VCXO C5260 Typical Applications Features Base Stations Test Equipment Switching Portable Equipment Surface Mount FR4 based Package Reflow Process Compatible AT-Cut Crystal Low Phasenoise Frequency range 1 MHz – 160 MHz Standard frequencies 16.384; 30.720; 32.768; 38.880 MHz; 51.840; 52.00; 68.736; 77.760; 155,52 MHz Frequency stabilities1 Parameter vs. operating temperature range (Referenced to +25°C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging /1. Year vs. aging / year (followingYears) Min Typ -15.0 5 Max. Units Operating temp range Ordering Code +15.0 ppm -20 … +70°C D105 Min -10.0 -3.0 -1.0 -3.0 -1.0 Typ Max. +10.0 +3.0 +1.0 +3.0 +1.0 Units ppm ppm ppm ppm ppm Condition @vc=Vs/2 VS ± 5% Load ± 10% Min Typ Max. Units Operating temp range Ordering Code +30.0 ppm -40 … +85°C F305 Max. +15.0 +3.0 +2.0 +3.0 +1.0 Units ppm ppm ppm ppm ppm Max. 5.25 40 90 3.465 30 80 25 Units VDC mA mA VDC mA mA mA Max. Units 5 60 pF ns % 1 55 Ω ns % 1 60 Ω ns % Frequency stabilities1 Parameter vs. operating temperature range (Referenced to +25°C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging /1. Year vs. aging / year (followingYears) -30.0 Min -15.0 -3.0 -2,0 -3.0 -1.0 Typ 5 Condition @vc=Vs/2 VS ± 5% Load ± 10% Supply voltage Parameter Supply voltage (Vs) Current consumption Current consumption Supply voltage (Vs) Current consumption Current consumption Current consumption Min 4.75 Typ 5.0 3.135 3.3 Min Typ HCMOS 15.0 5 Ordering Code SV050 @ HCMOS @ PECL SV033 @ LVHCMOS @ LVPECL @ LVDS Condition RF output Parameter Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle 40 PECL 50 45 Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax @ 15 pF 10 to 90 % @ Vs/2 Vs - 2V 20 to 80 % RFL Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax 5 Ordering Code RFH RFP LVDS 100 40 Condition 10 to 90 % v.2006-03-07 · page 1 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax VCXO C5260 Frequency Tuning (EFC) Parameter Tuning Range Min ±75.0 ±100.0 Linearity Tuning Slope Control Voltage Range 0.0 0.5 10 Frequency control input impedance Typ ±90.0 ±140.0 Max. +200.0 ±200.0 10 Positive 1.65 3.3 2.5 4.5 Units ppm ppm % Condition Frequency > 53MHz Frequency <53MHz VDC VDC kΩ with Vs=3.3VDC with Vs=5.0VDC Additional parameters Parameter Phase Noise Min Jitter Weight Processing & Packing Typ -75 Max. Units dBc/Hz Condition 10 Hz @155 MHz -110 dBc/Hz -135 dBc/Hz 1 kHz -142 dBc/Hz 10 kHz -142 dBc/Hz 100 kHz 1 2 100 Hz ps RMS g PECL 3,3V @ 10 kHz to 20 MHz handling&processing note Enclosures Type G241 < 53 MHz Package Codes: Code A1 Type G251 > 53 MHz Height “H” 2,3 mm Code B1 Height “H” 2,3 mm Dimensions: mm Dimensions: mm Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-03-07 · page 2 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax VCXO C5260 1 2 3 4 5 6 Pin Connections Control Voltage (Vc) N/C / Enable (optional) Ground RF Output N/C Supply Voltage Input (Vs) 1 2 3 4 5 6 Pin Connections Control Voltage (Vc) N/C / Enable (optional) Ground RF Output Complementary RF Output Supply Voltage Input (Vs) true table Pin 2 High Open Low LVDS Pin 4 Pin 5 Data compl. Data Data compl. Data High Tristate High Tristate LVPECL Pin 5 High compl. Data compl. Data Pin 4 Low Data Data Marking 5A1-xxx frequency * VI AYYWW Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Operable temperature range Storage temperature range -30 -40 Typ Max. 7 Units V +80 +90 °C °C Condition Typical Phase Noise and Jitter (52 MHz; HCMOS output) Frequency range [Hz] 100Hz to 1.5MHz 50kHZ to 1.5MHz 12kHz to 20MHz Sφ(f) [dB] -81dB -87dB -85dB (155,52 MHz; PECL output) Jitter [ps rms] 0.26ps 0.14ps 0.16ps Frequency range [Hz] 500Hz to 1.5MHz 65kHZ to 1.5MHz 12kHz to 20MHz Sφ(f) [dB] -73.96dB -75.87dB -65.34dB Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Jitter [ps rms] 0.205ps 0.165ps 0.553ps v.2006-03-07 · page 3 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax VCXO C5260 Typical tuning slope Typical frequency stability vs temperature 20 2 00 ,00 15 1 50 ,00 10 1 00 ,00 5 ppm 50 ,00 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 0 ,00 0,00 0,50 1,00 1,50 2,00 2,50 3 ,0 0 3 ,5 0 -5 -50 ,00 -10 -1 00 ,00 -15 -1 50 ,00 -20 Temp. [°C] Tuning voltag e [V] Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Enclosure Type G241 / G251 Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Tape width W [mm] 12 Quantity per meter 125 Quantity per reel tbd Dimension P 8 Production tolerance complying DIN IEC 286-3 Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-03-07 · page 4 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax VCXO C5260 Recommended Reflow Profile Pb-Free Assembly /Sn-Pb Assembly Profile Feature Pb-Free Assembly /Sn-Pb Assembly Profile Feature Average ramp-up rate (TL to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) 150°c 200°c 60-180 seconds Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Peak Temperature (Tp) max 260°C Time within 5°C of actual Peak Temperature (tp) 20-40 seconds Ramp-down Rate 6°C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Stability Code Supply Voltage Code RF Output Code Package Code RFH A1 C5260 Example: Step 2 C5260 D105 SV050 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model Package Code Dash Dash Number C5260 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N = C5260A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2006-03-07 · page 5 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax