LM386 LM386 Low Voltage Audio Power Amplifier Literature Number: SNAS545A LM386 Low Voltage Audio Power Amplifier General Description Features The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200. The inputs are ground referenced while the output automatically biases to one-half the supply voltage. The quiescent power drain is only 24 milliwatts when operating from a 6 volt supply, making the LM386 ideal for battery operation. n n n n n n n n Battery operation Minimum external parts Wide supply voltage range: 4V–12V or 5V–18V Low quiescent current drain: 4mA Voltage gains from 20 to 200 Ground referenced input Self-centering output quiescent voltage Low distortion: 0.2% (AV = 20, VS = 6V, RL = 8Ω, PO = 125mW, f = 1kHz) n Available in 8 pin MSOP package Applications n n n n n n n n AM-FM radio amplifiers Portable tape player amplifiers Intercoms TV sound systems Line drivers Ultrasonic drivers Small servo drivers Power converters Equivalent Schematic and Connection Diagrams Small Outline, Molded Mini Small Outline, and Dual-In-Line Packages DS006976-2 DS006976-1 © 2000 National Semiconductor Corporation DS006976 Top View Order Number LM386M-1, LM386MM-1, LM386N-1, LM386N-3 or LM386N-4 See NS Package Number M08A, MUA08A or N08E www.national.com LM386 Low Voltage Audio Power Amplifier August 2000 LM386 Absolute Maximum Ratings (Note 2) Dual-In-Line Package Soldering (10 sec) +260˚C Small Outline Package (SOIC and MSOP) Vapor Phase (60 sec) +215˚C Infrared (15 sec) +220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices. Thermal Resistance 37˚C/W θJC (DIP) 107˚C/W θJA (DIP) 35˚C/W θJC (SO Package) 172˚C/W θJA (SO Package) 210˚C/W θJA (MSOP) 56˚C/W θJC (MSOP) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (LM386N-1, -3, LM386M-1) Supply Voltage (LM386N-4) Package Dissipation (Note 3) (LM386N) (LM386M) (LM386MM-1) Input Voltage Storage Temperature Operating Temperature Junction Temperature Soldering Information 15V 22V 1.25W 0.73W 0.595W ± 0.4V −65˚C to +150˚C 0˚C to +70˚C +150˚C Electrical Characteristics (Notes 1, 2) TA = 25˚C Parameter Conditions Min Typ Max Units 12 V Operating Supply Voltage (VS) LM386N-1, -3, LM386M-1, LM386MM-1 4 LM386N-4 Quiescent Current (IQ) 5 VS = 6V, VIN = 0 4 18 V 8 mA Output Power (POUT) LM386N-1, LM386M-1, LM386MM-1 VS = 6V, RL = 8Ω, THD = 10% 250 325 LM386N-3 VS = 9V, RL = 8Ω, THD = 10% 500 700 mW LM386N-4 VS = 16V, RL = 32Ω, THD = 10% 700 1000 mW Voltage Gain (AV) VS = 6V, f = 1 kHz 26 dB mW 10 µF from Pin 1 to 8 46 dB Bandwidth (BW) VS = 6V, Pins 1 and 8 Open 300 kHz Total Harmonic Distortion (THD) VS = 6V, RL = 8Ω, POUT = 125 mW 0.2 % 50 dB 50 kΩ 250 nA f = 1 kHz, Pins 1 and 8 Open Power Supply Rejection Ratio (PSRR) VS = 6V, f = 1 kHz, CBYPASS = 10 µF Pins 1 and 8 Open, Referred to Output Input Resistance (RIN) Input Bias Current (IBIAS) VS = 6V, Pins 2 and 3 Open Note 1: All voltages are measured with respect to the ground pin, unless otherwise specified. Note 2: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions which guarantee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit is given, however, the typical value is a good indication of device performance. Note 3: For operation in ambient temperatures above 25˚C, the device must be derated based on a 150˚C maximum junction temperature and 1) a thermal resistance of 107˚C/W junction to ambient for the dual-in-line package and 2) a thermal resistance of 170˚C/W for the small outline package. www.national.com 2 LM386 Application Hints GAIN CONTROL INPUT BIASING To make the LM386 a more versatile amplifier, two pins (1 and 8) are provided for gain control. With pins 1 and 8 open the 1.35 kΩ resistor sets the gain at 20 (26 dB). If a capacitor is put from pin 1 to 8, bypassing the 1.35 kΩ resistor, the gain will go up to 200 (46 dB). If a resistor is placed in series with the capacitor, the gain can be set to any value from 20 to 200. Gain control can also be done by capacitively coupling a resistor (or FET) from pin 1 to ground. Additional external components can be placed in parallel with the internal feedback resistors to tailor the gain and frequency response for individual applications. For example, we can compensate poor speaker bass response by frequency shaping the feedback path. This is done with a series RC from pin 1 to 5 (paralleling the internal 15 kΩ resistor). For 6 dB effective bass boost: R . 15 kΩ, the lowest value for good stable operation is R = 10 kΩ if pin 8 is open. If pins 1 and 8 are bypassed then R as low as 2 kΩ can be used. This restriction is because the amplifier is only compensated for closed-loop gains greater than 9. The schematic shows that both inputs are biased to ground with a 50 kΩ resistor. The base current of the input transistors is about 250 nA, so the inputs are at about 12.5 mV when left open. If the dc source resistance driving the LM386 is higher than 250 kΩ it will contribute very little additional offset (about 2.5 mV at the input, 50 mV at the output). If the dc source resistance is less than 10 kΩ, then shorting the unused input to ground will keep the offset low (about 2.5 mV at the input, 50 mV at the output). For dc source resistances between these values we can eliminate excess offset by putting a resistor from the unused input to ground, equal in value to the dc source resistance. Of course all offset problems are eliminated if the input is capacitively coupled. When using the LM386 with higher gains (bypassing the 1.35 kΩ resistor between pins 1 and 8) it is necessary to bypass the unused input, preventing degradation of gain and possible instabilities. This is done with a 0.1 µF capacitor or a short to ground depending on the dc source resistance on the driven input. 3 www.national.com LM386 Typical Performance Characteristics Quiescent Supply Current vs Supply Voltage Power Supply Rejection Ratio (Referred to the Output) vs Frequency Peak-to-Peak Output Voltage Swing vs Supply Voltage DS006976-5 DS006976-13 DS006976-12 Voltage Gain vs Frequency Distortion vs Frequency DS006976-15 DS006976-14 Device Dissipation vs Output Power — 4Ω Load Device Dissipation vs Output Power — 8Ω Load DS006976-17 www.national.com Distortion vs Output Power DS006976-18 4 DS006976-16 Device Dissipation vs Output Power — 16Ω Load DS006976-19 LM386 Typical Applications Amplifier with Gain = 20 Minimum Parts Amplifier with Gain = 200 DS006976-4 DS006976-3 Amplifier with Gain = 50 Low Distortion Power Wienbridge Oscillator DS006976-6 DS006976-7 Amplifier with Bass Boost Square Wave Oscillator DS006976-8 DS006976-9 5 www.national.com LM386 Typical Applications (Continued) Frequency Response with Bass Boost DS006976-10 AM Radio Power Amplifier DS006976-11 Note 4: Twist Supply lead and supply ground very tightly. Note 5: Twist speaker lead and ground very tightly. Note 6: Ferrite bead in Ferroxcube K5-001-001/3B with 3 turns of wire. Note 7: R1C1 band limits input signals. Note 8: All components must be spaced very closely to IC. www.national.com 6 LM386 Physical Dimensions inches (millimeters) unless otherwise noted SO Package (M) Order Number LM386M-1 NS Package Number M08A 7 www.national.com LM386 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead (0.118” Wide) Molded Mini Small Outline Package Order Number LM386MM-1 NS Package Number MUA08A www.national.com 8 LM386 Low Voltage Audio Power Amplifier Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Dual-In-Line Package (N) Order Number LM386N-1, LM386N-3 or LM386N-4 NS Package Number N08E LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: [email protected] www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: [email protected] National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated