DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM AlInGaP : DDx-xRS-I2 TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > High brightness surface mount LED. 120° viewing angle. > > > > Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Consumer appliances: Backlighting illumination as in PDAs, LCD TV. > Communication: indicator and backlight in mobile phone, flash light. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Luminous Intensity @ 2mA; IV (mcd) Typ. Min. Max. Viewing Angle˚ DDS-CRS-J2L1-1-I2 Super red, 632nm 120 5.6 9.0 14.0 DDO-CRS-LM2-1-I2 Orange, 605nm 120 11.2 18.0 28.5 DDY-CRS-KL2-1-I2 Yellow, 587nm 120 7.2 11.2 18.0 DDY-CRS-LM2-1-I2 Yellow, 587nm 120 11.2 18.0 28.5 Not for new design NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. Electrical Characteristics at Tj=25˚C Part Number DDS, DDO, DDY Vf @ If = 2mA Typ. (V) Max. (V) Vr @ Ir = 10uA Min. (V) 12 2.2 1.8 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 20 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 45 mW LED junction temperature Power dissipation (at room temperature) 2 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) DDS; Super-red Full 625 - 640 DDO; Orange Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 DDY; Yellow Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group J2 5.6...7.2 K1 7.2...9.0 K2 9.0...11.2 L1 11.2...14.0 L2 14.0...18.0 M1 18.0...22.4 M2 22.4...28.5 Luminous intensity is measured with an accuracy of ± 11%. 3 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination Forward Current Vs Forward Voltage Forward Current Forward Voltage Forward Current VsVs Forward Voltage 30 30 5 4 3 2 1 25 25 Forward Current, mA 6 Forward Current, mA Relative Intensity; Normalized at 2mA Relative Intensity Vs Forward Current 20 20 15 15 30 25 20 15 10 10 10 55 00 5 1.2 1.20 0 0 2 4 6 8 1.4 1.4 1.2 10 1.6 1.6 22 2.2 2.2 1.4Forward 1.6 Voltage; 1.8 2 V Forward Voltage; V Forward Current; mA 2.2 2.4 2.4 2.4 Forward Voltage; V Forward Current Vs Ambient Temperature 25 Forward 1.8 1.8 Relative Relative Intensity Intensity Vs Vs Wavelength Wavelength Current Vs Ambient Temperature Relative Intensity Vs Wavelength 11 Relative Intensity Current, ForwardForward Current, mA mA 0.9 0.9 25 20 0.8 0.8 0.7 0.7 0.9 Orange 20 15 0.6 0.6 0.8 0.5 0.5 0.7 Super Red 10 15 1 0.4 0.4 0.6 Yellow 0.3 0.3 0.5 5 10 0.2 0.2 0.4 0 0.1 0.1 0.3 00 0.2 500 500 0.1 5 0 20 40 60 80 100 Ambient Temperature 0 0 20 40 60 600 600 500 100 Ambient Temperature 800 800 Wavelength; Wavelength; nm nm 0 80 700 700 550 600 650 700 750 800 Wavelength; nm Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 4 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination DomiLED • AllnGaP : DDx-xRS-I2 Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn Plating 5 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination Recommended Solder Pad 6 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 7 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination Packaging Specification 8 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 9 22/06/2012 V5.0 DOMINANT TM AlInGaP : DDx-xRS-I2 Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 10 22/06/2012 V5.0 DOMINANT TM Opto Technologies AlInGaP : DDx-xRS-I2 Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 09 Sep 2008 2 Not for new design: DDY-CRS-KL2-1-I2 Add new partno: DDY-CRS-LM2-1-I2 27 Jul 2009 - Update company name 31 May 2010 4 Add Graph: Relative Luminous Intensity Vs Forward Current 08 Mar 2012 8 Error in carrier tape 22 Jun 2012 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 11 22/06/2012 V5.0 DOMINANT TM Opto Technologies AlInGaP : DDx-xRS-I2 Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Sdn. Bhd. Shanghai Representative Office Rm 305, Hongwell International Plaza No. 1600 Zhong Shan(W) Rd, Xuhui District, Shanghai, China 200235 Tel: +86 21 5403 5655, +86 21 5403 5818 Fax: +86 21 5403 6055 E-mail: [email protected] DOMINANT Opto Technologies Sdn. Bhd. Shenzhen Representative Office Rm 1808, Block B, South International Plaza No 3013, Yitian Road, Futian District, Shenzhen, 518048 P.R. China Tel: +86 755 8282 1781 E-mail: [email protected] DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. RM 211 SUNTEAK CITY APT. 513-15 Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-725, Korea Tel: +82-31-701-5203 Fax: +82-31-701-5204 E-mail: [email protected] DOMINANT U.S.A Sales Office 25 Rockaway Road, 08833 Lebanon, New Jersey, USA Tel: (908) 439-9930 Cell: (908) 343-5810 Fax: (908) 439-9929 E-mail: [email protected] DOMINANT Europe Sales Office DOMINANT Semiconductors Europe GmbH Raiffeisenstr. 38, 74906 Bad Rappenau Germany Tel: +49 (0) 7264-89010-10 / +49 (0) 7264-89010-11 Cell: +49 173-6907370 / +49 173-6907751 Fax: +49 (0) 7264-89010-29 E-mail: [email protected]; [email protected] DOMINANT India Sales Office C-11,Vasanth Business Centre #86, TTK Road, Alwarpet Chennai - 600 018, INDIA Tel: 91-44-42030616 / 516 Cell: 91-9444920537 Fax: 91-9444920616 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM