TI CC2564-BLUEBRIDGE Bluetooth 4.0 low energy embedded dual mode module from stonestreet one and blueradio - br-le4.0-d2 Datasheet

CC2564-BlueBridge
www.ti.com
SWRS129 – OCTOBER 2012
Bluetooth® 4.0 Low Energy Embedded Dual Mode Module from Stonestreet One and
BlueRadio - BR-LE4.0-D2
FEATURES
1
•
23
•
•
•
•
•
•
•
•
•
•
•
•
Three Types of Models: With or Without RF
Chip Antenna, or U.FL Connector
FCC, IC, CE, RoHS, and Bluetooth® Ver 4.0
Compliant ISM 2.4GHz Band Module. Code
Space in Texas Instruments MSP430 for Client
Applications (100 kB Flash, 4 kB RAM)
Baseband is TI Dual Mode CC2564
UART, SPI Data Interface (2-wire or 4-wire with
CTS, RTS)
Analog, RTC, Battery Monitor, Temperature
Sensor, Watchdog Timer
Includes Integrated Software Stack, Profiles,
and AT Modem Like Commands
Embedded Bluetopia® Bluetooth Stack
Protocols and Profiles Include: SPP, GAP,
GATT, SMP, ATT, L2CAP, BATT, and so on
Combines the Standard BR, EDR Offering with
Additional Support for Bluetooth Low Energy
UART Baud Rate Speeds: 9600 bps up to 1
Mbps
+500 Meter (1640 Feet) Est. Distance Line of
Sight (LOS) with Chip Antenna Running SPP
Software Adjustable Transmit Power from
Short to Long Range Applications (Class1, 2,
and 3)
Low Power Consumption (24 mA TX, 18 mA
RX, 0.1 mA Idle Mode, and 0.2 µA Deep Sleep
Timer)
Small-form Factor SMT Radio Modem that
Requires NO External Components
•
•
Operating Temperature Range: -40°C to
approximately 85ºC.
Secure and Robust Communication Link with
Billions of Unique Codes
– FHSS (Frequency Hopping Spread
Spectrum)
– 24 bit CRC Error Correction for Ensured
Packet Delivery
– AES-128 Bit Encryption Using CCM for
Encryption and Authentication of Packets
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Human Interface Devices
– Keyboard, Mouse, Remote Control
Sports and Leisure Equipment
Mobile Phone Accessories
Remote Control for Computers, MP3 Player
Consumer Electronics
Remote Monitoring and Control
Health Care and Medical
Smart Grid
Automated Meter Reading (AMR)
Home, Building Automation
Machine-to-Machine (M2M)
Wireless Sensor Networks
Wireless Alarms and Security
Lighting and HVAC Control
Proximity and out of Range Detection
DESCRIPTION
BlueBridge BR-LE4.0-D2 is a standalone Dual mode intelligent module solution and requires no external stack or
external components. Custom client applications can be written directly onto the BlueBridge smart ready module,
which supports both analog and digital peripherals, eliminating the need for a second costly microprocessor. It
comes in three types of models with/without RF chip antenna, or U.FL connector and is an FCC, IC, CE, RoHS,
and Bluetooth® Ver 4.0 compliant ISM 2.4 GHz band module.
1
2
3
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated
CC2564-BlueBridge
SWRS129 – OCTOBER 2012
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
DESCRIPTION CONTINUED
More information on the product can be found on BlueRadio’s website:
• Product Overview:
– http://www.blueradios.com/hardware_LE4.0-D2.htm
– http://www.stonestreetone.com/dualmodemodule.cfm
• Data sheet: http://www.stonestreetone.com/pdf/BR-LE4.0-D2A.pdf
More information on TI’s wireless platform solutions for Bluetooth can be found on TI's Wireless Connectivity Wiki
(www.ti.com/connectivitywiki).
2
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Links: CC2564-BlueBridge
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
Similar pages