GS1A THRU GS1M SURFACE MOUNT GLASS PASSIVATED RECTIFIER VOLTAGE： ：50 TO 1000V CURRENT： ： 1.0A SMA／ ／DO-214AC FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at TL =100℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated Forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Storage and Operating Junction Temperature Vrrm Vrms Vdc GS 1A 50 35 50 GS 1B 100 70 100 GS 1D GS 1G GS 1J GS 1K GS 1M units 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V If(av) 1.0 A Ifsm 30.0 A Vf 1.1 V μA μA Cj R(jl) 5.0 200.0 15.0 30.0 pF ℃/W Tstg -50 to +150 ℃ Ir Note： 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area1 1 Rev.A6 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GS1A THRU GS1M 2 2 Rev.A6 www.gulfsemi.com