Filter Coils < Pin Type: FB Series> Type: FB-7G ◆ Product Description ・8.2×8.2mm Max.(L×W), 11.5mm Max. Height. ・Operating frequency:250kHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements. ◆ Feature ・Variable shielded type. ・Two capacitors can be internally mounted in one section. ・Ideally used as Audio Filters(LPF, BPF, Delay Line) ・RoHS Compliance 7 .8 ± 0. 5 1 1 .5 M AX . 3 .0 ± 0 . 5 4 . 5 ± 0 . 15 +0.1 φ 0 . 5 ‑0 . 0 5 7 .8 ± 0 .5 1 .0 ± 0. 2 ◆ Dimensions (mm) 4. 5 ± 0 . 15 ＊ Dimension does not include solder used on coil. ＊ Pin pitch should be measured at the root of terminal. ◆ Testing Circuit Rg1=Rg2=50Ω R in=Rg1+R1=2.7kΩ R out=Rg2+R2 =4.7kΩ C1=1800pF±5％, C2=3900pF±5％ Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 Filter Coils < Pin Type: FB Series> Type: FB-7G ◆ Specification (part number: 5327-T016) Item Specification Input impedance (R in) 2.7kΩ Output impedance (Rout) 4.7kΩ Attenuation Insertion loss Ripple 15kHz 1.7dB Max. 19kHz 30dB Min. 23kHz 17dB Min. 38kHz 32dB Min. 1kHz 1kHz〜13kHz 1.0dB Max. 0±1.6dB within Frequency Response (Attenuation 0dB at 1KHz) Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2