GBJ25005 - GBJ2510 25A GLASS PASSIVATED BRIDGE RECTIFIER Please click here to visit our online spice models database. Features Mechanical Data • • • • • • • • • Glass Passivated Die Construction High Case Dielectric Strength of 2500VRMS Low Reverse Leakage Current Surge Overload Rating to 350A Peak Ideal for Printed Circuit Board Applications UL Listed Under Recognized Component Index, File Number E94661 Lead Free Finish/RoHS Compliant (Note 4) Maximum Ratings Case: GBJ Case Material: Molded Plastic. UL Flammability Classification 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Plated Leads, Solderable per MIL-STD-202, Method 208 Lead Free Plating (Tin Finish). Polarity: Molded on Body Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 in-lbs Maximum Marking: Type Number Weight: 6.6 grams (approximate) • • • • • • • • @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Output Current (Note 1) @ TC = 100°C Non-Repetitive Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on rated Load GBJ 25005 GBJ 2501 GBJ 2502 GBJ 2504 GBJ 2506 GBJ 2508 GBJ 2510 Unit 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V VRRM VRWM VR VR(RMS) IO 25 A IFSM 350 A Thermal Characteristics Characteristic Typical Thermal Resistance Junction to Case Operating and Storage Temperature Range Electrical Characteristics Characteristic Forward Voltage (per element) Peak Reverse Current at Rated DC Blocking Voltage 2 I t Rating for Fusing (t < 8.3ms) Typical Total Capacitance (per element) Notes: (Note 3) Symbol RθJC TJ, TSTG Value 0.6 -65 to +150 Unit °C/W °C Value 1.05 10 500 510 85 Unit V @TA = 25°C unless otherwise specified @ IF = 12.5A @ TC = 25°C @ TC = 125°C (Note 1) (Note 2) Symbol VFM IR 2 It CT µA 2 As pF 1. Non-repetitive, for t > 1ms and < 8.3 ms. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 3. Thermal resistance from junction to case per element. Unit mounted on 220 x 220 x 1.6mm aluminum plate heat sink. 4. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. GBJ25005 - GBJ2510 Document number: DS21221 Rev. 8 - 2 1 of 4 www.diodes.com October 2009 © Diodes Incorporated GBJ25005 - GBJ2510 with heatsink 25 20 15 10 without heatsink 5 Resistive or Inductive load 0 25 100 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 30 50 75 100 125 Tj = 25°C 10 1.0 0.1 0.01 150 0 0.4 1.2 0.8 2.0 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 400 T j = 25°C CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 1,000 Single half-sine-wave 300 200 100 100 10 1 0 1 100 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, Per Element 1,000 100 10 1.0 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics GBJ25005 - GBJ2510 Document number: DS21221 Rev. 8 - 2 2 of 4 www.diodes.com October 2009 © Diodes Incorporated GBJ25005 - GBJ2510 Ordering Information (Note 5) Part Number GBJ25005-F GBJ2501-F GBJ2502-F GBJ2504-F GBJ2506-F GBJ2508-F GBJ2510-F Notes: Case GBJ GBJ GBJ GBJ GBJ GBJ GBJ Packaging 15/Tube 15/Tube 15/Tube 15/Tube 15/Tube 15/Tube 15/Tube 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Package Outline Dimensions GBJ Dim Min Max A 29.70 30.30 B 19.70 20.30 C 17.00 18.00 D 3.80 4.20 E 7.30 7.70 G 9.80 10.20 H 2.00 2.40 I 0.90 1.10 J 2.30 2.70 K 3.0 X 45° L 4.40 4.80 M 3.40 3.80 N 3.10 3.40 P 2.50 2.90 R 0.60 0.80 S 10.80 11.20 All Dimensions in mm L A K M B S _ J P D H N C R I G E GBJ25005 - GBJ2510 Document number: DS21221 Rev. 8 - 2 E 3 of 4 www.diodes.com October 2009 © Diodes Incorporated GBJ25005 - GBJ2510 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com GBJ25005 - GBJ2510 Document number: DS21221 Rev. 8 - 2 4 of 4 www.diodes.com October 2009 © Diodes Incorporated