PulseCore ASM1816R-15 Low power 3.3v/3.0v î¼p reset, active low, open-drain output Datasheet

ASM1816
November 2006
rev 1.6
Low Power 3.3V/3.0V µP Reset, Active LOW, Open-Drain Output
General Description
Applications
The ASM1816 is a voltage supervisory device with low-power,
•
Set-top boxes
3.3V/3V µP Reset, active LOW, open-drain output. Maximum
•
Cellular phones
supply current over temperature is a low 15µA (at 3.6V).
•
PDAs
•
Energy management systems
The ASM1816 generates an active LOW reset signal whenever
•
Embedded control systems
the monitored supply is out of tolerance. A precision reference
•
Printers
and comparator circuit monitor power supply (VCC) level.
Tolerance level options are 5%, 10%, 15% and 20%. When an
•
Single board computers
out-of-tolerance condition is detected, an internal power-fail
Typical Application
signal is generated which forces an active LOW reset signal.
After VCC returns to an in-tolerance condition, the reset signal
VCC
remains active for 150ms to allow the power supply and system
microprocessor to stabilize.
ASM1816
The ASM1816 is designed with a open-drain output stage and
Microprocessor
operates over the extended industrial temperature range.
Devices are available in TO-92 and compact surface mount
RESET
SOT-23 packages.
RESET
GND
Other low power products in this family include the ASM1810/
11/12/15/17, ASM1233D and ASM1233M.
Key Features
•
Block Diagram
Low Supply Current
VCC
2
•20 µA maximum (5.5 V)
•15µA maximum (3.6 V)
•
Automatically restarts a microprocessor after power failure
•
150ms reset delay after VCC returns to an in-tolerance con-
ASM1816
Supply
Tolerance
Bias
1
dition
+
•
Active LOW power-up reset
-
•
Precision temperature-compensated voltage reference and
comparator
•
Eliminates external components
•
TO-92 and compact surface mount SOT-23 package
•
Operating temperature -40°C to +85°C
5.0KΩ
RESET
Delay
150ms
Typical
Reference
3
GND
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200 Campbell, Alliance
CA 95008
• Tel: 408-879-9077 • Fax: 408-879-9018
Semiconductor
2575 Augustine Drive . Santa Clara,
CA 95054 . Tel: 408.855.4900 . Fax: 408.855.4999 . www.alsc.com
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice
ASM1816
November 2006
rev 1.6
Pin Configuration
TO-92
SOT-23
RESET
ASM1816
1
ASM1816-R
VCC
3
GND
2
1
2
3
Pin Description
TO-92
SOT-23
Pin #
Pin #
1
Pin Name
Description
1
RESET
Active LOW reset output
2
2
VCC
Power supply input
3
3
GND
Ground
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
2 of 9
ASM1816
November 2006
rev 1.6
VCCTP (MAX)
Operation - Power Monitor
The
ASM1816
detects
tF
VCC
Application Information
out-of-tolerance
power
VCCTP
supply
VCCTP (MIN)
conditions. It resets a processor during power-up, powermonitored power supply voltage is below the reset threshold.
When an out-of-tolerance VCC voltage is detected, the
RESET
RESET signal is asserted. On power-up, RESET is kept
tRPD
~
~
down and issues a reset to the system processor when the
active (LOW) for approximatley 150ms after the power supply
voltage has reached the selected tolerance. This allows the
power supply and microprocessor to stablize before RESET
is released.
VOL
tR
Figure 2: Timing Diagram: Power-Down
VCCTP (MAX)
VCCTP (MIN)
~
VCC
VCCTP
tRPU
VOH
~
RESET
Figure 1: Timing Diagram: Power-Up
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
3 of 9
ASM1816
November 2006
rev 1.6
Absolute Maximum Ratings
Parameter
Min
Max
Unit
Voltage on VCC
-0.5
7
V
Voltage on RESET
-0.5
VCC + 0.5
V
Operating Temperature Range
-40
85
°C
260
°C
125
°C
2
200
KV
V
Soldering Temperature (for 10 sec)
Storage Temperature
-55
ESD rating
HBM
MM
NOTE: These are stress ratings only and functional use is not implied. Exposure to absolute maximum ratings for prolonged periods of time may affect device reliability.
Electrical Characteristics
Unless otherwise noted, VCC = 1.2V to 5.5V and specifications are over the operating temperature range of -40°C to +85°C. All voltages are referenced to
ground
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
5.5
V
Supply Voltage
VCC
Output Current
IOL
Output = 0.4V, VCC > 2.7V
Operating Current
ICC
VCC < 5.5V, RESET output open
8
20
µA
Operating Current
ICC
VCC < 3.6V, RESET output open
6
15
µA
1.2
+10
mA
VCC Trip Point (ASM1816R-5)
VCCTP
2.98
3.06
3.15
V
VCC Trip Point (ASM1816R-10)
VCCTP
2.80
2.88
2.97
V
VCC Trip Point (ASM1816R-15)
VCCTP
2.635
2.72
2.805
V
VCC Trip Point (ASM1816R-20)
VCCTP
2.47
2.55
2.64
V
RP
3.5
5.5
7.5
kΩ
10
pF
5
µs
Internal Pull-up Resistor
Output Capacitance
COUT
VCC Detect to RESET Low
tRPD
VCC Slew Rate
(VCCTP (MAX) to VCCTP (MIN)
VCC Slew Rate
(VCCTP (MIN) to VCCTP (MAX)
VCC Detect to RESET High
2
tF
300
µs
tR
0
ns
tRPU
tr = 5µs
100
150
250
ms
Note: The tF value is for reference in defining values for tRPD and should not be considered for proper operation or use.
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
4 of 9
ASM1816
November 2006
rev 1.6
Family Selection Guide
Part #
RESET Voltage (V)
RESET Time
(ms)
Output Stage
RESET Polarity
ASM1810
4.620, 4.370, 4.120
150
Push-Pull
LOW
ASM1811
4.620, 4.350, 4.130
150
Open-Drain
LOW
ASM1812
4.620, 4.350, 4.130
150
Push-Pull
HIGH
ASM1815
3.060, 2.880, 2.550
150
Push-Pull
LOW
ASM1816
3.060, 2.720, 2.880, 2.550
150
Open-Drain
LOW
ASM1817
3.060, 2.880, 2.550
150
Push-Pull
HIGH
ASM1233D
4.625, 4.375, 4.125
350
Open-Drain
LOW
ASM1233M
4.625, 4.375, 2.720
350
Open-Drain
LOW
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
5 of 9
ASM1816
November 2006
rev 1.6
Package Dimension
Plastic SOT-23 (3-Pin)
D
B
E
H
e
S
A
a
C
e1
A1
L
Inches
Millimeters
Min
Max
Min
Max
Plastic SOT-23 (3-Pin)
A
0.030
0.046
0.75
1.17
A1
0.002
0.006
0.05
0.15
B
0.012
0.020
0.30
0.50
C
0.003
0.008
0.08
0.20
D
0.110
0.120
2.80
3.04
E
0.047
0.055
1.20
1.40
e
0.037 BSC
0.95 BSC
e1
0.075 BSC
1.9 BSC
H
0.083
0.104
2.10
2.64
L
0.016
0.024
0.40
0.60
a
o
0
o
8
o
0
8
S
NA
o
NA
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
6 of 9
ASM1816
November 2006
rev 1.6
To-92 (3-Pin)
Dimensions in Inches
Min
Max
Dimensions in Millimeters
Min
Max
TO-92
A
0.175
0.185
4.445
4.699
b
0.016
0.020
0.406
0.508
C
0.014
0.016
0.356
0.406
φD
0.175
0.185
4.445
4.699
E
0.138
0.144
3.505
3.658
e
0.098
0.102
2.489
2.591
e1
0.045
0.055
1.143
1.397
j
0.168
0.174
4.269
4.420
L
0.500
0.585
12.7
14.86
s
0.095
0.099
2.413
2.515
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
7 of 9
ASM1816
November 2006
rev 1.6
Ordering Information
Device Summary
Part ***
Number
RESET
Output
Voltage
(V)
RESET
Tolerance
(%)
RESET
Time
(ms)
Open-Drain **
Output Stage
SOT-23
Package
RESET
Polarity
Package Marking
TIN - LEAD DEVICES
ASM1816R-5
3.06
5
150
‹
‹
LOW
RMLL
ASM1816R-10
2.88
10
150
‹
‹
LOW
RNLL
ASM1816R-15
2.72
15
150
‹
‹
LOW
RZLL
ASM1816R-20
2.55
20
150
‹
‹
LOW
ROLL
LEAD FREE DEVICES
ASM1816R-5F
3.06
5
150
‹
‹
LOW
KMLL
ASM1816R-10F
2.88
10
150
‹
‹
LOW
KNLL
ASM1816R-15F
2.72
15
150
‹
‹
LOW
KZLL
ASM1816R-20F
2.55
20
150
‹
‹
LOW
KOLL
Part ***
Number
RESET
Output
Voltage
(V)
RESET
Tolerance
(%)
RESET
Time
(ms)
Open-Drain **
Output Stage
TO-92
Package
RESET
Polarity
Package Marking
TIN - LEAD DEVICES
ASM1816-5
3.06
5
150
‹
‹
LOW
ASM1816-5
ASM1816-10
2.88
10
150
‹
‹
LOW
ASM1816-10
ASM1816-20
2.55
20
150
‹
‹
LOW
ASM1816-20
LEAD FREE DEVICES
ASM1816-5F
3.06
5
150
‹
‹
LOW
ASM1816-5F
ASM1816-10F
2.88
10
150
‹
‹
LOW
ASM1816-10F
ASM1816-20F
2.55
20
150
‹
‹
LOW
ASM1816-20F
** Internal 5.5kΩ resistor pull-up
** *Add /T to Part Number for Tape and Reel (i.e ASM18xx-x/T)
LL - Lot Code
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
8 of 9
ASM1816
November 2006
rev 1.6
PulseCore Semiconductor Corporation
1715 S, Bascom Ave Suit 200
Campbell, CA 95008.
Tel: 408 - 879 - 9077
Fax: 408 - 879 - 9018
www.pulsecoresemi.com
Copyright © PulseCore Semiconductor
All Rights Reserved
Part Number: ASM1816
Document Version: 1.6
© Copyright 2006 PulseCore Semiconductor Corporation. All rights reserved. Our logo and name are trademarks or registered trademarks of
PulseCore Semiconductor. All other brand and product names may be the trademarks of their respective companies. PulseCore reserves the right
to make changes to this document and its products at any time without notice. PulseCore assumes no responsibility for any errors that may appear
in this document. The data contained herein represents PulseCore’s best data and/or estimates at the time of issuance. PulseCore reserves the
right to change or correct this data at any time, without notice. If the product described herein is under development, significant changes to these
specifications are possible. The information in this product data sheet is intended to be general descriptive information for potential customers and
users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. PulseCore does not assume any
responsibility or liability arising out of the application or use of any product described herein, and disclaims any express or implied warranties
related to the sale and/or use of PulseCore products including liability or warranties related to fitness for a particular purpose, merchantability, or
infringement of any intellectual property rights, except as express agreed to in PulseCore’s Terms and Conditions of Sale (which are available from
PulseCore). All sales of PulseCore products are made exclusively according to PulseCore’s Terms and Conditions of Sale. The purchase of
products from PulseCore does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any other intellectual
property rights of PulseCore or third parties. PulseCore does not authorize its products for use as critical components in life-supporting systems
where a malfunction or failure may reasonably be expected to result in significant injury to the user, and the inclusion of PulseCore products in such
life-supporting systems implies that the manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising
from such use.
Low Power 3.3V/3.0V µP Reset
9 of 9
Similar pages