FR101 THRU FR107 1.0AMP. Fast Recovery Rectifiers VOLTAGE:50 TO 1000V CURRENT:1.0A AXIAL LEAD DO-41 Specification Features: Case: Epoxy, Molded Weight: 0.4Gram (Approximately) DEVICE MARKING DIAGRAM High current capability, Low leakage current FR10X KEL High surge current capability Finish: All External Surfaces Corrosion Resistant And Terminal Leads Are Readily Solderable Lead And Mounting Surface Temperature For Soldering Purposed: 260℃ Max. For 10 Seconds 1/16 Inch From Case FR10X : Device Name FR101~ FR107 KEL RoHS Compliant Cathode Indicated By Polarity Band Absolute Maximum Ratings Parameter Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectifier Current. (0.375” Lead Length @ TA=75℃) Non-repetitive Peak Forward Surge Current. (8.3mS Single Half Sine-wave) Operating Junction and Storage Temperature Range Thermal Resistance (Junction to Ambient) (Note 1) Electrical Characteristics TA = 25°C unless otherwise noted FR FR FR Symbol 101 102 103 : KEL Logo FR 104 FR 105 FR 106 FR 107 Units VRRM 50 100 200 400 600 800 1000 V VR 50 100 200 400 600 800 1000 V IF(AV) 1.0 A IFSM 30 A TJ, TSTG -65 to +150 °C RθJA 65 °C/W TA = 25°C unless otherwise noted Parameter Symbol FR 101 FR 102 FR 103 FR 104 FR 105 FR 106 FR 107 Units Reverse Current @VR IR 5 uA Forward Voltage @1A VF 1.3 V Maximum Reverse Recovery Time (Note 2) TRR Total Capacitance @VR=4V, f=1MHz CT 150 250 15 500 nS pF Apr. 2008 Release / Orig Page 1 FR101 through FR107 Series P re lim in ary Da t a S he et P re lim in ary Da t a S he et NOTE: (1) Thermal resistance from junction to ambient at 0.375” lead length, vertical P.C. board mounted (2) Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Package Outline Package Case Outline D C A B DO-41 DO-41 DIM Millimeters Inches Min Max Min Max A 0.69 0.90 0.027 0.034 B 4.20 5.20 0.166 0.205 C 25.40 --- 1.000 --- D 2.00 2.70 0.080 0.107 Apr. 2008 Release / Orig Page 2