TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com SCHOTTKY BARRIER DIODES – LEADLESS PACKAGE FOR SURFACE MOUNT – METALLURGICALLY BONDED – DOUBLE PLUG CONSTRUCTION Qualified per MIL-PRF-19500/444 DEVICES QUALIFIED LEVELS 1N5711UR-1 1N5712UR-1 1N6857UR-1 1N6858UR-1 CDLL2810 CDLL5711 CDLL5712 JAN JANTX JANTXV CDLL6263 CDLL6857 CDLL6858 MAXIMUM RATING AT 25°C -65°C to +150°C -65°C to +150°C 5711 & 6263 types 2810, 5712 & 6858 types 6857 type all types Operating Temperature: Storage Temperature: Operating Current: :33mA dc @ TEC = +140°C :75mA dc @ TEC = +130°C :150mA dc @ TEC = +110°C :Derate to 0 (zero) mA dc @ +150°C Derating: ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MINIMUM BEAKDOWN VOLTAAGE MAXIMUM FORWARD VOLTAGE MAXIMUM FORWARD VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT VBR @ 10μA VF @ 1mA VF @ I F I R @ VR VOLTS VOLTS 1N5711UR-1 70 1N5712UR-1 20 1N6857UR-1 1N6858UR-1 TYPE NUMBER MAXIMUM CAPACITANCE @ VR = 0 VOLTS f = 1.0MHz CT ESDS CLASS FIGURE 1 nA VOLTS PICO FARADS 0.41 VOLTS @ mA 1.0 @ 15 200 50 2.0 1 0.41 1.0 @ 35 150 16 2.0 1 20 0.35 0.75 @ 35 150 16 4.5 2 70 0.36 0.65 @ 15 200 50 4.5 2 CDLL2810 20 0.41 1.0 @ 35 100 15 2.0 1 CDLL5711 70 0.41 1.0 @ 15 200 50 2.0 1 CDLL5712 20 0.41 1.0 @ 35 150 16 2.0 1 CDLL6263 60 0.41 1.0 @ 15 200 50 2.2 1 CDLL6857 20 0.35 0.75 @ 35 150 16 4.5 2 CDLL6858 70 0.36 0.65 @ 15 200 50 4.5 2 NOTE: 1. 2. Effective Minority Carrier Lifetime (τ) is 100 Pico Seconds Qualification testing to J, JX, JV and JS levels for 6857 and 6858 types is underway. Contact the factory for qualification completion dates. These two part numbers are being introduced by CDI as “drop-in” replacements for the 5711 and 5712. They provide a more robust mechanical design and a higher ESDS class with the only trade-off being an increase in capacitance. T4-LDS-0041 Rev. 1 (100246) Page 1 of 3 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com GRAPHS FIGURE 1 FIGURE 2 I – V Curve Showing Typical Forward Voltage Variation with Temperature for the CDLL2810 and CDLL5712 Schottky Diodes. FIGURE 3 I – V Curve Showing Typical Forward Voltage Variation with Temperature for Schottky Diode CDLL5711. CDLL2810 and CDLL5712 Typical Variation of Reverse Current (IR) vs. Reverse Voltage (VR) at Various Temperatures FIGURE 4 CDLL5711 Typical; Variation of Reverse Current (IR); vs. ReverseVoltage (VR) at Various Temperatures. FIGURE 5 Typical Dynamic Resistance (RD) vs. Forward Current Current (IF) T4-LDS-0041 Rev. 1 (100246) Page 2 of 3 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com PACKAGE DIMENSIONS NOTE: 1. Dimensions are in inches. Millimeters are given for general information only. 2. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology. Symbol BD BL ECT S Dimensions Inches Millimeters Min Max Min Max .063 .067 1.60 1.70 .130 .146 3.30 3.71 .016 .022 0.41 0.55 .001 Min Notes DESIGN DATA CASE: DO-213AA, Hermetically sealed glass case. (MELF, SOD-80, LL34) LEAD FINISH: Tin / Lead THERMAL RESISTANCE: (RθJEC): 100°C/W maximum at L = 0 inch THERMAL IMPEDANCE: (ZθJX): 40°C/W maximum. POLARITY: Cathode end is banded. MOUNTING POSITION SURFACE SELECTION: The Axial Coefficient of Expansion (COE) of this device is approximately +6PPM/°C. The COE of the Mounting Surface System should be selected to provide a suitable match with this device. T4-LDS-0041 Rev. 1 (100246) Page 3 of 3