1101 Series A1101R09A The A1101R09A is a high-performance, FCC & IC certified radio module that incorporates the Texas Instruments CC1101 transceiver chip in the industry’s smallest package (9 x 16 x 2.5mm). Features Frequency range: 902-928 MHz FCC & IC compliant, shielded package Digital RSSI output Programmable output power up to +10dBm High sensitivity (-112 dBm at 1.2 kBaud, 915 MHz 1% packet error rate) Ultra-small package size 9 x 16 x 2.5mm LGA footprint RoHS compliant Operating temperature -40 to +85C Impedance-controlled, multi-layer PCB 1.8 to 3.6 VDC Low current consumption (15 mA in RX, 1.2 kBaud, 915 MHz) 200 nA sleep mode current consumption Efficient SPI interface; all registers can be programmed with one “burst” transfer Available in tape & reel and matrix tray Benefits Block diagram Minimal RF engineering experience necessary No additional “Intentional Radiator” certification required (FCC CFR 47 Part 15, IC RSS-210) Minimal real estate required Easily implemented on a two layer PCB No additional harmonic filtering required 100% RF-tested in production Common footprint for similar products in family No additional DC decoupling required Integrated analog temperature sensor Excellent receiver selectivity and blocking performance Suitable for frequency hopping systems, thanks to a fast-settling frequency synthesizer with 90 μs settling time Impedance-matched balun for optimized efficiency Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols PLEASE NOTE: Additional information on the Texas Instruments CC1101 device can be found in the company’s latest datasheet release at http://www.ti.com This product is not to be used in any implantable medical device or external medical device intended to regulate or monitor biological functions, including but not limited to devices such as pacemakers, defibrillators, cardiac resynchronization devices, pressure sensors, biochemical stimulators and neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE. Anaren shall not be responsible for any consequential damages arising from the sale or use of this product for any use of this type. The ultimate user of the product assumes all risk of personal injury or death arising from a prohibited use. Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / [email protected] Footprint Product overview The A1101R09A is a high-performance, FCC & IC certified radio module that incorporates the Texas Instruments CC1101 transceiver chip in the industry’s smallest package (9 x 16 x 2.5mm) and is compatible with all TI-approved software stacks. Refer to User’s Manual for additional layout guidelines. Dimensions in mm. With an LGA pad footprint, this module is designed to effortlessly integrate into a wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. The A1101R09A has an RoHS-compliant ENIG finish and is packaged on tape & reel or in matrix trays for high-volume automated manufacturing. Pin diagram Nomenclature DNC = Do Not Connect A 1 2 3 4 5 6 7 Chip series Function Frequency band Form factor Design ID Application Packaging (Anaren) (CC1101, CC110L, CC2500) (R = radio only) (x100MHz) (A = Internal Antenna, C = Connector) (00 = Default) (G = General) (R = Tape/Reel, M = Matrix Tray) Caution! ESD sensitive device. Precautions should be used when handling the device in order to prevent permanent damage. Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / [email protected] 1219a