FRF1220A thru FRF1260A Pb FRF1220A/FRF1240A/FRF1260A Pb Free Plating Product 12.0 Ampere Insulated Dual Common Anode Fast Recovery Rectifiers ITO-220AB(TO-220F-3L) Unit:inch(mm) .189(4.8) .165(4.2) .272(6.9) .248(6.3) .406(10.3) .381(9.7) .134(3.4) .118(3.0) .130(3.3) .114(2.9) Application ※ Automotive Inverters and Solar Inverters ※ Car Audio Amplifiers and Sound Device Systems ※ Plating Power Supply,Motor Control,UPS and SMPS etc. .161(4.1)MAX .071(1.8) .055(1.4) .055(1.4) .039(1.0) .035(0.9) .011(0.3) Mechanical Data ※ Case: Full Plastic Isolated Package ITO-220AB ※ Epoxy: UL 94V-0 rate flame retardant ※ Terminals: Solderable per MIL-STD-202 method 208 ※ Polarity: As marked on diode body ※ Mounting position: Any ※ Weight: 2.0 gram approximately Case Positive Common Cathode Suffix "C" .1 .1 (2.55) (2.55) .543(13.8) .512(13.0) .606(15.4) .583(14.8) .112(2.85) .100(2.55) Features ※ Fast switching for high efficiency ※ Low forward voltage drop ※ High current capability ※ Low reverse leakage current ※ High surge current capability Case Negative Common Anode Suffix "A" .114(2.9) .098(2.5) .032(.8) MAX Case Doubler Tandem Polarity Suffix "D" Case Series Tandem Polarity Suffix "S" MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase,half wave,60Hz,resistive or inductive load. For capacitive load, derate current by 20%. FRF1220C FRF1220A FRF1220D FRF1220S FRF1240C FRF1240A FRF1240D FRF1240S FRF1260C FRF1260A FRF1260D FRF1260S PARAMETER SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage VRRM VRMS VDC Maximum Average Forward Rectified Current Tc=100°C (Total Device 2x6.0A=12.0A) IF(AV) 12.0 A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) IFSM 100 A Maximum Instantaneous Forward Voltage @5.0A (Per Diode/Per Leg) VF Maximum DC Reverse Current @TJ=25°C At Rated DC Blocking Voltage @TJ=125°C IR 5.0 100 μA μA Maximum Reverse Recovery Time (Note1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Trr CJ RθJC 35 65 3.0 nS pF °C/W Operating Junction and Storage Temperature Range TJ,TSTG -55 to +150 °C 200 140 200 0.98 400 280 400 1.3 600 420 600 1.7 UNIT V V V V Note:(1)Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. Note:(2)Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. Note:(3)Thermal Resistance junction to case. Rev.08T © 1995 Thinki Semiconductor Co., Ltd. Page 1/2 http://www.thinkisemi.com.tw/ FRF1220A thru FRF1260A FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 12 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 100 60 Hz Resistive or Inductive load Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 80 60 40 20 0 0 50 100 150 1 CASE TEMPERATURE, C 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 50 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 NUMBER OF CYCLES AT 60Hz o FRF1220A FRF1220A 5 FRF1220A 1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 o TJ=125 C 100 10 o TJ=25 C 1 0.1 0 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 1000 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS Rev.08T © 1995 Thinki Semiconductor Co., Ltd. Page 2/2 http://www.thinkisemi.com.tw/