LED-25W Series– Line Voltage Dimmable Constant Current LED Drivers CCR Mode: ELV & Inc 100-10% Dimmable Black Magic Thermal Advantage™ Plastic Housing Electrical Specifications Input Voltage Range: 120-230 Vac Nom. with dimmer, 100-277 Vac Nom. without dimmer Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V without dimmer Inrush Current: <10 Amps max @ 120Vac, cold start 25ºC Input Current: 0.25 A max 120Vac 60Hz, max load Maximum Power: 25W Current Regulation: ± 5% Over input line variation Load Regulation: ± 8% THD: <20% @ full load, 120V Typical Efficiency 84% at 120Vac Output Protection: Over-Voltage, Over-Current and Short Circuit Protection with Auto Recovery Environmental Specifications Minimum Starting Temp: -30ºC Maximum Case Temp. 90°C Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% Cooling: Convection Sound Rating: Class A Vibration Frequency: 5-55 Hz/2g, 30 minutes Impact Resistance: 1g/s MTBF: 402,000 Hours @ full load per MIL-217F Notice 2 EMC: FCC 47CFR Part 15 Class B compliant Weight: 7.0 oz. (198 g) • Total Power: 25 Watts • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated • IP66 & NEMA4 • High Power Factor ELV Dimming Product Specifications Model Number Output Voltage Output Current Max. Output Typical Range (Vdc) (mA ±4%) Power (W) Efficiency LED25W-72-C0350-TE 36-72 350 25 86% LED25W-48-C0520-TE 24-48 520 25 85% LED25W-36-C0700-TE 18-36 700 25 84% LED25W-24-C1040-TE 12-24 1040 25 83% For use with electronic low voltage dimmers INC Dimming Product Specifications Model Number Output Voltage Output Current Max. Output Typical Range (Vdc) (mA ±4%) Power (W) Efficiency LED25W-72-C0350-LE 36-72 350 25 86% LED25W-48-C0520-LE 24-48 520 25 85% LED25W-36-C0700-LE 18-36 700 25 84% LED25W-24-C1040-LE 12-24 1040 25 83% For use with standard incandescent dimmers Sign Components Manual Class 2: US/Canada US Only E332160 Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Specifications subject to change without notice. Rev 8-25-15 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED25W-LE/TE Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 2 Dimensions - Inches (mm) OUTPUT Red (+) Blue (-) Tc = 90°C max INPUT White (N) Black (L) WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. All wires are stranded with solder dipped ends. Power Factor / Load 1.00 0.90 45% 0.80 40% 0.70 30% 0.20 15% 0.10 10% 0.00 50% 60% 70% 80% Load 90% Typical Efficiency / Load EN 61347 FCC Part 15 Class B EN61000-3-3 Class C 90% 85% 80% 120Vac 277Vac 75% 70% 80% 90% Normalized Output Voltage 100% 110 100 90 80 70 60 50 40 30 20 10 0 0% 50% 60% 70% 80% Load 90% 100% Output Current / Dimmer Conduction Angle Output Current % 95% Efficiency UL8750, CSA-C22.2 CE 20% 0.30 70% 60% UL/CUL EN61000-3-2 25% 0.40 100% 120Vac 277Vac THD PF 0.50 Safety & EMC Compliance 35% 120Vac 277Vac 0.60 THD / Load 50% 100% 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 -TE (ELV) or -LE (Incan) Dimmer Angle (Degrees) UL Conditions of Acceptability See website for additional information Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com