ERC01-02 THRU ERC01-10 200V-1000V 1.5A PLASTIC SILICON RECTIFIER FEATURES Low cost Diffused junction Low leakage Low forward voltage drop High current capability Easily cleaned with Freon,Alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 MECHANICAL DATA Case:JEDEC DO--15,molded plastic Terminals: Axial lead ,solderable per MIL- STD-202,Method 208 Polarity: Color band denotes cathode Weight: 0.014 ounces,0.39 grams Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. ERC01 -02 ERC01 -04 ERC01 -06 ERC01 -10 UNITS Maximum recurrent peak reverse voltage VRRM 200 400 600 1000 V Maximum RMS voltage VRMS 140 280 420 700 V Maximum DC blocking voltage VDC 200 400 600 1000 V Maximum average forw ard rectified current 9.5mm lead length, @TA=75 IF(AV) 1.5 A IFSM 130.0 A VF 1.0 V Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ =125 Maximum instantaneous forw ard voltage @ 1.5 A Maximum reverse current at rated DC blocking voltage @TA=25 @TA=100 5.0 IR Typical junction capacitance (Note1) CJ 20 Typical thermal resistance (Note2) RθJA 40 TJ - 55---- + 150 TSTG - 55 ---- + 150 Operating junction temperature range Storage temperature range A 50.0 pF /W NOTE: 1. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 2. Thermal resistance f rom junction to ambient. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com ERC01-02 THRU ERC01-10 200V-1000V 1.5A PLASTIC SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES FIG.2 -- JUNCTION CHARACTERISTICS 100 100 JUNCTION CAPACITANCE,pF 10 TJ=25 Pulse Width=300uS 4 2 1.0 AMPERES 0.4 0.1 0.04 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 20 10 4 TJ=25 f=1MHz 2 1 .2 .1 .4 1.0 2 4 100 REVERSE VOLTAGE,VOLTS FIG.3 --CURRENT DERATING CURVE FIG.4 --PEAK FORWARD SURGE CURRENT 1.25 1 0.75 AMPERES 40 INSTANTANEOUS FORWARD VOLTAGE,VOLTS 1.5 PEAK FORWARD SURGE CURRENT 60 2.0 PEAK FORWARD SURGE CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT FIG.1 -- FORWARD CHARACTERISTIC ERC01-02 THRU ERC01-10 Single Phase Half W ave 60H Z Resistive or Inductive Load 0.5 0.25 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, E-mail: [email protected] 160 140 TJ=125 8.3ms Single Half Sine-Wave 120 100 80 60 40 20 0 1 2 4 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz 2 of 2 Web Site: www.taychipst.com