Fox F206R Hcmos 2.5x2mm 1.0 v smd oscillator Datasheet

HCMOS 2.5x2mm 1.0 V SMD Oscillator
Model: F200 SERIES
Rev. 12/2/2010
RoHS Compliant / Pb Free
Page 1 of 2
http://www.foxonline.com/need_a_sample.htm
• PART NUMBER SELECTION Learn More - Internet Required
Part Number
823-Frequency-xxxxx
823A-Frequency-xxxxx
823B-Frequency-xxxxx
823C-Frequency-xxxxx
823D-Frequency-xxxxx
823E-Frequency-xxxxx
823F-Frequency-xxxxx
Model Frequency
Operating
Number Stability1 Temperature (ºC)
±100PPM
-10 ~ +70
F200
-40 ~ +85
F200R ±100PPM
-10 ~ +70
±50PPM
F205
±50PPM
-40 ~ +85
F205R
±25PPM
-10 ~ +70
F206
-40 ~ +85
F206R ±25PPM*
-10 ~ +70
±20PPm*
F208
2.6 Ma x
Frequency
Range (MHz)
1.800 ~ 50.000
1.800 ~ 50.000
1.800 ~ 50.000
1.800 ~ 50.000
1.800 ~ 50.000
1.800 ~ 50.000
1.800 ~ 50.000
#3
#4
T op
V ie w
2.1 m a x
#2
#1
Dot de note s
p in 1 .
• ELECTRICAL CHARACTERISTICS
1.0 Ma x
MAX (unless otherwise noted)
PARAMETERS
Frequency Range (Fo)
Storage Temperature Range (Tstg)
Supply Voltage
(Vdd)
Input Current
(Idd)
1.800 ~ 32.100 MHz
32.100+ ~ 50.000 MHz
Output Symmetry (50% Vdd)
Rise Time (20% ~ 80% Vdd)
1.800 ~ 32.100 MHz
32.100+ ~ 50.000 MHz
Fall Time (80% ~ 20% Vdd)
1.800 ~ 32.100 MHz
32.100+ ~ 50.000 MHz
Output Voltage
(Vol)
(Voh)
Output Current
(Iol)
(Ioh)
Output Load
(HCMOS)
Standby Current
Start-up Time
(Ts)
Output Disable Time 2
Output Enable Time 2
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL)
Termination Finish
1.800 ~ 50.000 MHz
-55ºC ~ +125ºC
1.0V ± 5%
2.5mA
3.5mA
40% ~ 60%
0.78
B ottom
V ie w
#1
#2
0.65
0.68
#4
#3
0.95
5.0nS
3.5nS
5.0nS
3.5nS
20% Vdd
80% Vdd Min
2mA Min
-2mA Min
15pF
5µA
5mS
250nS
5mS
260ºC / 10 Seconds
1
Au
R e c om m e nde d
S o ld e r P a d L a y o u t
0.95
0.8
0.65
0.9
All dimensions are in millimeters.
1
Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, shock,
and vibration. *Excludes shock and vibration.
2
An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.
Notes:
*A 0.01µF capacitor should be placed between Vdd (Pin 4) and GND (Pin 2) to minimize power
supply noise.
*Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may
vary. All specifications subject to change without notice.
P in C o n n e c t io n s
# 1 E /D
#2 GND
# 3 O u t pu t
# 4 V DD
• Enable / Disable Function
OUTPUT (Pin 3)
Pin 1
ACTIVE
OPEN 2
ACTIVE
'1' Level Vih ≥ 70% Vdd
High Z
'0' Level Vil ≤ 30% Vdd
FOXElectronics
5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com
EMEA Tel: +44.11283.568153 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Japan Tel: +81.3.3374/2079 Fax: +81.3.3374.5221
© 2010 FOX ELECTRONICS | ISO9001:2008 Certified
HCMOS 2.5x2mm 1.0 V SMD Oscillator
Model: F200 SERIES
RoHS Compliant / Pb Free
Page 2 of 2
• TAPE SPECIFICATIONS (millimeters)
MODEL
F200 Series
Rev. 12/2/2010
http://www.foxonline.com/need_a_sample.htm
A
∅1.5
FOXElectronics
• REEL SPECIFICATIONS (millimeters)
B
C D E F STD Reel QTY MODEL
F200 Series
4.0 4.0 3.5 8.0 1.15
3,000
G
I
J
K
L M
H
2.0 ∅13 ∅21 ∅60 ∅180 9.0 2.0
5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com
EMEA Tel: +44.11283.568153 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Japan Tel: +81.3.3374/2079 Fax: +81.3.3374.5221
© 2010 FOX ELECTRONICS | ISO9001:2008 Certified
55
Similar pages