MMIC Surface Mount Power Splitter/Combiner 2 Way-0° 50Ω EP2W1+ 0.5 to 9.5 GHz The Big Deal • Ultra-wide bandwidth, 0.5 to 9.5 GHz • Tiny size, 5 x 5 x 1mm • High power handling, 2.5W as a splitter CASE STYLE: DG1677-2 Product Overview Mini-Circuits’ EP2W1+ is a MMIC 2-way 0˚ splitter/combiner designed for wideband operation from 0.5 to 9.5 GHz supporting many applications requiring high performance across a wide frequency range including all the LTE bands through WiMax an WiFi, as well as instrumentation and more. This model provides excellent power handling up to 2.5W (as a splitter) with low insertion loss, good isolation, and low phase and amplitude unbalance in a tiny 5x5mm QFN package. Manufactured using GaAs IPD technology, the EP2W1+ provides a high level of ESD protection and excellent repeatability. Key Features Feature Wideband, 0.5 to 9.5 GHz Tiny size, 5 x 5mm QFN package Advantages One power splitter can be used in all the LTE bands through WiMAX and WiFi, saving component count. Also ideal for wideband applications such as military and instrumentation. Tiny footprint saves space in dense layouts while providing low inductance, repeatable transitions, and excellent thermal contact to the PCB. Excellent power handling • 2.5W as a splitter • 1.7W internal dissipation as a combiner In power combiner applications, half the power is dissipated internally. EP2W1+ is designed to handle 1.7W internal dissipation as a combiner allowing reliable operation without excessive temperature rise. Similar splitters implemented as Wilkinson splitters on PCB require big resistors and additional heat sinking. As a splitter, EP2W1+ can handle up to 2.5W in a very small package. DC Passing DC current passing is helpful in applications where both RF & DC need to pass through the DUT, such as antenna mounted hardware. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 4 MMIC Surface Mount Power Splitter/Combiner 2 Way-0° 50Ω EP2W1+ 0.5 to 9.5 GHz Features • Wide bandwidth, 0.5 to 9.5 GHz • Excellent amplitude unbalance, 0.1 dB typ. to 6 GHz • Good phase unbalance, 1 to 3 deg. typ. • Small size, 5x5 mm • High ESD level* • Aqueous washable • DC passing CASE STYLE: DG1677-2 Applications • • • • • • • +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications WIMAX ISM Instrumentation Radar WLAN Satellite communications LTE Electrical Specifications1 at 25°C Parameter Frequency (GHz) Frequency Range Min. Typ. 0.5 Insertion Loss2, above 3.0 dB Isolation Phase Unbalance Amplitude Unbalance VSWR (Port S) VSWR (Port 1-2) Max. Unit 9.5 GHz 0.5 - 1.5 1.5 - 3.0 3.0 - 6.0 6.0 - 9.5 0.5 - 1.5 1.5 - 3.0 3.0 - 6.0 6.0 - 9.5 0.5 - 1.5 1.5 - 3.0 3.0 - 6.0 6.0 - 9.5 0.5 - 1.5 1.5 - 3.0 3.0 - 6.0 6.0 - 9.5 0.5 - 1.5 1.5 - 3.0 3.0 - 6.0 6.0 - 9.5 0.5 - 1.5 — — — — 6.3 16.8 16.4 7.0 — — — — — — — — — — — — — 1.0 1.3 1.8 3.4 9.3 19.8 19.4 10.2 0.5 0.9 1.7 2.5 0.1 0.1 0.1 0.5 1.6 1.5 1.6 1.7 1.3 1.5 1.9 2.5 4.5 — — — — 2.5 2.9 6.0 — 0.3 0.3 0.4 — — — — — — 1.5 - 3.0 — 1.3 — 3.0 - 6.0 — 1.4 — 6.0 - 9.5 — 1.5 — dB dB Degree dB :1 :1 1. Tested on Mini-Circuits Test Board TB-880+ 2. Insertion Loss Values are de-embedded from Test Board Loss. Maximum Ratings Parameter Operating Temperature Storage Temperature Power Input (as a splitter) Internal Dissipation DC Current Pad Connections Ratings Function Pad Number SUM PORT PORT 1 PORT 2 -40°C to 85°C -65°C to 150°C 2.5W3 Max. at 25°C 1.7W4 Max. at 25°C 0.4A Max. 4 15 26 NOT USED, GROUND, EXTERNALLY 3. Derate linearly to 1.25W at 85°C 4. Derate linearly to 1.1W at 85°C 1-3, 5-14, 16-25, 27-32 & Paddle Simplified Electrical Schematic Permanent damage may occur if any of these limits are exceeded. * ESD rating Human body model (HBM): Class 2 (2000 to<4000V) in accordance with ANSI/ESD 5.1-2007 Machine model: Class M3 (200 to <4000V) in accordance with ANSI/ESD 5.2-2009 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. OR M154657 EP2W1+ RS/CP/AM 160809 Page 2 of 4 EP2W1+ MMIC Power Splitter/Combiner Outline Drawing Product Marking PCB Land Pattern MCL EP2W Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .197 5.00 B C MAX C MIN .197 .039 .031 5.00 0.99 0.79 D .008 0.20 E .142 3.61 F .142 3.61 G .009 0.23 K .020 0.51 L .193 4.90 P .012 0.30 Q .035 0.89 R .110 2.79 S 0.008 0.20 M .193 4.90 N .110 2.79 H -' - J .016 0.41 wt grams 0.05 Demo Board MCL P/N: TB-880W+ Suggested PCB Layout (PL-488) Tape and Reel (F68) Tape Width, mm Device Cavity Pitch, mm 12 8 Reel Size, inches 7 7 13 Devices per Reel see note 20 50 Small quantity 100 standard 200 500 Standard 1000 2000 Standard 3000 4000 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 4 EP2W1+ MMIC Power Splitter/Combiner Typical Performance Data Frequency (GHz) Total Loss1 (dB) 100 500 1000 1500 2000 3000 4000 5000 6000 7000 8000 8500 9000 9500 10000 S-1 S-2 3.93 3.92 3.85 3.86 3.85 4.22 4.21 4.48 4.70 5.02 5.20 5.39 5.63 6.19 6.64 3.94 3.92 3.85 3.87 3.86 4.21 4.18 4.39 4.58 4.89 5.06 5.20 5.42 5.81 6.47 Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 0.00 0.00 0.00 0.01 0.00 0.01 0.03 0.09 0.11 0.13 0.14 0.19 0.22 0.38 0.17 5.13 9.39 15.23 20.43 25.99 19.83 28.88 25.69 20.88 22.33 22.91 19.44 16.07 9.92 9.18 0.00 0.01 0.04 0.02 0.10 0.10 0.25 0.23 0.04 0.32 0.30 0.28 0.26 0.47 3.26 1.75 1.61 1.46 1.45 1.26 1.51 1.10 1.13 1.14 1.37 1.12 1.12 1.26 1.70 2.15 1.52 1.30 1.22 1.19 1.09 1.29 1.13 1.34 1.29 1.36 1.29 1.24 1.05 1.45 1.30 VSWR 2 1.52 1.29 1.23 1.22 1.12 1.31 1.09 1.22 1.19 1.25 1.25 1.16 1.11 1.52 1.34 1. Total Loss = Insertion Loss + 3dB splitter loss. EP2W1+ TOTAL LOSS S-1 (dB) 7.0 50 S-2 (dB) ISOLATION (dB) TOTAL LOSS (dB) 8.0 6.0 5.0 4.0 3.0 0 2000 4000 6000 EP2W1+ ISOLATION 8000 10000 FREQUENCY (MHz) 40 30 20 10 0 0 2000 4000 6000 8000 10000 FREQUENCY (MHz) EP2W1+ VSWR 2.5 #S-VSWR #1-VSWR #2-VSWR 2.2 VSWR 1.9 1.6 1.3 1.0 0 2000 4000 6000 FREQUENCY (MHz) 8000 10000 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Notes Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C.A. The parts covered by thisattributes specification document subject to Mini-Circuits standard limitedare warranty terms and and conditions (collectively, “Standard Terms”); Purchasers of this part are Performance and quality and conditions notare expressly stated in this specification document intendedand to be excluded do not form a part of this specification document. B.entitled Electrical and performance data contained in this specification document are basedTerms on Mini-Circuit’s applicable rights established test performance criteriaplease and measurement instructions. to specifications the rights and benefits contained therein. For a full statement of the Standard and the exclusive and remedies thereunder, visit Mini-Circuits’ website at C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled www.minicircuits.com/MCLStore/terms.jsp to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 4