This version: Mar. 8. 1999 Semiconductor MSC2343657D-xxBS10/DS10 4,194,304-word x 36-bit DYNAMIC RAM MODULE : FAST PAGE MODE TYPE WITH EDO DESCRIPTION The MSC2343657D-xxBS10/DS10 is a fully decoded, 4,194,304-word x 36-bit CMOS dynamic random access memory module composed of eight 16Mb DRAMs (4Mx4) in SOJ packages and two 8Mb DRAMs (4Mx2) in SOJ packages mounted with ten decoupling capacitors on a 72-pin glass epoxy single in-line package. This module supports any application where high density and large capacity of storage memory are required. FEATURES · 4,194,304-word x 36-bit organization · 72-pin Single In-Line Memory Module MSC2343657D-xxBS10 : Gold tab MSC2343657D-xxDS10 : Solder tab · Single +5V supply ± 10% tolerance · Input : TTL compatible · Output : TTL compatible, 3-state · Refresh : 2048cycles/32ms · /CAS before /RAS refresh, hidden refresh, /RAS only refresh capability · Fast page mode with EDO capability · Multi-bit test mode capability PRODUCT FAMILY tRAC tAA tCAC Cycle Time (Min.) MSC2343657D-60BS10/DS10 60ns 30ns 15ns 110ns 5720mW MSC2343657D-70BS10/DS10 70ns 35ns 20ns 130ns 5225mW Access Time (Max.) Family Power Dissipation Operating (Max.) Standby (Max.) 55mW Semiconductor MSC2343657D MODULE OUTLINE (Unit : mm) MSC2343657D-xxBS10/DS10 5.28Max. 107.95±0.2*1 101.19Typ. 3.38Typ. φ3.18 25.4±0.2 Typ. Typ. 10.16 6.35 2.03Typ. 6.35Typ. 1 72 1.27±0.1 R1.57 6.35 1.04Typ. 95.25 *1 The common size difference of the board width 12.5mm of its height is specified as ±0.2. The value above 12.5mm is specified as ±0.5. 3.17Min. +0.1 1.27 -0.08 Semiconductor MSC2343657D PIN CONFIGURATION Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name 1 VSS 19 A10 37 DQ17 55 DQ12 2 DQ0 20 DQ4 38 DQ35 56 DQ30 3 DQ18 21 DQ22 39 VSS 57 DQ13 4 DQ1 22 DQ5 40 /CAS0 58 DQ31 5 DQ19 23 DQ23 41 /CAS2 59 VCC 6 DQ2 24 DQ6 42 /CAS3 60 DQ32 7 DQ20 25 DQ24 43 /CAS1 61 DQ14 8 DQ3 26 DQ7 44 /RAS0 62 DQ33 9 DQ21 27 DQ25 45 NC 63 DQ15 10 VCC 28 A7 46 NC 64 DQ34 11 NC 29 NC 47 /WE 65 DQ16 12 A0 30 VCC 48 NC 66 NC 13 A1 31 A8 49 DQ9 67 PD1 14 A2 32 A9 50 DQ27 68 PD2 15 A3 33 NC 51 DQ10 69 PD3 16 A4 34 /RAS2 52 DQ28 70 PD4 17 A5 35 DQ26 53 DQ11 71 NC 18 A6 36 DQ8 54 DQ29 72 VSS Presence Detect Pins Pin No. Pin Name MSC2343657D -60BS10/DS10 MSC2343657D -70BS10/DS10 67 PD1 VSS VSS 68 PD2 NC NC 69 PD3 NC VSS 70 PD4 NC NC Semiconductor MSC2343657D BLOCK DIAGRAM A0-A10 /RAS0 /CAS0 /WE /RAS2 /CAS2 A0-A10 /RAS /CAS /WE DQ DQ DQ DQ /OE VSS DQ0 DQ1 DQ2 DQ3 DQ DQ DQ DQ /OE VSS DQ4 DQ5 DQ6 DQ7 A0-A10 DQ1 /RAS DQ2 /CAS1 /CAS2 /WE /OE VCC VSS A0-A10 /RAS /CAS /WE VCC A0-A10 /RAS /CAS /WE VCC VCC A0-A10 /RAS /CAS /WE VCC /CAS1 DQ DQ DQ DQ /OE VSS DQ18 DQ19 DQ20 DQ21 DQ DQ DQ DQ /OE VSS DQ22 DQ23 DQ24 DQ25 DQ8 DQ17 A0-A10 DQ1 /RAS DQ2 /CAS1 /CAS2 /WE /OE VCC VSS DQ26 DQ35 DQ DQ DQ DQ /OE VSS DQ9 DQ10 DQ11 DQ12 A0-A10 /RAS /CAS /WE DQ DQ DQ DQ /OE VSS DQ27 DQ28 DQ29 DQ30 DQ DQ DQ DQ /OE VSS DQ13 DQ14 DQ15 DQ16 DQ DQ DQ DQ /OE VSS DQ31 DQ32 DQ33 DQ34 VCC A0-A10 /RAS /CAS /WE VCC VCC A0-A10 /RAS /CAS /WE VCC /CAS3 VCC VSS A0-A10 /RAS /CAS /WE C1-C10 Semiconductor MSC2343657D ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Parameter Symbol Rating Unit VIN, VOUT -0.5 to +7.0 V Voltage on VCC Supply Relative to VSS VCC -0.5 to +7.0 V Short Circuit Output Current IOS 50 mA Power Dissipation PD * 10 W Operating Temperature TOPR 0 to +70 °C Storage Temperature TSTG -40 to +125 °C Voltage on Any Pin Relative to VSS * Ta = 25°C Recommended Operating Conditions ( Ta = 0°C to +70°C ) Parameter Symbol Min. Typ. Max. Unit VCC 4.5 5.0 5.5 V VSS 0 0 0 V Input High Voltage VIH 2.4 - VCC + 0.5 V Input Low Voltage VIL -0.5 - 0.8 V Power Supply Voltage Capacitance ( VCC = 5V ± 10%, Ta = 25°C, f = 1 MHz ) Parameter Symbol Typ. Max. Unit Input Capacitance (A0 - A10) CIN1 - 70 pF Input Capacitance (/WE) CIN2 - 80 pF Input Capacitance (/RAS0, /RAS2) CIN3 - 43 pF Input Capacitance (/CAS0- /CAS3) CIN4 - 28 pF I/O Capacitance (DQ0 - DQ35) CDQ - 16 pF Semiconductor MSC2343657D DC CHARACTERISTICS (VCC = 5V ± 10%, Ta = 0°C to +70°C ) Parameter Symbol Condition MSC2343657D -60BS10/DS10 MSC2343657D -70BS10/DS10 Min. Max. Min. Max. Unit Note Input Leakage Current ILI 0V ≤ VIN ≤ 6.5V; All other pins not under test = 0V -100 100 -100 100 µA Output Leakage Current ILO DQ disable 0V ≤ VOUT ≤ 5.5V -10 10 -10 10 µA Output High Voltage VOH IOH = -5.0mA 2.4 VCC 2.4 VCC V Output Low Voltage VOL IOL = 4.2mA 0 0.4 0 0.4 V Average Power Supply Current (Operating) ICC1 /RAS, /CAS cycling, tRC = Min. - 1040 - 950 mA 1, 2 /RAS, /CAS = VIH - 20 - 20 mA 1 /RAS, /CAS ≥ VCC -0.2V - 10 - 10 mA 1 Power supply current (Standby) ICC2 Average Power Supply Current (/RAS only refresh) ICC3 /RAS cycling, /CAS = VIH, tRC = Min. - 1040 - 950 mA 1, 2 Average Power Supply Current (/CAS before /RAS refresh) ICC6 /RAS cycling, /CAS before /RAS - 1040 - 950 mA 1, 2 Average Power Supply Current (Fast Page Mode) ICC7 /RAS = VIL, /CAS cycling, tHPC = Min. - 920 - 830 mA 1, 3 Notes: 1. ICC Max. is specified as ICC for output open condition. 2. Address can be changed once or less while /RAS = VIL. 3. Address can be changed once or less while /CAS = VIH. Semiconductor MSC2343657D AC CHARACTERISTICS (1/2) (VCC = 5V ± 10%, Ta = 0°C to +70°C ) Note: 1, 2, 3, 10, 11 Parameter Symbol MSC2343657D -60BS10/DS10 MSC2343657D -70BS10/DS10 Min. Max. Min. Max. Unit Note Random Read or Write Cycle Time tRC 110 - 130 - ns Fast Page Mode Cycle Time tHPC 25 - 30 - ns Access Time from /RAS tRAC - 60 - 70 ns 4, 5, 6 Access Time from /CAS tCAC - 15 - 20 ns 4, 5 Access Time from Column Address tAA - 30 - 35 ns 4, 6 Access Time from /CAS Precharge t CPA - 35 - 40 ns 4 Output Low Impedance Time from /CAS tCLZ 0 - 0 - ns 4 Data Output Hold After /CAS Low tDOH 5 - 5 - ns /CAS to Data Output Buffer Turn-off Delay Time tCEZ 0 15 0 15 ns 7, 8 /RAS to Data Output Buffer Turn-off Delay Time tREZ 0 15 0 15 ns 7, 8 /WE to Data Output Buffer Turn-off Delay Time tWEZ 0 15 0 15 ns 7 Transition Time tT 2 50 2 50 ns 3 Refresh Period tREF - 32 - 32 ms /RAS Precharge Time tRP 40 - 50 - ns /RAS Pulse Width tRAS 60 10K 70 10K ns /RAS Pulse Width (Fast Page Mode with EDO) tRASP 60 100K 70 100K ns /RAS Hold Time tRSH 15 - 20 - ns /CAS Precharge Time (Fast Page Mode with EDO) tCP 10 - 10 - ns /CAS Pulse Width tCAS 10 10K 13 10K ns /CAS Hold Time tCSH 40 - 45 - ns /CAS to /RAS Precharge Time tCRP 10 - 10 - ns /RAS Hold Time from /CAS Precharge tRHCP 35 - 40 - ns /RAS to /CAS Delay Time tRCD 20 45 20 50 ns 5 /RAS to Column Address Delay Time tRAD 15 30 15 35 ns 6 Row Address Set-up Time tASR 0 - 0 - ns Row Address Hold Time tRAH 10 - 13 - ns Column Address Set-up Time tASC 0 - 0 - ns Column Address Hold Time tCAH 10 - 15 - ns Column Address to /RAS Lead Time tRAL 30 - 35 - ns Read Command Set-up Time tRCS 0 - 0 - ns Read Command Hold Time tRCH 0 - 0 - ns 9 Read Command Hold Time referenced to /RAS tRRH 0 - 0 - ns 9 Semiconductor MSC2343657D AC Characteristics (2/2) (VCC = 5V ± 10%, Ta = 0°C to +70°C ) Note: 1, 2, 3, 10, 11 Parameter Symbol MSC2343657D -60BS10/DS10 MSC2343657D -70BS10/DS10 Min. Max. Min. Max. Unit Write Command Set-up Time tWCS 0 - 0 - ns Write Command Hold Time tWCH 10 - 15 - ns Write Command Pulse Width tWP 10 - 10 - ns /WE Pulse Width (DQ Disable) tWPE 10 - 10 - ns Write Command to /RAS Lead Time tRWL 15 - 20 - ns Write Command to /CAS Lead Time tCWL 15 - 20 - ns Data-in Set-up Time tDS 0 - 0 - ns Data-in Hold Time tDH 15 - 15 - ns /CAS Active Delay Time from /RAS Precharge tRPC 10 - 10 - ns /RAS to /CAS Set-up Time (/CAS before /RAS) tCSR 10 - 10 - ns /RAS to /CAS Hold Time (/CAS before /RAS) tCHR 20 - 20 - ns /WE to /RAS Precharge Time (/CAS before /RAS) tWRP 10 - 10 - ns /WE Hold Time from /RAS (/CAS before /RAS) tWRH 10 - 10 - ns /RAS to /WE Set-up Time (Test Mode) tWTS 10 - 10 - ns /RAS to /WE Hold Time (Test Mode) tWTH 20 - 20 - ns Note Semiconductor MSC2343657D Notes: 1. A start-up delay of 200µs is required after power-up, followed by a minimum of eight initialization cycles (/RAS only refresh or /CAS before /RAS refresh) before proper device operation is achieved. 2. The AC characteristics assumes tT = 5ns. 3. VIH(Min.) and VIL(Max.) are reference levels for measuring input timing signals. Transition time (tT) are measured between VIH and VIL. 4. This parameter is measured with a load circuit equivalent to 2TTL loads and 100pF. 5. Operation within the tRCD(Max.) limit ensures that tRAC(Max.) can be met. tRCD(Max.) is specified as a reference point only. If tRCD is greater than the specified tRCD(Max.) limit, then the access time is controlled by tCAC. 6. Operation within the tRAD(Max.) limit ensures that tRAC(Max.) can be met. tRAD(Max.) is specified as a reference point only. If tRAD is greater than the specified tRAD(Max.) limit, then the access time is controlled by tAA. 7. tCEZ(Max.), tREZ(Max.) and tWEZ(Max.) define the time at which the output achieves the open circuit condition and are not referenced to output voltage levels. 8. tCEZ and tREZ must be satisfied for open circuit condition. 9. tRCH or tRRH must be satisfied for a read cycle. 10. The test mode is initiated by performing a /WE and /CAS before /RAS refresh cycle. This mode is latched and remains in effect until the exit cycle is generated. The test mode specified in this data sheet is an 8-bit parallel test function. CA0, CA1 and CA10 are not used. In a read cycle, if all internal bits are equal, the DQ pin will indicate a high level. If any internal bits are not equal, the DQ pin will indicate a low level. The test mode is cleared and the memory device returned to its normal operating state by a /RAS only refresh or /CAS before /RAS refresh cycle. 11. In a test mode read cycle, the value of access time parameters is delayed for 5ns for the specified value. These parameters should be specified in test mode cycle by adding the above value to the specified value in this data sheet.