LM4250 LM4250 Programmable Operational Amplifier Literature Number: SNOSC17A LM4250 Programmable Operational Amplifier General Description Features The LM4250 and LM4250C are extremely versatile programmable monolithic operational amplifiers. A single external master bias current setting resistor programs the input bias current, input offset current, quiescent power consumption, slew rate, input noise, and the gain-bandwidth product. The device is a truly general purpose operational amplifier. The LM4250C is identical to the LM4250 except that the LM4250C has its performance guaranteed over a 0˚C to +70˚C temperature range instead of the −55˚C to +125˚C temperature range of the LM4250. n n n n n n n n ± 1V to ± 18V power supply operation 3 nA input offset current Standby power consumption as low as 500 nW No frequency compensation required Programmable electrical characteristics Offset voltage nulling capability Can be powered by two flashlight batteries Short circuit protection Connection Diagrams Metal Can Package Dual-In-Line Package DS009300-5 Top View DS009300-2 Top View X5 Difference Amplifier 500 Nano-Watt X10 Amplifier DS009300-4 DS009300-3 Quiescent PD = 500 nW Quiescent PD = 0.6 mW © 2000 National Semiconductor Corporation DS009300 www.national.com LM4250 Programmable Operational Amplifier August 2000 LM4250 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. (Note 3) LM4250 LM4250C ± 18V ± 18V Operating Temp. Range −55˚C ≤ TA ≤ +125˚C 0˚C ≤ TA ≤ +70˚C Differential Input Voltage ± 30V ± 15V ± 30V ± 15V Supply Voltage Input Voltage (Note 2) ISET Current Output Short Circuit Duration 150 nA 150 nA Continuous Continuous 150˚C 100˚C 150˚C 100˚C TJMAX H-Package N-Package J-Package 100˚C M-Package 100˚C Power Dissipation at TA = 25˚C H-Package (Still Air) (400 LF/Min Air Flow) 500 mW 300 mW 1200 mW 1200 mW N-Package J-Package 500 mW 1000 mW M-Package 600 mW 350 mW Thermal Resistance (Typical) θJA H-Package (Still Air) (400 LF/Min Air Flow) 165˚C/W 65˚C/W N-Package J-Package 165˚C/W 65˚C/W 130˚C/W 108˚C/W M-Package 108˚C/W 190˚C/W (Typical) θJC H-Package Storage Temperature Range 21˚C/W 21˚C/W −65˚C to +150˚C −65˚C to +150˚C Soldering Information Dual-In-Line Package Soldering (10 seconds) 260˚C Small Outline Package Vapor Phase (60 seconds) 215˚C Infrared (15 seconds) 220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices. ESD tolerance (Note 4) 800V Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. Note 2: For supply voltages less than ± 15V, the absolute maximum input voltage is equal to the supply voltage. Note 3: Refer to RETS4250X for military specifications. Note 4: Human body model, 1.5 kΩ in series with 100 pF. www.national.com 2 LM4250 Resistor Biasing Set Current Setting Resistor to V− ISET VS 0.1 µA 0.5 µA 1.0 µA 5 µA 10 µA ± 1.5V ± 3.0V ± 6.0V ± 9.0V ± 12.0V ± 15.0V 25.6 MΩ 5.04 MΩ 2.5 MΩ 492 kΩ 244 kΩ 55.6 MΩ 11.0 MΩ 5.5 MΩ 1.09 MΩ 544 kΩ 116 MΩ 23.0 MΩ 11.5 MΩ 2.29 MΩ 1.14 MΩ 176 MΩ 35.0 MΩ 17.5 MΩ 3.49 MΩ 1.74 MΩ 236 MΩ 47.0 MΩ 23.5 MΩ 4.69 MΩ 2.34 MΩ 296 MΩ 59.0 MΩ 29.5 MΩ 5.89 MΩ 2.94 MΩ Electrical Characteristics LM4250 (−55˚C ≤ TA ≤ +125˚C unless otherwise specified.) TA = TJ VS = ± 1.5V Parameter ISET = 1 µA Conditions Min ISET = 10 µA Max Min Max VOS RS ≤ 100 kΩ, TA = 25˚C 3 mV 5 mV IOS TA = 25˚C 3 nA 10 nA Ibias TA = 25˚C 7.5 nA 50 nA Large Signal Voltage RL = 100 kΩ, TA = 25˚C Gain VO = ± 0.6V, RL = 10 kΩ 40k 50k Supply Current TA = 25˚C 7.5 µA 80 µA Power Consumption TA = 25˚C 23 µW 240 µW VOS RS ≤ 100 kΩ 4 mV 6 mV TA = +125˚C 5 nA 10 nA TA = −55˚C 3 nA 10 nA IOS Ibias 7.5 nA ± 0.6V Input Voltage Range Large Signal Voltage Gain VO = ± 0.5V, RL = 100 kΩ 50 nA ± 0.6V 30k RL = 10 kΩ Output Voltage Swing 30k ± 0.6V RL = 100 kΩ ± 0.6V RL = 10 kΩ Common Mode Rejection Ratio RS ≤ 10 kΩ 70 dB Supply Voltage Rejection Ratio RS ≤ 10 kΩ 76 dB Supply Current 70 dB 76 dB 8 µA 90 µA VS = ± 15V Parameter Conditions ISET = 1 µA Min Max ISET = 10 µA Min Max VOS RS ≤ 100 kΩ, TA = 25˚C 3 mV 5 mV IOS TA = 25˚C 3 nA 10 nA Ibias TA = 25˚C 7.5 nA 50 nA Large Signal Voltage RL = 100 kΩ, TA = 25˚C Gain VO = ± 10V, RL = 10 kΩ Supply Current TA = 25˚C 10 µA 90 µA Power Consumption TA = 25˚C 300 µW 2.7 mW VOS RS ≤ 100 kΩ 4 mV 6 mV IOS TA = +125˚C 25 nA 25 nA TA = −55˚C 3 nA 10 nA 100k 100k Ibias 7.5 nA ± 13.5V Input Voltage Range 3 50 nA ± 13.5V www.national.com LM4250 Electrical Characteristics (Continued) VS = ± 15V Parameter Conditions ISET = 1 µA Min Large Signal Voltage VO = ± 10V, RL = 100 kΩ Gain RL = 10 kΩ Output Voltage Swing RL = 100 kΩ ISET = 10 µA Max Min Max 50k 50k ± 12V ± 12V RL = 10 kΩ Common Mode Rejection Ratio RS ≤ 10 kΩ 70 dB Supply Voltage Rejection Ratio RS ≤ 10 kΩ 76 dB Supply Current Power Consumption 70 dB 76 dB 11 µA 100 µA 330 µW 3 mW Electrical Characteristics LM4250C (0˚C ≤ TA ≤ +70˚C unless otherwise specified.) TA = TJ VS = ± 1.5V Parameter ISET = 1 µA Conditions Min ISET = 10 µA Max Min Max VOS RS ≤ 100 kΩ, TA = 25˚C 5 mV 6 mV IOS TA = 25˚C 6 nA 20 nA Ibias TA = 25˚C 10 nA 75 nA Large Signal Voltage Gain RL = 100 kΩ, TA = 25˚C 25k VO = ± 0.6V, RL = 10 kΩ Supply Current 25k TA = 25˚C 8 µA 90 µA Power Consumption TA = 25˚C 24 µW 270 µW VOS RS ≤ 10 kΩ 6.5 mV 7.5 mV IOS 8 nA 25 nA Ibias 10 nA 80 nA ± 0.6V Input Voltage Range Large Signal Voltage VO = ± 0.5V, RL = 100 kΩ Gain RL = 10 kΩ Output Voltage Swing ± 0.6V 25k 25k ± 0.6V RL = 100 kΩ ± 0.6V RL = 10 kΩ Common Mode Rejection Ratio RS ≤ 10 kΩ 70 dB 70 dB Supply Voltage Rejection Ratio RS ≤ 10 kΩ 74 dB 74 dB Supply Current Power Consumption 8 µA 90 µA 24 µW 270 µW VS = ± 15V Parameter Conditions ISET = 1 µA Min VOS RS ≤ 100 kΩ, TA = 25˚C Max ISET = 10 µA Min Max 5 mV 6 mV IOS TA = 25˚C 6 nA 20 nA Ibias TA = 25˚C 10 nA 75 nA Large Signal Voltage RL = 100 kΩ, TA = 25˚C Gain VO = ± 10V, RL = 10 kΩ Supply Current TA = 25˚C 11 µA Power Consumption TA = 25˚C 330 µW 3 mW VOS RS ≤ 100 kΩ 6.5 mV 7.5 mV IOS 8 nA 25 nA Ibias 10 nA 80 nA www.national.com 4 60k 60k 100 µA LM4250 Electrical Characteristics (Continued) VS = ± 15V Parameter Conditions ISET = 1 µA Min Max ± 13.5V Input Voltage Range Large Signal Voltage VO = ± 10V, RL = 100 kΩ Gain RL = 10 kΩ Output Voltage Swing RL = 100 kΩ ISET = 10 µA Min Max ± 13.5V 50k 50k ± 12V ± 12V RL = 10 kΩ Common Mode Rejection Ratio RS ≤ 10 kΩ 70 dB Supply Voltage Rejection Ratio RS ≤ 10 kΩ 74 dB Supply Current Power Consumption 70 dB 74 dB 11 µA 100 µA 330 µW 3 mW Typical Performance Characteristics Input Bias Current vs ISET Input Bias Current vs Temperature Input Offset Current vs Temperature DS009300-15 DS009300-16 Unnulled Input Offset Voltage Change vs ISET Unnulled Input Offset Voltage Change vs Temperature DS009300-18 DS009300-17 Peak to Peak Output Voltage Swing vs Load Resistance DS009300-20 DS009300-19 5 www.national.com LM4250 Typical Performance Characteristics Peak to Peak Output Voltage Swing vs Supply Voltage (Continued) Quiescent Current (Iq) vs Temperature Quiescent Current (Iq) vs ISET DS009300-23 DS009300-21 Slew Rate vs ISET DS009300-22 Gain Bandwidth Product vs ISET Open Loop Voltage Gain vs ISET DS009300-24 DS009300-25 Phase Margin vs ISET Input Noise Current (In) and Voltage (En) vs Frequency RSET vs ISET DS009300-27 DS009300-29 DS009300-28 www.national.com DS009300-26 6 LM4250 Typical Applications X5 Difference Amplifier 500 Nano-Watt X10 Amplifier DS009300-4 DS009300-3 Quiescent PD = 0.6 mW Quiescent PD = 500 nW Floating Input Meter Amplifier 100 nA full Scale DS009300-8 Quiescent PD = 1.8 µW *Meter movement (0–100 µA, 2 kΩ) marked for 0–100 nA full scale. 7 www.national.com LM4250 Typical Applications (Continued) X100 Instrumentation Amplifier 10 µW DS009300-9 Note 5: Quiescent PD = 10 µW. Note 6: R2, R3, R4, R5, R6 and R7 are 1% resistors. Note 7: R11 and C1 are for DC and AC common mode rejection adjustments. RSET Connected to V− RSET Connected to Ground DS009300-30 DS009300-11 DS009300-10 Transistor Current Sourcing Biasing FET Current Sourcing Biasing DS009300-13 DS009300-12 *R1 limits ISET maximum www.national.com 8 Offset Null Circuit DS009300-14 LM4250 Schematic Diagram DS009300-1 Ordering Information Temperature Range Military Commercial −55˚C ≤ TA ≤ +125˚C 0˚C ≤ TA ≤ +70˚C LM4250CN Package NSC Package Number 8-Pin N08E Molded DIP LM4250CM 8-Pin LM4250CMX Surface Mount M08A 8-Pin LM4250J-MIL J08E Ceramic DIP LM4250CH 8-Pin H08C Metal Can 9 www.national.com LM4250 Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) Order Number LM4250CH NS Package Number H08C Ceramic Dual-In-Line Package (J) Order Number LM4250J-MIL NS Package Number J08A www.national.com 10 LM4250 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Small Outline Package (M) Order Number LM4250CM or LM4250CMX NS Package Number M08A Molded Dual-In-Line Package (N) Order Number LM4250CN NS Package Number N08E 11 www.national.com LM4250 Programmable Operational Amplifier Notes LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: [email protected] www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: [email protected] National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated