Surface Mount Aluminum Electrolytic Capacitors NACV Series FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNT • HIGH VOLTAGE (160VDC AND 400VDC) • 8 x10.8mm ~ 16 x17mm CASE SIZES • LONG LIFE (2000 HOURS AT +105OC) includes all homogeneous materials • DESIGNED FOR REFLOW SOLDERING *See Part Number System for Details RoHS Compliant CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance 160 10 ~ 82 Max. Leakage Current After 2 Minutes Max. Tanδ @ 120Hz Z-25°C/Z+20°C Low Temperature Stability (Impedance Ratio @ 120Hz) Z-40°C/Z+20°C Capacitance Change High Temperature Load Life at 105°C 2,000 hrs φD > 10mm Tan δ 1,000 hrs φD = 8mm Leakage Current 200 250 400 10 ~ 68 3.3 ~ 47 2.2 ~ 22 -40 ~ +105°C ±20% (M) 0.03CV + 15µA 0.02CV + 25µA 0.20 0.20 0.20 0.25 3 3 3 6 6 6 6 10 Within ±25% of initial measured value Less than 200% of specified value Less than the specified value MAXIMUM ESR MAXIMUM RIPPLE CURRENT (mA rms AT 120Hz AND 105°C) (Ω AT 120Hz AND 20°C) Working Voltage Cap. (µF) 160 200 250 400 2.2 25 3.3 31 36 4.7 37 38 6.8 44 47 10 57 64 64 57 22 112 112 112 115 33 137 137 150 47 180 180 180 68 215 215 82 235 - STANDARD PRODUCTS AND CASE SIZES (mm) Working Voltage 160 200 250 400 188.5 100.5 125.7 70.6 88.2 48.8 61.0 33.2 33.2 33.2 41.5 15.1 15.1 15.1 18.8 10.1 10.1 10.1 7.1 7.1 7.1 4.9 4.9 4.0 - Cap. (µF) 2.2 3.3 4.7 6.8 10 22 33 47 68 82 Cap. (µF) Code 2.2 3.3 4.7 6.8 10 22 33 47 68 82 2R2 3R3 4R7 6R8 100 220 330 470 680 820 DIMENSIONS (mm) Case Size 8x10.8 10x10.8 12.5x14 16x17 Dφ±0.5 8.0 10.0 12.5 16.0 L max. A±0.2 10.8 8.3 10.8 10.3 14.0 12.8 17.0 16.3 B±0.2 8.3 10.3 12.8 16.3 I±0.2 2.9 3.2 4.5 5.0 W 0.7~1.0 1.1~1.4 1.1~1.4 1.8~2.1 P±0.2 3.2 4.6 4.6 7.0 Working Voltage 160 200 250 8x10.8 8x10.8 8x10.8 8x10.8 10x10.8 10x10.8 12.5x14 12.5x14 12.5x14 12.5x14 12.5x14 16x17 16x17 16x17 16x17 16x17 16x17 16x17 - + Dφ I 400 8x10.8 10x10.8 10x10.8 12.5x14 12.5x14 16x17 - I - W 0.3mm max. A L P PART NUMBER SYSTEM B NACV 100 M 200V 10x10.8 TR 13 F Series RoHS Compliant 97% Sn (min.), 3% Bi (max.) 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20%, K=10% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10mF PRECAUTIONS ® 16 NIC COMPONENTS CORP. Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com