2016-V1.0-0719 Specifications Constant Current LED Power Supplies LCU-30C Series, 30W PAIRUI ELECTRONICS No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2016 led power supplies PRODUCT SPECIFICATION LED Power Supplies for Outdoor Use LCU-30C SERIES, 30WATT, IP67 RATING Features 3 or 5 Year Warranty Universal Input Voltage Range: 90~305Vac Constant Current Output Mode Waterproof Rating IP67 Built-in Active Power Factor Correction Class II Power, no FG Short Circuit, Over Voltage, Over Current Protections 0-10VDimmingOptional Applications √ Garden Light √ Landscape Light √ Cabinet Light √ Other Indoor and Outdoor used Lights √ Stage Light Electrical LC U 30 - C 700 D L Warranty Blank = 3 Year Warranty L = 5 Year Warranty Dimming Blank = No Dimming D = 0-10V Dimming Output Current(mA) Output Mode C = Constant Current Mode Output Power(W) Input Voltage Range U = 90-305Vac Series Name PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:1/9 led power supplies PRODUCT SPECIFICATION Electrical Part Number Nominal Input Voltage Output Current Output Voltage No Load Output Voltage Ripple Efficiency Certificate LCU30-C350 100-277VAC 350mA(52-86V) 96V 40% 89% CE, UL LCU30-C450 100-277VAC 450mA(40-67V) 77V 40% 89% CE, UL LCU30-C700 100-277VAC 700mA(26-43V) 55V 40% 88% CE, UL LCU30-C1050 100-277VAC 1050mA(17-29V) 37V 40% 86% CE, UL NOTE: 1. Other output models are may available on request; 2. Add suffix “D” for 0-10V dimming; 3. Above models are default to 3 year warranty, add suffix “L” for 5 year warranty. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:2/9 led power supplies PRODUCT SPECIFICATION INPUT PARAMETER CONDITIONS MIN TYP MAX UNITS Input voltage 90 305 Vac Input frequency 47 63 Hz Input current Full load, Vin=110Vac Full load, Vin=220Vac Inrush current Cold start, Vin=230Vac Power factor(PF) Full load, Vin=110Vac Full load, Vin=220Vac Surge voltage L-N A A 0.36 0.18 35 A 0.98 0.94 2 KV PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:3/9 led power supplies PRODUCT SPECIFICATION OUTPUT PARAMETER CONDITIONS Output current accuracy MIN TYP MAX UNITS 5 % Line regulation Vin from 100Vac to 277Vac 1 % Load regulation Vout from min. to max. 3 % Output current overshoot Turning on Turn-on delay time Cold start, power on 1000 ms Ripple Please refer to below measurement method 40%Io mAp-p THD Output load≥60% % 10 % 20 NOTE: The values are measured at 20MHz of bandwidth by using a 12'' twisted pair-wire terminated with 0.1uF & 47uF parallel capacitor under ambient temperature 25℃ at rated input voltage and rated load. Protection Short circuit In hiccup mode, it will recover automatically after fault condition is removed Over voltage 110-150% Vout, the driver shall return to normal operation after the power is turn-on again Over current In hiccup mode, it will recover automatically after fault condition is removed PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:4/9 led power supplies PRODUCT SPECIFICATION Environment PARAMETER CONDITIONS MIN Ambient operating temperature Startup at rated voltage (Derating required) Operating relative humidity TYP MAX UNITS -35 +70 ℃ Non condensing 20 90 % Storagetemperature Humidity 10 ~ 95% RH - 40 + 80 ℃ Maximum case temperature Hot-spotoncase + 75 ℃ MTBF Fullload, 220Vac input, 25℃ambient temperature Waterproof rating IP67 Dimension(LxWxH) 113.0 x 41.5 x 30.0mm Weight 220g 200 Khrs Safety/EMC Safety Design refer to UL1310, EN61347, EN61347-2-13 EMC Compliance to EN55015, FCC Part 15 Class B, EN61000-3-2, EN61000-3-3, EN61000-4-2, 3, 4, 6, 8, 11, EN61547 NOTE: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25℃andVin=100Vac to 277Vac. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:5/9 led power supplies PRODUCT SPECIFICATION Mechanical No Dimming AC Input(18AWG*2C) Black(ACL) 41.5 113 DC Output(18AWG*2C) White(ACN) 300±20 8±2 300±20 1 30 8±2 Red(V+) Black(V-) 0-10V Dimming 113 Black(ACL) 41.5 AC Input(18AWG*2C) DC Output(18AWG*2C) 240±20 White(ACN) 300±20 8±2 Red(V+) Black(V-) 300±20 1 30 8±2 8±2 Yellow(10V) Purple(Dim+) Grey(Dim-) PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:6/9 led power supplies PRODUCT SPECIFICATION Electrical Curve STATIC CHARACTERISTIC CURVE 100 100 90 90 80 80 Load(%) Load(%) DERATING CURVE 70 60 50 70 60 50 40 40 30 30 -35 -15 0 15 30 40 50 60 70 90 120 150 180 210 240 270 290 305 Temperature(℃) Input voltage(Vac) Dimming Function DIM+(Purple) 0-10V LED DRIVER DIM-(Grey) Output Current(%) 0-10V Dimming Dim Voltage(V) PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:7/9 led power supplies PRODUCT SPECIFICATION Block Diagram I/P EMI Filter Power Switch Rectifier Filter Over Voltage Protection Overload Protection +V -V Rectifier Filter Detection Circuit PFC PWM Control Package Inner Box L 150 x W 60 x H 30mm Outer Carton L 330 x W 290 x H 280mm SERIES QTY/BOX QTY/CARTON NET WEIGHT GROSS WEIGHT VOLUME LCU-30C 1 piece 56 boxes 12.3kg/carton 13.5kg/carton 0.03CBM/carton PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:8/9 PRODUCT SPECIFICATION led power supplies Labelling Symbol IP67 Description Type of protection(IP67 for indoorandoutdooruse) RoHS Mark WEEE Mark(Wasted Electrical and Electronic Equipment) CE Mark UL & CUL Mark PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0719 Page:9/9