimmer Dim (-) Gray (Dimmer must be current-sink type control) Output Current / 0-10VDC Dimming Control Voltage Output Current % 100 90 80 70 60 50 40 30 20 10 0 0V 1V 2V 3V 4V 5V 6V 7V Purple-to-Gray Voltage (Vdc) 8V 9V 10V Notes: 1. 2. 3. 4. D dimmable version comes with an extra two wires on the output side: +Purple/-Gray. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent. D & D3 dimmable versions are not intended to dim below about 5% @ 0V or 10% @ 1.0V. Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED40W-HL Series SSL Solutions Faster Than The Speed Of Light® Pg 4 of 4 “-PD” Option: PWM Dimming Parameters Absolute Maximum Voltage Range on PWM Input (Purple Wire) Input LOW Level Voltage Range (Purple Wire) Input HIGH Level Voltage Range (Purple Wire) Sink Current into PWM Input (Purple Wire) PWM Input Signal Frequency PWM Input Signal Positive Duty Cycle Minimum Typical Maximum -2.0V -2.0 +9.0 0mA 500Hz 0% 10V 0V 10V ——10-90% +15V +5.5V +15V 1.2mA 1500Hz 100% “-P” PWM Positive Dimming Typical Circuit PWM (+) Purple LED40W-XX-CXXXX-HL-xP PWM In PWM (-) Gray Output Current / 1.0kHz Positive Duty Cycle Output Current % 100 90 80 70 60 50 40 30 20 10 0 0% 10% 20% 30% 40% 50% 60% Positive Duty Cycle 70% 80% 90% 100% Notes: 1. PD dimmable version comes with an extra 2 wires on the output side for PWM type dimming: +Purple/-Gray. 2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle. 3. Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com