Corporate: www.cdtechno.com Corporate: www.cdtechno.com Product: www.cdpowerelectronics.com IHB60T 60 Watt Triple Output Half Brick DC/DC Converter 18 - 40 & 33 - 75V Input Range Each Channel Independently Current Limited High Efficiency: 87% Typical 1500VDC Isolation Between Input and Output Operation to 100°C Baseplate Temperature 50µS Transient Recovery, 0-90% Load Step Primary & Secondary Remote On/Off IHB60T48 Series Approved to UL/CUL 1950, EN60950 The IHB60T series triple output standard half brick modules are designed for today’s demanding industrial applications. Available in two wide range inputs, these isolated converters offer many features in the standard models. With a complement of safety agency approvals and low noise operations, the converters respond extremely fast to change in load conditions. Inherent in the design are very well-controlled output voltages and minimal need for minimum loading on main (V1) output. PRODUCT SELECTION CHART INPUT VOLTAGE IHB60T240312 IHB60T240315 IHB60T240512 IHB60T240515 IHB60T480312 IHB60T480315 IHB60T480512 IHB60T480515 (VDC ) 24 24 24 24 48 48 48 48 (18-40) (18-40) (18-40) (18-40) (33-75) (33-75) (33-75) (33-75) ABSOLUTE MAX. RATINGS Output Short-Circuit Duration Continuous Baseplate Temperature +100°C Lead Temperature (soldering, 10 seconds max) +300°C Storage Temperature +125°C Input to Output Isolation 1500 VDC RATED VOUT (VDC) RATED MAXIMUM I OUT (A) V1 (±) V2 (±) V3 (±) V1(±) V2(±) V3(±) 3.3 3.3 5.1 5.0 3.3 3.3 5.1 5.0 12 15 12 15 12 15 12 15 12 15 12 15 12 15 12 15 18 18 12 12 18 18 12 12 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 EFFICIENCY vs TEMPERATURE TCASE = +40°C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified.* Change in Efficiency (%) MODEL Case Temperature (°C) SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. INPUT PARAMETER Voltage Range IHB60T24XX Series IHB60T48XX Series Reflected Ripple Current Input Ripple Rejection Maximum Input Current IHB60T24XX Series IHB60T48XX Series No Load Power Dissipation Inrush Charge IHB60T24XX Series IHB60T48XX Series Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled CONDITIONS GENERAL IHB60TX0312** OUTPUT PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency TYP MAX UNITS 18 33 24 48 40 75 220 50 60 VDC VDC mA dB 6 3 6 A A W 0.29 0.165 mC mC 10 25 mA mA Peak - Peak DC to 1KHz Output Power = 60W VIN = 16V VIN = 30V POUT = 0, VIN, Min<VIN<VIN, Max 7.5 15 PARAMETER ISOLATION Input to Output Input to Baseplate Channel to Channel Resistance, Input - Output Capacitance, Input - Output Leakage Current GENERAL Set Point Accuracy Turn-on Time Remote On/Off Control Inputs Primary Sink Current-Logic Low Vlow Vhigh Secondary Sink Current-Logic Low Vlow Vhigh External Synchronization Input Frequency Pulse Width Source Impedence Input High Voltage Input Low Voltage Input Impedance Switching Frequency Weight TEMPERATURE Operation/Specification Storage Shutdown Thermal Inpedance MIN CONDITIONS MIN Peak Test 1500 1500 500 10 Any Channel to Any Channel TYP V ISO = 240VAC, 60Hz 2000 180 V IN = Nominal, 50% Load Within 1% of Nominal V OUT 3.5 MAX UNITS V DC V DC V DC MΩ pF µA, rms Open Collector/Drain VIN = VMAX 1 5 % mSec 7 0.8 Open Collector mA V 100 0.4 Open Collector µA V 520 320 47 5 1 KHz nSec Ω V V Ω KHz oz (g) Open Collector/Drain 440 150 4 0 470 480 470 490 3 (85) Case Temperature -40 -55 +100 Case to Ambient CONDITIONS 8.2 V1 Min Total Combined O/P Power = 60 Watts Max. IO Nom 0.5 DC to 20MHz* * °C °C °C °C/W +100 +125 +115 Max 30 3.3 9 100 60 3.15 .02 VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load V2 Nom 18 200 3.80 .05 0.05 0.50 23 19 1.0 1.0 150 35 250 50 5.0 25 Min Nom 0 15 12.2 1.25 150 .02 V3 Max Min 30 Max 15 12.2 1.25 150 30 2.5 0 250 Dependent on V1 .05 .02 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 UNITS Nom 2.5 250 .05 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 W V A mV V %/°C % % A A 50 to 100% Load Step VOUT , 1% of VOUT, Nom IOUT1=9A, (IOUT2+IOUT3)=2.5A F.L. VIN=Nominal 4.2 85 86 mV µSec V % * See Application Notes available on the web at www.cdpowerelectronics.com ** X = Either 24 or 48 Product: www.cdpowerelectronics.com IHB60T REV A 10/01 2 SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. PARAMETER IHB60TX0315** OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency PARAMETER IHB60TX0512** OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency PARAMETER IHB60TX0515** OUTPUT Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency CONDITIONS V1 Min Total Combined O/P Power = 60 Watts Max. IO Nom 0.5 DC to 20MHz* See Application Notes* V2 Nom Max 30 3.3 9 100 60 18 200 3.80 .05 3.15 .02 VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 0.05 0.50 23 19 1.0 1.0 150 35 250 50 5.0 25 Min 0 V3 Nom Max Min 15 30 15.85 1 2 0 125 250 Dependent on V1 .02 .05 UNITS Nom Max 15 15.85 1 125 30 2 250 .02 .05 1.0 2.0 1.0 2.0 See Regulation Curves See Regulation Curves 4.0 4.0 3.2 4.0 3.2 4.0 W V A mV V %/°C % % A A 50 to 100% Load Step VOUT , 1% of VOUT, Nom IOUT1=9A, (IOUT2+IOUT3)=2A F.L. V IN=Nominal CONDITIONS 4.2 85 86 Min Nom Max 30 5.1 6.0 125 60 V1 Total Combind O/P Power = 60 Watts Max IO Nom 0.5 DC to 20MHz* * mV µSec V % V2 12 200 5.50 .05 4.75 .02 VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load 0.05 0.50 16 12.6 0.10 1.0 200 35 300 50 6.8 16 Min Nom 0 V3 Max 15 12 1.25 150 Min 30 2.5 0 250 Dependent on V1 .02 .05 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 UNITS Nom Max 15 12 1.25 150 30 2.5 250 .02 .05 1.0 2.0 See Regulation Curves 5.0 4.0 5.0 W V A mV V %/°C % % A A 50 to 100% Load Step V OUT, 1% of VOUT, Nom IOUT1=6A, (IOUT2+IOUT3)=2.5A F.L. VIN=Nominal CONDITIONS 6.0 86 87 Min Nom Max 30 5.0 6 100 60 V1 Total Combined O/P Power = 60 Watts Max IO Nom 0.5 DC to 20MHz* * mV µSec V % 4.60 .02 VIN, Min≤VIN≤VIN, Max IO = IO, Nom Min Load to Rated Load Other Outputs Min Load V2 12 200 5.50 .05 0.05 0.50 16 12.6 0.10 1.0 200 35 300 50 6.8 16 Min Nom 0 15 15.3 1 125 V3 Max Min 30 2 0 250 Dependent on V1 .02 .05 1.0 2.0 See Regulation Curves 4.0 3.2 4.0 UNITS Nom Max 15 15.3 1 125 30 2 250 .02 .05 1.0 2.0 See Regulation Curves 4.0 3.2 4.0 W V A mV V %/°C % % A A 50 to 100% Load Step VOUT , 1% of VOUT, Nom IOUT1=6A, (IOUT2+IOUT3)=2A F.L. V IN=Nominal 6.0 86 87 mV µSec V % * See Application Notes available on the web at www.cdpowerelectronics.com ** X = Either 24 or 48 Product: www.cdpowerelectronics.com IHB100T REV A 10/01 3 MECHANICAL SIDE VIEW PIN SIDE DOWN PIN CONNECTIONS 1 2 3 4 5 6 7 8 9 10 11 12 PIN SIDE UP PRIMARY ON/OFF -VIN +V IN SYNC IN -V2 +V2 TRIM +V1 -V1 SECONDARY ON/OFF +V3 -V3 NOTES: All dimensions are in inches (millimeters). PIN PLACEMENT TOLERANCE: ± 0.005" MECHANICAL TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability. C&D Technologies (Power Electronics) Ltd. Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.770.9369 C&D Technologies, (NCL) Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. Product: www.cdpowerelectronics.com IHB60T REV A 10/01 4