HVM5 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION HVM16 HIGH VOLTAGE ASSEMBLIED RECTIFIER VOLTAGE RANGE 5000 to 16000 Volts CURRENT 0.35 Amperes FEATURES * * * * * * Low cost Low leakage Isolated case Surge overload rating - 50 amperes peak Mounting position: Any Low forward voltage drop HVM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL HVM5 HVM8 HVM10 HVM12 HVM14 HVM15 HVM16 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 5 8 10 12 14 15 16 K Volts Maximum RMS Voltage VRMS 3.5 5.6 7.0 8.4 9.8 10.5 11.2 K Volts Maximum DC Blocking Voltage VDC 5 8 10 12 14 15 16 K Volts RATINGS Maximum Average Forward Rectified Current at T A = 50 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range IO 350 mAmps I FSM 50 Amps T J, T STG -20 to + 135 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) SYMBOL HVM5 Maximum Instantaneous Forward Voltage at 0.35A DC CHARACTERISTICS VF 8.0 Maximum DC Reverse Current at Rated DC Blocking Voltage IR NOTES:1. Enough heat sink must be considered in application. 2. Operating and Storage Temperature : -20oC to +135oC 3. Suffix “ L “ for Wire type. HVM8 HVM10 HVM12 14.0 HVM14 HVM15 14.0 5.0 HVM16 UNITS Volts uAmps 1998-8 Back RECTRON