CPC1004N
4 Pin SOP OptoMOS® Relay
Blocking Voltage (DC)
Load Current (DC)
Max On-resistance
CPC1004N
100
300
4
Description
CPC1004N is a miniature low voltage, low on resistance 1-Form-A DC solid state relay in a 4 pin SOP
package. The relay uses optically coupled MOSFET
technology to provide 1500Vrms of input to output isolation. The efficient MOSFET switch and photovoltaic
die use Clare’s patented OptoMOS® architecture.
The optically-coupled input is controlled by a highly
efficient GaAIAs infrared LED. The CPC1004N uses
Clare’s state of the art double molded vertical construction packaging to produce the world’s smallest
relay. The CPC1004N is ideal for replacing larger
less reliable reed and electromechanical relays.
Units
V
mA
Ω
Features
• Small 4 Pin SOP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 1500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Tape & Reel Version Available
Approvals
• UL Recognized Component
File #: E76270
• Certified to: EN60950
Applications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security Systems
• Aerospace
• Industrial Controls
• Reed Relay Replacement
Ordering Information
Part #
CPC1004N
CPC1004NTR
Description
4 Pin SOP (100/tube)
4 Pin SOP (2000/reel)
Pin Configuration
CPC1004N Pinout
Switching Characteristics of
Normally Open (Form A) Devices
RoHS
2002/95/EC
DS-CPC1004N-R02.0
e3
www.clare.com
1
CPC1004N
Absolute Maximum Ratings (@ 25˚C)
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation
Total Power Dissipation 1
Capacitance Input to Output
Isolation Voltage Input to Output
Operational Temperature
Storage Temperature
1
Ratings
100
5
50
1
70
400
1
1500
-40 to +110
-40 to +125
Units
V
V
mA
A
mW
mW
pF
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate Linearly 3.33 mw / ºC
Electrical Characteristics
Parameter
Conditions
Symbol
Output Characteristics @ 25°C (Unless Otherwise Specified)
Load Current 1, Continuous DC
IL
Load Current, Continuous
T=110°C, IF=10mA
Peak Load Current
10ms
ILPK
On-Resistance 2
IL=300mA
RON
Off-State Leakage Current
VL=100V
ILEAK
Switching Speeds
Turn-On
IF=5mA, VL=10V
TON
IF=5mA, VL=10V
TOFF
Turn-Off
Output Capacitance
50V; f=1MHz
COUT
Input Characteristics @ 25°C
Input Control Current
IL=300mA
IF
Input Dropout Current
IF
IF=5mA
VF
Input Voltage Drop
Reverse Input Voltage
VR
Reverse Input Current
VR=5V
IR
1
2
2
Min
Typ
Max
Units
-
-
300
100
350
4
1
mA
mA
mA
Ω
-
25
3
1
-
ms
ms
pF
2
0.3
0.9
-
0.9
1.2
-
50
1.4
5
10
mA
mA
V
V
µA
µA
Load current derates linearly from 300mA @ 25oC to 100mA @ 110oC.
Measurement taken within 1 second of on time.
www.clare.com
R02.0
CPC1004N
PERFORMANCE DATA*
CPC1004N
Typical LED Forward Voltage Drop
(Ambient Temperature = 25 C)
IF = 5mADC
Device Count (N)
CPC1004N
Typical Blocking Voltage Distribution
(Ambient Temperature = 25 C)
Device Count (N)
Device Count (N)
CPC1004N
Typical On-Resistance Distribution
(Ambient Temperature = 25 C)
(Load Current = 300mA)
Blocking Voltage (V)
On-Resistance (Ω)
LED Forward Voltage Drop (V)
CPC1004N
Typical IF for Switch Dropout
(Ambient Temperature = 25 C)
(Load Current = 300mA)
CPC1004N
Typical Turn-On Time
(Ambient Temperature = 25 C)
(Load Current = 300mA; IF = 5mA)
Device Count (N)
Device Count (N)
Device Count (N)
CPC1004N
Typical IF for Switch Operation
(Ambient Temperature = 25 C)
(Load Current = 300mA)
LED Current (mA)
LED Current (mA)
CPC1004N
Typical Turn-Off Time
(Ambient Temperature = 25 C)
(Load Current = 200mA; IF = 5mA)
CPC1004N
Typical MaximumLoad
Current vs. Temperature
CPC1004N
Typical Leakage vs. Temperature
(Measured across Pins 3 & 4) VL = max rated
IF =10mA
Leakage (µA)
Load Current (mA)
Device Count (N)
Turn-On (ms)
IF =5mA
Temperature ( C)
CPC1004N
Typical Turn-On vs. Temperature
(Load Current = 200mA)
CPC1004N
Typical Turn-Off vs. Temperature
(Load Current = 300mA)
Turn-On (ms)
Blocking Voltage (VRMS)
CPC1004N
Typical Blocking Voltage
vs. Temperature
Temperature ( C)
5mA
Turn-Off (ms)
Turn-Off (ms)
10mA
10mA
5mA
Temperature ( C)
Temperature ( C)
Temperature ( C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our
application department.
R02.0
www.clare.com
3
CPC1004N
PERFORMANCE DATA*
10mA
5mA
LED Forward Current (mA)
Temperature ( C)
CPC1004N
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 100mA)
LED Current (mA)
IF = 10mA
LED Current (mA)
IF = 5mA
LED Forward Current (mA)
CPC1004N
Typical IF for Switch Operation
vs. Temperature
(Load Current = 100mA)
CPC1004N
Typical On-Resistance vs. Temperature
(Load Current = max rated @ temperature)
On-Resistance ( Ω)
Turn-Off (ms)
Turn-On (ms)
LED Forward Voltage Drop (V)
50mA
Temperature ( C)
Temperature ( C)
CPC1004N
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25 C)
IF = 5mA
CPC1004N
Energy Rating Curve
Temperature ( C)
Load Current (A)
Load Current (mA)
CPC1004N
Typical Turn-Off vs. LED Forward Current
(Load Current = 100mA)
CPC1004N
Typical Turn-On vs. LED Forward Current
(Load Current = 100mA)
CPC1004N
Typical LED Forward Voltage Drop
vs. Temperature
Load Voltage (V)
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our
application department.
4
www.clare.com
R02.0
Manufacturing Information
Soldering
Recommended soldering processes are limited to
260ºC component body temperature for 10 seconds.
RoHS
2002/95/EC
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
e3
MECHANICAL DIMENSIONS
4 Pin SOIC Narrow ("N" Suffix)
PC Board Pattern
(Top View)
0.38 TYP.
(0.015 TYP.)
2.18 MAX.
(0.086)
2.54 TYP.
(0.100 TYP.)
Tape and Reel Packaging for 4 pin SOIC package
A0 = 6.50
(0.256)
330.2 DiA
(13.00" DiA)
P = 8.00
(0.315)
A
Top Cover
Tape Thickness
0.102 MAX
(0.004 MAX)
B0 = 4.70
(0.185)
K1 = 2.30
(0.091)
W = 12.00 MAX
(0.472 MAX)
K0 = 2.7
(0.106)
A
SECTION A-A
NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2
Embossed
Carrier
Embossment
Dimensions:
mm
(inches)
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product
descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no
liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement
of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended
to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to
discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1004N-R02.0
©Copyright 2005, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
8/1/05
5